Mario Deile

We present the final report from a series of precision measurements of the muon anomalous magnetic moment, a_mu = (g-2)/2. The details of the experimental method, apparatus, data taking, and analysis are summarized. Data obtained at Brookhaven National Laboratory, using nearly equal samples of positive and negative muons, were used to deduce a_mu(Expt) = 11 659 208.0(5.4)(3.3) x 10^-10, where the statistical and systematic uncertainties are given, respectively. The combined uncertainty of 0.54 ppm represents a 14-fold improvement compared to previous measurements at CERN. The standard model value for a_mu includes contributions from virtual QED, weak, and hadronic processes. While the QED processes account for most of the anomaly, the largest theoretical uncertainty, ~0.55 ppm, is associated with first-order hadronic vacuum polarization. Present standard model evaluations, based on e+e- hadronic cross sections, lie 2.2 - 2.7 standard deviations below the experimental result.

The anomalous magnetic moment of the negative muon has been measured to a precision of 0.7 ppm (ppm) at the Brookhaven Alternating Gradient Synchrotron. This result is based on data collected in 2001, and is over an order of magnitude more precise than the previous measurement for the negative muon. The result a(mu(-))=11 659 214(8)(3) x 10(-10) (0.7 ppm), where the first uncertainty is statistical and the second is systematic, is consistent with previous measurements of the anomaly for the positive and the negative muon. The average of the measurements of the muon anomaly is a(mu)(exp)=11 659 208(6) x 10(-10) (0.5 ppm).

A precise measurement of the anomalous g value, a(mu) = (g-2)/2, for the positive muon has been made at the Brookhaven Alternating Gradient Synchrotron. The result a(mu+) = 11 659 202(14) (6) x 10(-10) (1.3 ppm) is in good agreement with previous measurements and has an error one third that of the combined previous data. The current theoretical value from the standard model is a(mu)(SM) = 11 659 159.6(6.7) x 10(-10) (0.57 ppm) and a(mu)(exp) - a(mu)(SM) = 43(16) x 10(-10) in which a(mu)(exp) is the world average experimental value.

A higher precision measurement of the anomalous g value, a(mu)=(g-2)/2, for the positive muon has been made at the Brookhaven Alternating Gradient Synchrotron, based on data collected in the year 2000. The result a(mu(+))=11 659 204(7)(5)x10(-10) (0.7 ppm) is in good agreement with previous measurements and has an error about one-half that of the combined previous data. The present world average experimental value is a(mu)(expt)=11 659 203(8)x10(-10) (0.7 ppm).

Three independent searches for an electric dipole moment (EDM) of the positive and negative muons have been performed, using spin precession data from the muon g-2 storage ring at Brookhaven National Laboratory. Details on the experimental apparatus and the three analyses are presented. Since the individual results on the positive and negative muon, as well as the combined result, d=-0.1(0.9)E-19 e-cm, are all consistent with zero, we set a new muon EDM limit, |d| < 1.9E-19 e-cm (95% C.L.). This represents a factor of 5 improvement over the previous best limit on the muon EDM.

TOTEM has measured the differential cross-section for elastic proton-proton scattering at the LHC energy of analysing data from a short run with dedicated large-β* optics. A single exponential fit with a slope B=(20.1±0.2stat±0.3syst) GeV−2 describes the range of the four-momentum transfer squared |t| from 0.02 to 0.33 GeV2. After the extrapolation to |t|=0, a total elastic scattering cross-section of (24.8±0.2stat±1.2syst) mb was obtained. Applying the optical theorem and using the luminosity measurement from CMS, a total proton-proton cross-section of (98.3±0.2stat±2.8syst) mb was deduced which is in good agreement with the expectation from the overall fit of previously measured data over a large range of center-of-mass energies. From the total and elastic pp cross-section measurements, an inelastic pp cross-section of was inferred.

At the LHC energy of , under various beam and background conditions, luminosities, and Roman Pot positions, TOTEM has measured the differential cross-section for proton-proton elastic scattering as a function of the four-momentum transfer squared t. The results of the different analyses are in excellent agreement demonstrating no sizeable dependence on the beam conditions. Due to the very close approach of the Roman Pot detectors to the beam center (≈5σbeam) in a dedicated run with β* = 90 m, |t|-values down to 5·10−3 GeV2 were reached. The exponential slope of the differential elastic cross-section in this newly explored |t|-region remained unchanged and thus an exponential fit with only one constant B = (19.9 ± 0.3) GeV−2 over the large |t|-range from 0.005 to 0.2 GeV2 describes the differential distribution well. The high precision of the measurement and the large fit range lead to an error on the slope parameter B which is remarkably small compared to previous experiments. It allows a precise extrapolation over the non-visible cross-section (only 9%) to t = 0. With the luminosity from CMS, the elastic cross-section was determined to be (25.4 ± 1.1) mb, and using in addition the optical theorem, the total pp cross-section was derived to be (98.6 ± 2.2) mb. For model comparisons the t-distributions are tabulated including the large |t|-range of the previous measurement (TOTEM Collaboration (Antchev G. et al), EPL, 95 (2011) 41001).

The TOTEM collaboration has measured the proton-proton total cross section at √s=8 TeV using a luminosity-independent method. In LHC fills with dedicated beam optics, the Roman pots have been inserted very close to the beam allowing the detection of ~90% of the nuclear elastic scattering events. Simultaneously the inelastic scattering rate has been measured by the T1 and T2 telescopes. By applying the optical theorem, the total proton-proton cross section of (101.7±2.9) mb has been determined, well in agreement with the extrapolation from lower energies. This method also allows one to derive the luminosity-independent elastic and inelastic cross sections: σ(el)=(27.1±1.4) mb; σ(inel)=(74.7±1.7) mb.

The TOTEM experiment at the LHC has performed the first luminosity-independent determination of the total proton-proton cross-section at . This technique is based on the optical theorem and requires simultaneous measurements of the inelastic rate – accomplished with the forward charged-particle telescopes T1 and T2 in the range 3.1 < |η| < 6.5 – and of the elastic rate by detecting the outcoming protons with Roman Pot detectors. The data presented here were collected in a dedicated run in 2011 with special beam optics (β* = 90 m) and Roman Pots approaching the beam close enough to register elastic events with squared four-momentum transfers |t| as low as 5·10−3 GeV2. The luminosity-independent results for the elastic, inelastic and total cross-sections are σel = (25.1 ± 1.1) mb, σinel = (72.9 ± 1.5) mb and σtot = (98.0 ± 2.5) mb, respectively. At the same time this method yields the integrated luminosity, in agreement with measurements by CMS. TOTEM has also determined the total cross-section in two complementary ways, both using the CMS luminosity measurement as an input. The first method sums the elastic and inelastic cross-sections and thus does not depend on the ρ parameter. The second applies the optical theorem to the elastic-scattering measurements only and therefore is free of the T1 and T2 measurement uncertainties. The methods, having very different systematic dependences, give results in excellent agreement. Moreover, the ρ-independent measurement makes a first estimate for the ρ parameter at possible: |ρ| = 0.145 ± 0.091.

The TOTEM experiment has made a precise measurement of the elastic proton–proton differential cross-section at the centre-of-mass energy s=8TeV based on a high-statistics data sample obtained with the β⁎=90m optics. Both the statistical and systematic uncertainties remain below 1%, except for the t-independent contribution from the overall normalisation. This unprecedented precision allows to exclude a purely exponential differential cross-section in the range of four-momentum transfer squared 0.027<|t|<0.2GeV2 with a significance greater than 7σ. Two extended parametrisations, with quadratic and cubic polynomials in the exponent, are shown to be well compatible with the data. Using them for the differential cross-section extrapolation to t=0, and further applying the optical theorem, yields total cross-section estimates of (101.5±2.1)mb and (101.9±2.1)mb, respectively, in agreement with previous TOTEM measurements.

The TOTEM Experiment will measure the total pp cross-section with the luminosity-independent method and study elastic and diffractive scattering at the LHC. To achieve optimum forward coverage for charged particles emitted by the pp collisions in the interaction point IP5, two tracking telescopes, T1 and T2, will be installed on each side in the pseudorapidity region 3.1 ⩽ |η| ⩽ 6.5, and Roman Pot stations will be placed at distances of ±147 m and ±220 m from IP5. Being an independent experiment but technically integrated into CMS, TOTEM will first operate in standalone mode to pursue its own physics programme and at a later stage together with CMS for a common physics programme. This article gives a description of the TOTEM apparatus and its performance.

Proton-proton elastic scattering has been measured by the TOTEM experiment at the CERN Large Hadron Collider at in dedicated runs with the Roman Pot detectors placed as close as seven times the transverse beam size (σbeam) from the outgoing beams. After careful study of the accelerator optics and the detector alignment, |t|, the square of four-momentum transferred in the elastic scattering process, has been determined with an uncertainty of . In this letter, first results of the differential cross-section are presented covering a |t|-range from 0.36 to 2.5 GeV2. The differential cross-section in the range 0.36 < |t| < 0.47 GeV2 is described by an exponential with a slope parameter B = (23.6 ± 0.5stat ± 0.4syst) GeV−2, followed by a significant diffractive minimum at |t| = (0.53 ± 0.01stat ± 0.01syst) GeV2. For |t|-values larger than ∼1.5 GeV2, the cross-section exhibits a power law behaviour with an exponent of −7.8 ± 0.3stat ± 0.1syst. When compared to predictions based on the different available models, the data show a strong discriminative power despite the small t-range covered.

The goal of this report is to give a comprehensive overview of the rich field of forward physics, with a special attention to the topics that can be studied at the LHC. The report starts presenting a selection of the Monte Carlo simulation tools currently available, chapter 2, then enters the rich phenomenology of QCD at low, chapter 3, and high, chapter 4, momentum transfer, while the unique scattering conditions of central exclusive production are analyzed in chapter 5. The last two experimental topics, Cosmic Ray and Heavy Ion physics are presented in the chapter 6 and 7 respectively. Chapter 8 is dedicated to the BFKL dynamics, multiparton interactions, and saturation. The report ends with an overview of the forward detectors at LHC. Each chapter is correlated with a comprehensive bibliography, attempting to provide to the interested reader with a wide opportunity for further studies.

The TOTEM experiment at the CERN LHC has measured elastic proton–proton scattering at the centre-of-mass energy $$\sqrt{s}=8\,$$ TeV and four-momentum transfers squared, |t|, from $$6\times 10^{-4}$$ to 0.2 GeV $$^{2}$$ . Near the lower end of the t-interval the differential cross-section is sensitive to the interference between the hadronic and the electromagnetic scattering amplitudes. This article presents the elastic cross-section measurement and the constraints it imposes on the functional forms of the modulus and phase of the hadronic elastic amplitude. The data exclude the traditional Simplified West and Yennie interference formula that requires a constant phase and a purely exponential modulus of the hadronic amplitude. For parametrisations of the hadronic modulus with second- or third-order polynomials in the exponent, the data are compatible with hadronic phase functions giving either central or peripheral behaviour in the impact parameter picture of elastic scattering. In both cases, the $$\rho $$ -parameter is found to be $$0.12 \pm 0.03$$ . The results for the total hadronic cross-section are $$\sigma _\mathrm{tot} = (102.9 \pm 2.3)$$ mb and $$(103.0 \pm 2.3)$$ mb for central and peripheral phase formulations, respectively. Both are consistent with previous TOTEM measurements.

The TOTEM collaboration has measured the proton–proton total cross section at $$\sqrt{s}=13~\hbox {TeV}$$ with a luminosity-independent method. Using dedicated $$\beta ^{*}=90~\hbox {m}$$ beam optics, the Roman Pots were inserted very close to the beam. The inelastic scattering rate has been measured by the T1 and T2 telescopes during the same LHC fill. After applying the optical theorem the total proton–proton cross section is $$\sigma _\mathrm{tot}=(110.6~\pm ~3.4$$ ) mb, well in agreement with the extrapolation from lower energies. This method also allows one to derive the luminosity-independent elastic and inelastic cross sections: $$\sigma _\mathrm{el}=(31.0~\pm ~1.7)~\hbox {mb}$$ and $$\sigma _\mathrm{inel}=(79.5~\pm ~1.8)~\hbox {mb}$$ .

Abstract The TOTEM experiment at the LHC has performed the first measurement at $$\sqrt{s} = 13\,\mathrm{TeV}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:msqrt><mml:mi>s</mml:mi></mml:msqrt><mml:mo>=</mml:mo><mml:mn>13</mml:mn><mml:mspace /><mml:mi>TeV</mml:mi></mml:mrow></mml:math> of the $$\rho $$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mi>ρ</mml:mi></mml:math> parameter, the real to imaginary ratio of the nuclear elastic scattering amplitude at $$t=0$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mi>t</mml:mi><mml:mo>=</mml:mo><mml:mn>0</mml:mn></mml:mrow></mml:math> , obtaining the following results: $$\rho = 0.09 \pm 0.01$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mi>ρ</mml:mi><mml:mo>=</mml:mo><mml:mn>0.09</mml:mn><mml:mo>±</mml:mo><mml:mn>0.01</mml:mn></mml:mrow></mml:math> and $$\rho = 0.10 \pm 0.01$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mi>ρ</mml:mi><mml:mo>=</mml:mo><mml:mn>0.10</mml:mn><mml:mo>±</mml:mo><mml:mn>0.01</mml:mn></mml:mrow></mml:math> , depending on different physics assumptions and mathematical modelling. The unprecedented precision of the $$\rho $$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mi>ρ</mml:mi></mml:math> measurement, combined with the TOTEM total cross-section measurements in an energy range larger than $$10\,\mathrm{TeV}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mn>10</mml:mn><mml:mspace /><mml:mi>TeV</mml:mi></mml:mrow></mml:math> (from 2.76 to $$13\,\mathrm{TeV}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mn>13</mml:mn><mml:mspace /><mml:mi>TeV</mml:mi></mml:mrow></mml:math> ), has implied the exclusion of all the models classified and published by COMPETE. The $$\rho $$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mi>ρ</mml:mi></mml:math> results obtained by TOTEM are compatible with the predictions, from other theoretical models both in the Regge-like framework and in the QCD framework, of a crossing-odd colourless 3-gluon compound state exchange in the t -channel of the proton–proton elastic scattering. On the contrary, if shown that the crossing-odd 3-gluon compound state t -channel exchange is not of importance for the description of elastic scattering, the $$\rho $$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mi>ρ</mml:mi></mml:math> value determined by TOTEM would represent a first evidence of a slowing down of the total cross-section growth at higher energies. The very low-| t | reach allowed also to determine the absolute normalisation using the Coulomb amplitude for the first time at the LHC and obtain a new total proton–proton cross-section measurement $$\sigma _{\mathrm{tot}} = (110.3 \pm 3.5)\,\mathrm{mb}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:msub><mml:mi>σ</mml:mi><mml:mi>tot</mml:mi></mml:msub><mml:mo>=</mml:mo><mml:mrow><mml:mo>(</mml:mo><mml:mn>110.3</mml:mn><mml:mo>±</mml:mo><mml:mn>3.5</mml:mn><mml:mo>)</mml:mo></mml:mrow><mml:mspace /><mml:mi>mb</mml:mi></mml:mrow></mml:math> , completely independent from the previous TOTEM determination. Combining the two TOTEM results yields $$\sigma _{\mathrm{tot}} = (110.5 \pm 2.4)\,\mathrm{mb}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:msub><mml:mi>σ</mml:mi><mml:mi>tot</mml:mi></mml:msub><mml:mo>=</mml:mo><mml:mrow><mml:mo>(</mml:mo><mml:mn>110.5</mml:mn><mml:mo>±</mml:mo><mml:mn>2.4</mml:mn><mml:mo>)</mml:mo></mml:mrow><mml:mspace /><mml:mi>mb</mml:mi></mml:mrow></mml:math> .

Received 22 August 2002DOI:https://doi.org/10.1103/PhysRevLett.89.129903©2002 American Physical Society

The TOTEM experiment at the LHC has measured the inelastic proton-proton cross-section at in a β* = 90 m run with low inelastic pile-up. The measurement was based on events with at least one charged particle in the T2 telescope acceptance of 5.3 < |η| < 6.5 in pseudorapidity. Combined with data from the T1 telescope, covering 3.1 < |η| < 4.7, the cross-section for inelastic events with at least one |η| ⩽ 6.5 final-state particle was determined to be (70.5 ± 2.9) mb. This cross-section includes all central diffractive events of which maximally 0.25 mb is estimated to escape the detection of the telescopes. Based on models for low mass diffraction, the total inelastic cross-section was deduced to be (73.7 ± 3.4) mb. An upper limit of 6.31 mb at 95% confidence level on the cross-section for events with diffractive masses below 3.4 GeV was obtained from the difference between the overall inelastic cross-section obtained by TOTEM using elastic scattering and the cross-section for inelastic events with at least one |η| ⩽ 6.5 final-state particle.

Abstract The TOTEM collaboration has measured the elastic proton-proton differential cross section $$\mathrm{d}\sigma /\mathrm{d}t$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mi>d</mml:mi><mml:mi>σ</mml:mi><mml:mo>/</mml:mo><mml:mi>d</mml:mi><mml:mi>t</mml:mi></mml:mrow></mml:math> at $$\sqrt{s}=13$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:msqrt><mml:mi>s</mml:mi></mml:msqrt><mml:mo>=</mml:mo><mml:mn>13</mml:mn></mml:mrow></mml:math> TeV LHC energy using dedicated $$\beta ^{*}=90$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:msup><mml:mi>β</mml:mi><mml:mrow><mml:mrow /><mml:mo>∗</mml:mo></mml:mrow></mml:msup><mml:mo>=</mml:mo><mml:mn>90</mml:mn></mml:mrow></mml:math> m beam optics. The Roman Pot detectors were inserted to 10 $$\sigma $$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mi>σ</mml:mi></mml:math> distance from the LHC beam, which allowed the measurement of the range [0.04 GeV $$^{2}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:msup><mml:mrow /><mml:mn>2</mml:mn></mml:msup></mml:math> ; 4 GeV $$^{2}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:msup><mml:mrow /><mml:mn>2</mml:mn></mml:msup></mml:math> $$]$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mo>]</mml:mo></mml:math> in four-momentum transfer squared | t |. The efficient data acquisition allowed to collect about 10 $$^{9}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:msup><mml:mrow /><mml:mn>9</mml:mn></mml:msup></mml:math> elastic events to precisely measure the differential cross-section including the diffractive minimum (dip), the subsequent maximum (bump) and the large-| t | tail. The average nuclear slope has been found to be $$B=(20.40 \pm 0.002^{\mathrm{stat}} \pm 0.01^{\mathrm{syst}})~$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mi>B</mml:mi><mml:mo>=</mml:mo><mml:mo>(</mml:mo><mml:mn>20.40</mml:mn><mml:mo>±</mml:mo><mml:mn>0</mml:mn><mml:mo>.</mml:mo><mml:msup><mml:mn>002</mml:mn><mml:mi>stat</mml:mi></mml:msup><mml:mo>±</mml:mo><mml:mn>0</mml:mn><mml:mo>.</mml:mo><mml:msup><mml:mn>01</mml:mn><mml:mi>syst</mml:mi></mml:msup><mml:mo>)</mml:mo><mml:mspace /></mml:mrow></mml:math> GeV $$^{-2}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:msup><mml:mrow /><mml:mrow><mml:mo>-</mml:mo><mml:mn>2</mml:mn></mml:mrow></mml:msup></mml:math> in the | t |-range 0.04–0.2 GeV $$^{2}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:msup><mml:mrow /><mml:mn>2</mml:mn></mml:msup></mml:math> . The dip position is $$|t_{\mathrm{dip}}|=(0.47 \pm 0.004^{\mathrm{stat}} \pm 0.01^{\mathrm{syst}})~$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mrow><mml:mo>|</mml:mo></mml:mrow><mml:msub><mml:mi>t</mml:mi><mml:mi>dip</mml:mi></mml:msub><mml:mrow><mml:mo>|</mml:mo><mml:mo>=</mml:mo></mml:mrow><mml:mrow><mml:mo>(</mml:mo><mml:mn>0.47</mml:mn><mml:mo>±</mml:mo><mml:mn>0</mml:mn><mml:mo>.</mml:mo><mml:msup><mml:mn>004</mml:mn><mml:mi>stat</mml:mi></mml:msup><mml:mo>±</mml:mo><mml:mn>0</mml:mn><mml:mo>.</mml:mo><mml:msup><mml:mn>01</mml:mn><mml:mi>syst</mml:mi></mml:msup><mml:mo>)</mml:mo></mml:mrow><mml:mspace /></mml:mrow></mml:math> GeV $$^{2}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:msup><mml:mrow /><mml:mn>2</mml:mn></mml:msup></mml:math> . The differential cross section ratio at the bump vs. at the dip $$R=1.77\pm 0.01^{\mathrm{stat}}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mi>R</mml:mi><mml:mo>=</mml:mo><mml:mn>1.77</mml:mn><mml:mo>±</mml:mo><mml:mn>0</mml:mn><mml:mo>.</mml:mo><mml:msup><mml:mn>01</mml:mn><mml:mi>stat</mml:mi></mml:msup></mml:mrow></mml:math> has been measured with high precision. The series of TOTEM elastic pp measurements show that the dip is a permanent feature of the pp differential cross-section at the TeV scale.

Abstract The proton–proton elastic differential cross section $${\mathrm{d}}\sigma /{\mathrm{d}}t$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mi>d</mml:mi><mml:mi>σ</mml:mi><mml:mo>/</mml:mo><mml:mi>d</mml:mi><mml:mi>t</mml:mi></mml:mrow></mml:math> has been measured by the TOTEM experiment at $$\sqrt{s}=2.76\hbox { TeV}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:msqrt><mml:mi>s</mml:mi></mml:msqrt><mml:mo>=</mml:mo><mml:mn>2.76</mml:mn><mml:mspace /><mml:mtext>TeV</mml:mtext></mml:mrow></mml:math> energy with $$\beta ^{*}=11\hbox { m}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:msup><mml:mi>β</mml:mi><mml:mrow><mml:mrow /><mml:mo>∗</mml:mo></mml:mrow></mml:msup><mml:mo>=</mml:mo><mml:mn>11</mml:mn><mml:mspace /><mml:mtext>m</mml:mtext></mml:mrow></mml:math> beam optics. The Roman Pots were inserted to 13 times the transverse beam size from the beam, which allowed to measure the differential cross-section of elastic scattering in a range of the squared four-momentum transfer (| t |) from 0.36 to $$0.74\hbox { GeV}^{2}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mn>0.74</mml:mn><mml:mspace /><mml:msup><mml:mtext>GeV</mml:mtext><mml:mn>2</mml:mn></mml:msup></mml:mrow></mml:math> . The differential cross-section can be described with an exponential in the | t |-range between 0.36 and $$0.54\hbox { GeV}^{2}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mn>0.54</mml:mn><mml:mspace /><mml:msup><mml:mtext>GeV</mml:mtext><mml:mn>2</mml:mn></mml:msup></mml:mrow></mml:math> , followed by a diffractive minimum (dip) at $$|t_{\mathrm{dip}}|=(0.61\pm 0.03)\hbox { GeV}^{2}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mrow><mml:mo>|</mml:mo></mml:mrow><mml:msub><mml:mi>t</mml:mi><mml:mi>dip</mml:mi></mml:msub><mml:mrow><mml:mo>|</mml:mo><mml:mo>=</mml:mo><mml:mrow><mml:mo>(</mml:mo><mml:mn>0.61</mml:mn><mml:mo>±</mml:mo><mml:mn>0.03</mml:mn><mml:mo>)</mml:mo></mml:mrow><mml:mspace /></mml:mrow><mml:msup><mml:mtext>GeV</mml:mtext><mml:mn>2</mml:mn></mml:msup></mml:mrow></mml:math> and a subsequent maximum (bump). The ratio of the $${\mathrm{d}}\sigma /{\mathrm{d}}t$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mi>d</mml:mi><mml:mi>σ</mml:mi><mml:mo>/</mml:mo><mml:mi>d</mml:mi><mml:mi>t</mml:mi></mml:mrow></mml:math> at the bump and at the dip is $$1.7\pm 0.2$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mn>1.7</mml:mn><mml:mo>±</mml:mo><mml:mn>0.2</mml:mn></mml:mrow></mml:math> . When compared to the proton–antiproton measurement of the D0 experiment at $$\sqrt{s} = 1.96\hbox { TeV}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:msqrt><mml:mi>s</mml:mi></mml:msqrt><mml:mo>=</mml:mo><mml:mn>1.96</mml:mn><mml:mspace /><mml:mtext>TeV</mml:mtext></mml:mrow></mml:math> , a significant difference can be observed. Under the condition that the effects due to the energy difference between TOTEM and D0 can be neglected, the result provides evidence for the exchange of a colourless C-odd three-gluon compound state in the t -channel of the proton–proton and proton–antiproton elastic scattering.

The spin precession frequency of muons stored in the (g−2) storage ring has been analyzed for evidence of Lorentz and CPT violation. Two Lorentz and CPT violation signatures were searched for a nonzero Δωa(=ωμ+a−ωμ−a) and a sidereal variation of ωμ±a. No significant effect is found, and the following limits on the standard-model extension parameters are obtained: bZ=−(1.0±1.1)×10−23 GeV; (mμdZ0+HXY)=(1.8±6.0)×10−23 GeV; and the 95% confidence level limits ˇbμ+⊥<1.4×10−24 GeV and ˇbμ−⊥<2.6×10−24 GeV.Received 29 September 2007DOI:https://doi.org/10.1103/PhysRevLett.100.091602©2008 American Physical Society

The first double diffractive cross-section measurement in the very forward region has been carried out by the TOTEM experiment at the LHC with center-of-mass energy of sqrt(s)=7 TeV. By utilizing the very forward TOTEM tracking detectors T1 and T2, which extend up to |eta|=6.5, a clean sample of double diffractive pp events was extracted. From these events, we measured the cross-section sigma_DD =(116 +- 25) mub for events where both diffractive systems have 4.7 <|eta|_min < 6.5 .

The TOTEM experiment has measured the charged-particle pseudorapidity density dNch/dη in pp collisions at for 5.3<|η|<6.4 in events with at least one charged particle with transverse momentum above 40 MeV/c in this pseudorapidity range. This extends the analogous measurement performed by the other LHC experiments to the previously unexplored forward η region. The measurement refers to more than 99% of non-diffractive processes and to single and double diffractive processes with diffractive masses above ∼3.4 GeV/c2, corresponding to about 95% of the total inelastic cross-section. The dNch/dη has been found to decrease with |η|, from 3.84 ± 0.01(stat) ± 0.37(syst) at |η|=5.375 to 2.38±0.01(stat)±0.21(syst) at |η|=6.375. Several MC generators have been compared to data; none of them has been found to fully describe the measurement.

The Monitored Drift Tube (MDT) chambers for the muon spectrometer of the ATLAS detector at the Large Hadron Collider (LHC) consist of 3–4 layers of pressurized drift tubes on either side of a space frame carrying an optical monitoring system to correct deformations. The full-scale prototype of a large MDT chamber has been constructed with methods suitable for large-scale production. X-ray measurements at CERN showed a positioning accuracy of the sense wires in the chamber of better than the required 20 μm (rms). The performance of the chamber was studied in a muon beam at CERN. Chamber production for ATLAS now has started.

Proton-proton elastic scattering has been measured by the TOTEM experiment at the CERN Large Hadron Collider at √s = 7 TeV in special runs with the Roman Pot detectors placed as close to the outgoing beam as seven times the transverse beam size. The differential cross-section measurements are reported in the |t|-range of 0.36 to 2.5 GeV2. Extending the range of data to low t values from 0.02 to 0.33 GeV2, and utilizing the luminosity measurements of CMS, the total proton-proton cross section at √s = 7 TeV is measured to be (98.3 ±0.2stat ±2.8syst) mb.

The TOTEM Experiment is designed to measure the total proton-proton cross-section with the luminosity-independent method and to study elastic and diffractive pp scattering at the LHC. To achieve optimum forward coverage for charged particles emitted by the pp collisions in the interaction point IP5, two tracking telescopes, T1 and T2, are installed on each side of the IP in the pseudorapidity region 3.1 < = |eta | < = 6.5, and special movable beam-pipe insertions - called Roman Pots (RP) - are placed at distances of +- 147 m and +- 220 m from IP5. This article describes in detail the working of the TOTEM detector to produce physics results in the first three years of operation and data taking at the LHC.

This paper describes the design and the performance of the timing detector developed by the TOTEM Collaboration for the Roman Pots (RPs) to measure the Time-Of-Flight (TOF) of the protons produced in central diffractive interactions at the LHC . The measurement of the TOF of the protons allows the determination of the longitudinal position of the proton interaction vertex and its association with one of the vertices reconstructed by the CMS detectors. The TOF detector is based on single crystal Chemical Vapor Deposition (scCVD) diamond plates and is designed to measure the protons TOF with about 50 ps time precision. This upgrade to the TOTEM apparatus will be used in the LHC run 2 and will tag the central diffractive events up to an interaction pileup of about 1. A dedicated fast and low noise electronics for the signal amplification has been developed. The digitization of the diamond signal is performed by sampling the waveform. After introducing the physics studies that will most profit from the addition of these new detectors, we discuss in detail the optimization and the performance of the first TOF detector installed in the LHC in November 2015.

The successful operation of the Large Hadron Collider (LHC) and the excellent performance of the ATLAS, CMS, LHCb and ALICE detectors in Run-1 and Run-2 with $pp$ collisions at center-of-mass energies of 7, 8 and 13 TeV as well as the giant leap in precision calculations and modeling of fundamental interactions at hadron colliders have allowed an extraordinary breadth of physics studies including precision measurements of a variety physics processes. The LHC results have so far confirmed the validity of the Standard Model of particle physics up to unprecedented energy scales and with great precision in the sectors of strong and electroweak interactions as well as flavour physics, for instance in top quark physics. The upgrade of the LHC to a High Luminosity phase (HL-LHC) at 14 TeV center-of-mass energy with 3 ab$^{-1}$ of integrated luminosity will probe the Standard Model with even greater precision and will extend the sensitivity to possible anomalies in the Standard Model, thanks to a ten-fold larger data set, upgraded detectors and expected improvements in the theoretical understanding. This document summarises the physics reach of the HL-LHC in the realm of strong and electroweak interactions and top quark physics, and provides a glimpse of the potential of a possible further upgrade of the LHC to a 27 TeV $pp$ collider, the High-Energy LHC (HE-LHC), assumed to accumulate an integrated luminosity of 15 ab$^{-1}$.

Silicon detectors for the Roman Pots of the large hadron collider TOTEM experiment aim for full sensitivity at the edge where a terminating structure is required for electrical stability. This work provides an innovative approach reducing the conventional width of the terminating structure to less than 100 microns, still using standard planar fabrication technology. The objective of this new development is to decouple the electric behaviour of the surface from the sensitive volume within tens of microns. The explanation of the basic principle of this new approach together with the experimental confirmation via electric measurements and beam test are presented in this paper, demonstrating that silicon detectors with this new terminating structure are fully operational and efficient to under 60 microns from the die cut.

This report describes the technical design and outlines the expected performance of the CMS-TOTEM Precision Proton Spectrometer (CT-PPS). CT-PPS adds precision proton tracking and timing detectors in the very forward region on both sides of CMS at about 200m from the IP to study central exclusive production (CEP) in proton-proton collisions. CEP provides a unique method to access a variety of physics topics at high luminosity LHC, such as new physics via anomalous production of $W$ and $Z$ boson pairs, high-$p_T$ jet production, and possibly the production of new resonances. The CT-PPS detector consists of a silicon tracking system to measure the position and direction of the protons, and a set of timing counters to measure their arrival time with a precision of the order of 10 ps. This in turn allows the reconstruction of the mass and momentum as well as of the $z$ coordinate of the primary vertex of the centrally produced system. The framework for the development and exploitation of CT-PPS is defined in a Memorandum of Understanding signed by CERN as the host laboratory and the CMS and TOTEM Collaborations. The expected performance of CT-PPS is discussed, including detailed studies of exclusive WW and dijet production. The planning for the implementation of the new detectors is presented, including construction, testing, and installation.

The pseudorapidity density of charged particles dN $$_{ ch }$$ /d $$\eta $$ is measured by the TOTEM experiment in proton–proton collisions at $$\sqrt{s} = 8$$ TeV within the range $$3.9<\eta <4.7$$ and $$-6.95<\eta <-6.9$$ . Data were collected in a low intensity LHC run with collisions occurring at a distance of 11.25 m from the nominal interaction point. The data sample is expected to include 96–97 % of the inelastic proton–proton interactions. The measurement reported here considers charged particles with $$p_T>0$$ MeV/c, produced in inelastic interactions with at least one charged particle in $$-7<\eta <-6$$ or $$3.7<\eta <4.8$$ . The dN $$_{ ch }$$ /d $$\eta $$ has been found to decrease with $$|\eta |$$ , from 5.11 $$\pm $$ 0.73 at $$\eta =3.95$$ to 1.81 $$\pm $$ 0.56 at $$\eta =-$$ 6.925. Several Monte Carlo generators are compared to the data and are found to be within the systematic uncertainty of the measurement.

Precise knowledge of the beam optics at the LHC is crucial to fulfil the physics goals of the TOTEM experiment, where the kinematics of the scattered protons is reconstructed with the near-beam telescopes -- so-called Roman Pots (RP). Before being detected, the protons' trajectories are influenced by the magnetic fields of the accelerator lattice. Thus precise understanding of the proton transport is of key importance for the experiment. A novel method of optics evaluation is proposed which exploits kinematical distributions of elastically scattered protons observed in the RPs. Theoretical predictions, as well as Monte Carlo studies, show that the residual uncertainty of this optics estimation method is smaller than 0.25 percent.

Abstract The TOTEM collaboration at the CERN LHC has measured the differential cross-section of elastic proton–proton scattering at $$\sqrt{s} = 8\,\mathrm{TeV}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow> <mml:msqrt> <mml:mi>s</mml:mi> </mml:msqrt> <mml:mo>=</mml:mo> <mml:mn>8</mml:mn> <mml:mspace /> <mml:mi>TeV</mml:mi> </mml:mrow> </mml:math> in the squared four-momentum transfer range $$0.2\,\mathrm{GeV^{2}}&lt; |t| &lt; 1.9\,\mathrm{GeV^{2}}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow> <mml:mn>0.2</mml:mn> <mml:mspace /> <mml:msup> <mml:mi>GeV</mml:mi> <mml:mn>2</mml:mn> </mml:msup> <mml:mo>&lt;</mml:mo> <mml:mrow> <mml:mo>|</mml:mo> <mml:mi>t</mml:mi> <mml:mo>|</mml:mo> </mml:mrow> <mml:mo>&lt;</mml:mo> <mml:mn>1.9</mml:mn> <mml:mspace /> <mml:msup> <mml:mi>GeV</mml:mi> <mml:mn>2</mml:mn> </mml:msup> </mml:mrow> </mml:math> . This interval includes the structure with a diffractive minimum (“dip”) and a secondary maximum (“bump”) that has also been observed at all other LHC energies, where measurements were made. A detailed characterisation of this structure for $$\sqrt{s} = 8\,\mathrm{TeV}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow> <mml:msqrt> <mml:mi>s</mml:mi> </mml:msqrt> <mml:mo>=</mml:mo> <mml:mn>8</mml:mn> <mml:mspace /> <mml:mi>TeV</mml:mi> </mml:mrow> </mml:math> yields the positions, $$|t|_{\mathrm{dip}} = (0.521 \pm 0.007)\,\mathrm{GeV^2}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow> <mml:msub> <mml:mrow> <mml:mo>|</mml:mo> <mml:mi>t</mml:mi> <mml:mo>|</mml:mo> </mml:mrow> <mml:mi>dip</mml:mi> </mml:msub> <mml:mo>=</mml:mo> <mml:mrow> <mml:mo>(</mml:mo> <mml:mn>0.521</mml:mn> <mml:mo>±</mml:mo> <mml:mn>0.007</mml:mn> <mml:mo>)</mml:mo> </mml:mrow> <mml:mspace /> <mml:msup> <mml:mi>GeV</mml:mi> <mml:mn>2</mml:mn> </mml:msup> </mml:mrow> </mml:math> and $$|t|_{\mathrm{bump}} = (0.695 \pm 0.026)\,\mathrm{GeV^2}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow> <mml:msub> <mml:mrow> <mml:mo>|</mml:mo> <mml:mi>t</mml:mi> <mml:mo>|</mml:mo> </mml:mrow> <mml:mi>bump</mml:mi> </mml:msub> <mml:mo>=</mml:mo> <mml:mrow> <mml:mo>(</mml:mo> <mml:mn>0.695</mml:mn> <mml:mo>±</mml:mo> <mml:mn>0.026</mml:mn> <mml:mo>)</mml:mo> </mml:mrow> <mml:mspace /> <mml:msup> <mml:mi>GeV</mml:mi> <mml:mn>2</mml:mn> </mml:msup> </mml:mrow> </mml:math> , as well as the cross-section values, $$\left. {\mathrm{d}\sigma /\mathrm{d}t}\right| _{\mathrm{dip}} = (15.1 \pm 2.5)\,\mathrm{{\mu b/GeV^2}}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow> <mml:msub> <mml:mfenced> <mml:mrow> <mml:mi>d</mml:mi> <mml:mi>σ</mml:mi> <mml:mo>/</mml:mo> <mml:mi>d</mml:mi> <mml:mi>t</mml:mi> </mml:mrow> </mml:mfenced> <mml:mi>dip</mml:mi> </mml:msub> <mml:mo>=</mml:mo> <mml:mrow> <mml:mo>(</mml:mo> <mml:mn>15.1</mml:mn> <mml:mo>±</mml:mo> <mml:mn>2.5</mml:mn> <mml:mo>)</mml:mo> </mml:mrow> <mml:mspace /> <mml:mrow> <mml:mi>μ</mml:mi> <mml:mi>b</mml:mi> <mml:mo>/</mml:mo> <mml:msup> <mml:mi>GeV</mml:mi> <mml:mn>2</mml:mn> </mml:msup> </mml:mrow> </mml:mrow> </mml:math> and $$\left. {\mathrm{d}\sigma /\mathrm{d}t}\right| _{\mathrm{bump}} = (29.7 \pm 1.8)\,\mathrm{{\mu b/GeV^2}}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow> <mml:msub> <mml:mfenced> <mml:mrow> <mml:mi>d</mml:mi> <mml:mi>σ</mml:mi> <mml:mo>/</mml:mo> <mml:mi>d</mml:mi> <mml:mi>t</mml:mi> </mml:mrow> </mml:mfenced> <mml:mi>bump</mml:mi> </mml:msub> <mml:mo>=</mml:mo> <mml:mrow> <mml:mo>(</mml:mo> <mml:mn>29.7</mml:mn> <mml:mo>±</mml:mo> <mml:mn>1.8</mml:mn> <mml:mo>)</mml:mo> </mml:mrow> <mml:mspace /> <mml:mrow> <mml:mi>μ</mml:mi> <mml:mi>b</mml:mi> <mml:mo>/</mml:mo> <mml:msup> <mml:mi>GeV</mml:mi> <mml:mn>2</mml:mn> </mml:msup> </mml:mrow> </mml:mrow> </mml:math> , for the dip and the bump, respectively.

TOTEM Roman Pot (RP) microstrip edgeless silicon detectors, fabricated with standard planar technology, reach full sensitivity within 50 μm from the cut edge and can operate with high bias voltage at room temperature. These detectors use a newly developed terminating structure, which prevents breakdown and surface current injection at high bias, while simultaneously providing extremely reduced dead zones at the edges. Moreover, radiation hardness studies indicate that when operated under moderate cooling, the detectors remain fully efficient up to a fluence of about 1.5×1014 p cm−2. The mass production of these detectors for the TOTEM Experiment is being completed and their installation in the Roman Pots is ongoing. When the installation is complete and the LHC will be operational, these detectors will allow the TOTEM Experiment to detect leading protons at distance of ∼1 mm from the beam centre at the LHC. This work presented here is a survey of this recently developed device and its most up-to-date characterisations.

Abstract The TOTEM experiment, small in size compared to the others at the LHC, is dedicated to the measurement of the total proton–proton cross-sections with a luminosity-independent method and to the study of elastic and diffractive scattering at the LHC. To achieve optimum forward coverage for charged particles emitted by the pp collisions in the IP5 interaction point, two tracking telescopes, T1 and T2, will be installed on each side in the pseudo-rapidity region between 3.1 and 6.5, and Roman Pot stations will be placed at distances of 147 and 220 m from IP5. The telescope closest to the interaction point (T1, centred at z=9 m) consists of Cathode Strip Chambers (CSC), while the second one (T2, centred at 13.5 m), makes use of Gas Electron Multipliers (GEM). The proton detectors in the Roman Pots are silicon devices designed by TOTEM with the specific objective of reducing down to a few tens of microns the insensitive area at the edge. High efficiency as close as possible to the physical detector boundary is an essential feature. It maximizes the experimental acceptance for protons scattered elastically or interactively at polar angles down to a few micro-radians at IP5. To measure protons at the lowest possible emission angles, special beam optics have been conceived to optimize proton detection in terms of acceptance and resolution. The read-out of all TOTEM subsystems is based on the custom-developed digital VFAT chip with trigger capability.

The TOTEM experiment will detect leading protons scattered in angles of microradians from the interaction point at the large hadron collider. This will be achieved using detectors with a minimized dead area at the edge. The collaboration has developed an innovative structure at the detector edge reducing the conventional dead width to less than 100 μm, still using standard planar fabrication technology. In this new development, the current of the surface is decoupled from the sensitive volume current within a few tens of micrometers. The basic working principle is explained in this paper. Final size detectors have been produced using this approach. The current–voltage and current–temperature characteristics of the detectors were studied and the detectors were successfully tested in a coasting beam experiment.

For the muon spectrometer of the ATLAS detector at the Large Hadron Collider (LHC), large drift chambers consisting of 6–8 layers of pressurized drift tubes are used for precision tracking covering an active area of 5000m2 in the toroidal field of superconducting air-core magnets. The chambers have to provide a spatial resolution of 41μm with Ar:CO2 (93:7) gas mixture at an absolute pressure of 3bar and gas gain of 2×104. The environment in which the chambers will be operated is characterized by high neutron and γ background with counting rates of up to 100s−1cm−2. The resolution and efficiency of a chamber from the serial production for ATLAS has been investigated in a 100GeV muon beam at photon irradiation rates as expected during LHC operation. A silicon strip detector telescope was used as external reference in the beam. The spatial resolution of a chamber is degraded by 4μm at the highest background rate. The detection efficiency of the drift tubes is unchanged under irradiation. A tracking efficiency of 98% at the highest rates has been demonstrated.

3D detectors with electrodes penetrating through the silicon wafer and covering the edges were tested in the SPS beam line X5 at CERN in autumn 2003. Detector parameters including efficiency, signal-to-noise ratio, and edge sensitivity were measured using a silicon telescope as a reference system. The measured sensitive width and the known silicon width were equal within less than 10 mum.

The impact of high counting rates on the spatial resolution of cylindrical drift tubes is investigated in detail and the results are compared with simulations. Electronics effects and space-charge effects are quantitatively analysed. A spatial resolution of σ<80μm can be achieved even at rates as high as 1500 Hz/cm wire length (300 kHz per wire).

Beam collimation in high-energy colliders is customarily carried out by means of massive amorphous absorbers surrounding the circulating beam. Several studies were performed in the last decades to establish an innovative collimation technique that relies on particle deflection by means of channeling between crystalline planes of a bent crystal. We report the operational use of crystal collimation in the Large Hadron Collider that was achieved during a special high-${\ensuremath{\beta}}^{\ensuremath{\ast}}$ physics run with low-intensity beams, representing a milestone for both accelerator and high-energy physics that could pave the way for new synergies in the near future. The deployment of this scheme was steered and motivated by machine-simulation studies, which were then confirmed experimentally using data provided by the experiments thanks to a sensitivity not accessible with the ring instrumentation. The evidence of beam-related experimental background reduction, improved data quality, and faster halo removal with respect to amorphous collimators is obtained using bent crystals as the primary collimation stage. A detailed description of preparatory studies and operational performance is reported, together with a comparison between experimental results and theoretical expectations.

Measurements of the drift-tube response to charged particle tracks are compared with a complete simulation. The measured resolution of typically 80μm agrees well with the simulation and allows the individual factors limiting the resolution such as diffusion, charge deposit fluctuations, gas gain fluctuations and signal processing to be studied. The results with respect to the dependence of the drift chamber resolution on gas gain, gas pressure and electronics parameters are reported.

In the muon (g-2) experiment at Brookhaven National Laboratory, the spin precession frequency ωa is obtained from a standard χ2 minimization fit applied to the time distribution of decay electrons. The unusually high accuracy (∼0.5ppm) of the experiment puts stringent requirements on the quality of the fit and the level of understanding of the statistical properties of the fitted parameters. We discuss the properties of the fits and their implications on the derived value for ωa, including estimates of the effect of an imperfect fit function, methods of including additional external information to reduce the error, the effects of splitting the data into many smaller subsets of data, applying different weighting methods to the data using energy information, and various tests of data suitability.

D-electrode pixel detectors are proposed in which the bias electrodes are connected to form a strip readout on the same or opposite side of the sensor. It can provide a fast trigger and significantly increase spatial resolution in both directions. This combination is also possible with double-sided processing in planar technology. A second paper (''Dual Readout—3D Direct/Induced-Signals Pixel Systems'') will cover another means of increasing spatial resolution without duplicating the complex pixel electronics. & 2008 Elsevier B.V. All rights reserved.

Proceedings of the 13th International Conference on Elastic and Diffractive Scattering (Blois Workshop) - Moving Forward into the LHC Era

Since June 2011, the rapid increase of the luminosity performance of the LHC has come at the expense of increased temperature and pressure readings on specific near-beam LHC equipment. In some cases, this beam induced heating has caused delays whilie equipment cools down, beam dumps and even degradation of these devices. This contribution gathers the observations of beam induced heating attributable to beam coupling impedance, their current level of understanding and possible actions that are planned to be implemented during the long shutdown in 2013-2014.

The TOTEM collaboration has measured the proton-proton total cross section at $\sqrt{s}=13$ TeV with a luminosity-independent method. Using dedicated $β^{*}=90$ m beam optics, the Roman Pots were inserted very close to the beam. The inelastic scattering rate has been measured by the T1 and T2 telescopes during the same LHC fill. After applying the optical theorem the total proton-proton cross section is $σ_{\rm tot}=(110.6 \pm 3.4$) mb, well in agreement with the extrapolation from lower energies. This method also allows one to derive the luminosity-independent elastic and inelastic cross sections: $σ_{\rm el} = (31.0 \pm 1.7)$ mb and $σ_{\rm inel} = (79.5 \pm 1.8)$ mb.

The CMS and TOTEM experiments intend to carry out a joint diffractive/forward physics program with an unprecedented rapidity coverage. The present document outlines some aspects of such a physics program, which spans from the investigation of the low-x structure of the proton to the diffractive production of a SM or MSSM Higgs boson.

The physics programme of the TOTEM experiment requires the detection of very forward protons scattered by only a few microradians out of the LHC beams. For this purpose, stacks of planar Silicon detectors have been mounted in moveable near-beam telescopes (Roman Pots) located along the beamline on both sides of the interaction point. In order to maximise the proton acceptance close to the beams, the dead space at the detector edge had to be minimised. During the detector prototyping phase, different sensor technologies and designs have been explored. A reduction of the dead space to less than 50 μm has been accomplished with two novel silicon detector technologies: one with the Current Terminating Structure (CTS) design and one based on the 3D edge manufacturing. This paper describes performance studies on prototypes of these detectors, carried out in 2004 in a fixed-target muon beam at CERN's SPS accelerator. In particular, the efficiency and accuracy in the vicinity of the beam-facing edges are discussed.

3D-electrode pixel detectors are proposed in which the bias electrodes are connected to form a strip readout on the same or opposite side of the sensor. It can provide a fast trigger and significantly increase spatial resolution in both directions. This combination is also possible with double-sided processing in planar technology. A second paper (“Dual Readout—3D Direct/Induced-Signals Pixel Systems”) will cover another means of increasing spatial resolution without duplicating the complex pixel electronics.

The TOTEM experiment at the LHC has performed the first measurement at $\sqrt{s} = 13$ TeV of the $\rho$ parameter, the real to imaginary ratio of the nuclear elastic scattering amplitude at $t=0$, obtaining the following results: $\rho = 0.09 \pm 0.01$ and $\rho = 0.10 \pm 0.01$, depending on different physics assumptions and mathematical modelling. The unprecedented precision of the $\rho$ measurement, combined with the TOTEM total cross-section measurements in an energy range larger than 10 TeV (from 2.76 to 13 TeV), has implied the exclusion of all the models classified and published by COMPETE. The $\rho$ results obtained by TOTEM are compatible with the predictions, from alternative theoretical models both in the Regge-like framework and in the QCD framework, of a colourless 3-gluon bound state exchange in the $t$-channel of the proton-proton elastic scattering. On the contrary, if shown that the 3-gluon bound state $t$-channel exchange is not of importance for the description of elastic scattering, the $\rho$ value determined by TOTEM would represent a first evidence of a slowing down of the total cross-section growth at higher energies. The very low-$|t|$ reach allowed also to determine the absolute normalisation using the Coulomb amplitude for the first time at the LHC and obtain a new total proton-proton cross-section measurement $\sigma_{tot} = 110.3 \pm 3.5$ mb, completely independent from the previous TOTEM determination. Combining the two TOTEM results yields $\sigma_{tot} = 110.5 \pm 2.4$ mb.

The monitored drift tube (MDT) chambers for the muon spectrometer of the ATLAS detector at the Large Hadron Collider (LHC) consist of three or four layers of pressurised drift tubes on either side of a space frame carrying an optical deformation monitoring system. The chambers have to provide a track position resolution of 40 /spl mu/m with a single-tube resolution of at least 80 /spl mu/m and a sense wire positioning accuracy of 20 /spl mu/m (rms). The feasibility was demonstrated with the full-scale prototype of one of the largest MDT chambers with 432 drift tubes of 3.8 m length. For the ATLAS muon spectrometer, 88 chambers of this type have to be built. The first chamber has been completed with a wire positioning accuracy of 14 /spl mu/m (rms).

2nd workshop on the implications of HERA for LHC physics. Working groups: Parton Density Functions Multi-jet final states and energy flows Heavy quarks (charm and beauty) Diffraction Cosmic Rays Monte Carlos and Tools

The resolution and efficiency of a precision drift-tube chamber for the ATLAS muon spectrometer with final read-out electronics was tested at the Gamma Irradiation Facility at CERN in a 100GeV muon beam at photon irradiation rates of up to 990Hz/cm2, which corresponds to twice the highest background rate expected in ATLAS. A silicon strip detector telescope served as external reference in the beam. The pulse-height measurement of the read-out electronics was used to perform time-slewing corrections, which lead to an improvement of the average drift-tube resolution from 104 to 82μm without irradiation, and from 128 to 108μm at the maximum expected rate. The measured drift-tube efficiency agrees with the expectation from the dead time of the read-out electronics up to the maximum expected rate.

In this paper, 3D-electrode pixel detectors are described, in which the bias electrode systems have additional elements. Adding resistors between the bias supply line and each bias electrode together with a signal electrode readout that can measure pulse heights of both polarities could simultaneously provide lower capacitance and improved spatial resolution in both directions. A separate paper (“Dual-readout—strip/pixel systems”) covers an alternative—pixels with an added strip readout in one direction which could be used with either planar or 3D-electrodes, and could simultaneously provide a fast trigger and significantly increase the spatial resolution in both directions.

Proceedings of the 13th International Conference on Elastic and Diffractive Scattering (Blois Workshop) - Moving Forward into the LHC Era

Abstract A front-end electronics readout for drift tubes in a high-rate environment is presented. This system allows us to encode several pieces of information (leading edge time, trailing edge time, signal charge and piled-up hits from multiple tracks) into a single readout channel that is presented to the TDC. The advantage of active baseline restoration compared to bipolar signal shaping is discussed.

The magnetic moment anomaly a_mu = (g_mu - 2) / 2 of the positive muon has been measured at the Brookhaven Alternating Gradient Synchrotron with an uncertainty of 0.7 ppm. The new result, based on data taken in 2000, agrees well with previous measurements. Standard Model evaluations currently differ from the experimental result by 1.6 to 3.0 standard deviations.

The TOTEM experiment is dedicated to the measurement of the total proton–proton cross-section with the luminosity-independent method and the study of elastic and diffractive scattering processes. Two tracking telescopes, T1 and T2, integrated in the CMS detector, cover the pseudo-rapidity region between 3.1 and 6.5 on both sides of the interaction point IP5. The Roman Pot (RP) stations are located at distances of ±147 m and ±220 m with respect to the interaction point to measure the very forward scattered protons at very small angles. During the LHC technical stop in winter 2010/2011, the TOTEM experiment was completed with the installation of the T1 telescope and the RP stations at ±147 m. In 2011, the LHC machine provided special optics with the large ß⁎=90 m, allowing TOTEM to measure the elastic scattering differential cross-section, down to the four-momentum transfer squared |t|=2×10−2 GeV2. Using the optical theorem and extrapolation of the differential cross-section to t=0 (optical point), the total p–p cross-section at the LHC energy of s=7TeV could be computed for the first time. Furthermore we measured with standard LHC beam optics and the energy of s=7TeV the forward charged particle pseudorapidity density dn/dη in the range of 5.3<|η|<6.4. The status of the experiment, the performance of the detectors with emphasis on the RPs are described and the first physics results are presented.

The TOTEM collaboration has developed and tested the first prototype of its Roman Pots to be operated in the LHC. TOTEM Roman Pots contain stacks of silicon detectors with strips oriented in two orthogonal directions. To measure proton scattering angles of a few microradians, the detectors will approach the beam centre to a distance of 10σ + 0.5 mm (= 1.3 mm). Dead space near the detector edge is minimised by using two novel "edgeless" detector technologies. The silicon detectors are used both for precise track reconstruction and for triggering. The first full-sized prototypes of both detector technologies as well as their read-out electronics have been developed, built and operated. The tests took place in the proton beam-line of the SPS accelerator ring. In addition, the pot's shielding against electromagnetic interference and the longitudinal beam coupling impedance have been measured with the wire method.

The LHC machine will be equipped with Roman Pot stations by the TOTEM [1] experiment. The special optics required by TOTEM, and safety considerations for the machine protection set the limit to 10σ, i.e. 800 µm. Such unprecedented parameters, have requested a new design for the Roman Pot system. To better meet also the challenging requirements of TOTEM, a technology development of a thin window with high planarity has been pursued. Prototypes of the Roman Pot thin window have been manufactured and tested. We describe the main issues of the final design and the results of the preliminary tests.

At the Tevatron, the total p_bar-p cross-section has been measured by CDF at 546 GeV and 1.8 TeV, and by E710/E811 at 1.8 TeV. The two results at 1.8 TeV disagree by 2.6 standard deviations, introducing big uncertainties into extrapolations to higher energies. At the LHC, the TOTEM collaboration is preparing to resolve the ambiguity by measuring the total p-p cross-section with a precision of about 1 %. Like at the Tevatron experiments, the luminosity-independent method based on the Optical Theorem will be used. The Tevatron experiments have also performed a vast range of studies about soft and hard diffractive events, partly with antiproton tagging by Roman Pots, partly with rapidity gap tagging. At the LHC, the combined CMS/TOTEM experiments will carry out their diffractive programme with an unprecedented rapidity coverage and Roman Pot spectrometers on both sides of the interaction point. The physics menu comprises detailed studies of soft diffractive differential cross-sections, diffractive structure functions, rapidity gap survival and exclusive central production by Double Pomeron Exchange.

The resolution and efficiency of a precision drift-tube chamber for the ATLAS muon spectrometer with final read-out electronics was tested at the Gamma Irradiation Facility at CERN in a 100GeV muon beam at photon irradiation rates of up to 990Hz/cm2, which corresponds to twice the highest background rate expected in ATLAS. A silicon strip detector telescope served as external reference in the beam. The pulse-height measurement of the read-out electronics was used to perform time-slewing corrections, which lead to an improvement of the average drift-tube resolution from 104 to 82μm without irradiation, and from 128 to 108μm at the maximum expected rate. The measured drift-tube efficiency agrees with the expectation from the dead time of the read-out electronics up to the maximum expected rate.

The TOTEM experiment at the LHC has extended the measurement of the differential cross-section for elastic proton-proton scattering at s = 7TeV to four-momentum transfers |t| as low as 5×10−3 GeV2. The new data were collected in different dedicated runs with a special beam optics (β* = 90m) and Roman Pot detectors placed as close as 4.8 times the transverse beam size from the outgoing beams. In addition, the accompanying inelastic rates were recorded with the forward telescopes T1 and T2 for 3.1 < |η| < 6.5. Thus the first measurement of the total protonproton cross-section with the luminosity-independent method based on the optical theorem could be performed. Alternatively, using the CMS luminosity measurement as an input, two additional total crosssection determinations with different systematic dependences were obtained: (a) as the direct sum of the elastic and inelastic cross-sections, and (b) calculated from only the elastic cross-section extrapolated to t = 0, as published previously [1] for an earlier data set. The results from all methods and data sets agree very well within their uncertainties.

The TOTEM experiment is dedicated to the measurement of the total proton-proton cross-section with the luminosity-independent method and the study of elastic and diffractive scattering processes. Two tracking telescopes, T1 and T2, integrated in the CMS detector, cover the pseudo-rapidity region between 3.1 and 6.5 on both sides of the interaction point IP5. The Roman Pot (RP) stations are located at distances of ± 147m and ± 220 m with respect to the interaction point to measure the very forward scattered protons at very small angles. During the LHC technical stop in winter 2010/2011, the TOTEM experiment was completed with the installation of the T1 telescope and the RP stations at ± 147 m. In 2011, the LHC machine provided special optics with the large ß* = 90 m, allowing TOTEM to measure the elastic scattering differential cross section, down to the four-momentum transfer squared |t| = 2×10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">−2</sup> GeV <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> . Using the optical theorem and extrapolation of the differential cross section to t = 0 (optical point), the total p-p cross section at the LHC energy of √v = 7 TeV could be computed for the first time. The status of the experiment, the performance of the detectors with emphasis on the RPs are described and the first physics results are presented.

The pseudorapidity density of charged particles dN(ch)/deta is measured by the TOTEM experiment in pp collisions at sqrt(s) = 8 TeV within the range 3.9 &lt; eta &lt; 4.7 and -6.95 &lt; eta &lt; -6.9. Data were collected in a low intensity LHC run with collisions occurring at a distance of 11.25 m from the nominal interaction point. The data sample is expected to include 96-97\% of the inelastic proton-proton interactions. The measurement reported here considers charged particles with p_T &gt; 0 MeV/c, produced in inelastic interactions with at least one charged particle in -7 &lt; eta &lt; -6 or 3.7 &lt; eta &lt;4.8 . The dN(ch)/deta has been found to decrease with |eta|, from 5.11 +- 0.73 at eta = 3.95 to 1.81 +- 0.56 at eta= - 6.925. Several MC generators are compared to the data and are found to be within the systematic uncertainty of the measurement.

Since the LHC running season 2010, the TOTEM Roman Pots (RPs) are fully operational and serve for collecting elastic and diffractive proton-proton scattering data. Like for other moveable devices approaching the high intensity LHC beams, a reliable and precise control of the RP position is critical to machine protection. After a review of the RP movement control and position interlock system, the crucial task of alignment will be discussed.

This article discusses the physics programme of the TOTEM experiment at the LHC. A new special beam optics with beta* = 90 m, enabling the measurements of the total cross-section, elastic pp scattering and diffractive phenomena already at early LHC runs, is explained. For this and the various other TOTEM running scenarios, the acceptances of the leading proton detectors and of the forward tracking stations for some physics processes are described.

Proton-proton elastic scattering has been measured by the TOTEM experiment at the CERN Large Hadron Collider at $\sqrt{s} = 7 $ TeV in special runs with the Roman Pot detectors placed as close to the outgoing beam as seven times the transverse beam size. The differential cross-section measurements are reported in the |t|-range of 0.36 to 2.5 GeV^2. Extending the range of data to low t values from 0.02 to 0.33 GeV^2,and utilizing the luminosity measurements of CMS, the total proton-proton cross section at sqrt(s) = 7 TeV is measured to be (98.3 +- 0.2(stat) +- 2.8(syst)) mb.

The Muon g ‐ 2 collaboration has measured the anomalous magnetic g value, a = (g ‐ 2)/2, of the positive muon with an unprecedented uncertainty of 0.7 parts per million. The result aμ+(expt) = 11659204(7)(5) × 10−10, based on data collected in the year 2000 at Brookhaven National Laboratory, is in good agreement with the preceeding data on aμ+ and aμ−. The measurement tests standard model theory, which at the level of the current experimental uncertainty involves quantum electrodynamics, quantum chromodynamics, and electroweak interaction in a significant way.

The ATLAS experiment at the Large Hadron Collider (LHC) at CERN is currently being assembled to be ready to take first data in 2008. Its muon spectrometer is designed to achieve a momentum resolution of better than 10% up to transverse muon momenta of 1 TeV. The spectrometer consists of one barrel and two endcap superconducting air-core toroid magnets instrumented with three layers of precision drift chambers as tracking detectors and a dedicated trigger system. Detailed studies have been performed with a new approach of the autocalibration, a method to determine the space-to-drift- time relation of the ATLAS MDT chambers, and are presented.

Cylindrical pressurized drift tubes with different anode wire diameters were operated in a 170 GeV muon test beam. The dependences of spatial resolution, efficiency and streamer probability on the anode wire diameter were measured. The resolution measurements are compared with a simulation.

The muon (g – 2) experiment E821 is currently in progress at Brookhaven National Laboratory. Four data-taking runs for positive muons and one run for negative muons were successfully accomplished in 1997–2000 and 2001, respectively. Results of the 1997–2000 runs have been published, thus completing our experiment for µ + . Data analysis for the 2001 run for µ – is currently in progress. To provide measurement of a µ – = ½(g – 2) µ – at the same level of accuracy as for a µ + = ½(g – 2) µ +, we would need one more data-taking run. PACS Nos.: 31.15Pf, 31.30Jv, 32.10Hq

The TOTEM experiment with its detectors in the forward region of CMS and the Roman Pots along the beam line will determine the total pp cross-section via the optical theorem by measuring both the elastic cross-section and the total inelastic rate. TOTEM will have dedicated runs with special high-beta* beam optics and a reduced number of proton bunches resulting in a low effective luminosity between 1.6 x 10^{28} cm^{-2} s^{-1} and 2.4 x 10^{29} cm^{-2} s^{-1}. In these special conditions also an absolute luminosity measurement will be made, allowing the calibration of the CMS luminosity monitors needed at higher luminosities. The acceptance of more than 90 % of all leading protons in the Roman Pot system, together with CMS's central and TOTEM's forward detectors extending to a maximum rapidity of 6.5, makes the combined CMS+TOTEM experiment a unique instrument for exploring diffractive processes. Scenarios for running at higher luminosities necessary for hard diffractive phenomena with low cross-sections are under study.

The TOTEM experiment [1,2] at the LHC is dedicated to the measurement of elastic and diffractive scattering, total cross-section and forward particle production.This contribution summarises the physics results and points to the respective publications.

With the installation of the T1 telescope and the Roman Pot stations at 147 m from IP5, the detector apparatus of the TOTEM experiment has been completed during the technical stop in winter 2010/2011. After the commissioning of the dedicated beam optics with beta* = 90 m, a first measurement of the total pp cross-section sigma_tot and -- simultaneously -- the luminosity L will be possible in the upcoming running season 2011. The precision envisaged is 3 % and 4 % for sigma_tot and L, respectively. An ultimate beam optics configuration with beta* ~ 1 km will later reduce the uncertainty to the 1 % level.

The first physics results from the TOTEM experiment are here reported, concerning the measurements of the total, differential elastic, elastic and inelastic pp cross-section at the LHC energy of $\sqrt{s}$ = 7 TeV, obtained using the luminosity measurement from CMS. A preliminary measurement of the forward charged particle $\eta$ distribution is also shown.

Since the LHC running season 2010, the TOTEM Roman Pots (RPs) are fully operational and serve for collecting elastic and diffractive proton-proton scattering data. Like for other moveable devices approaching the high intensity LHC beams, a reliable and precise control of the RP position is critical to machine protection. After a review of the RP movement control and position interlock system, the crucial task of alignment will be discussed.

This paper describes the movement control system for detector positioning based on the Roman Pot design used by the ATLAS-ALFA and TOTEM experiments at the LHC. A key system requirement is that LHC machine protection rules are obeyed: the position is surveyed every 20ms with an accuracy of 15Πm. If the detectors move too close to the beam (outside limits set by LHC Operators) the LHC interlock system is triggered to dump the beam. LHC Operators in the CERN Control Centre (CCC) drive the system via an HMI provided by a custom built Java application which uses Common Middleware (CMW) to interact with lower level components. Lowlevel motorization control is executed using National Instruments PXI devices. The DIM protocol provides the software interface to the PXI layer. A FESA gateway server provides a communication bridge between CMW and DIM. A cut down laboratory version of the system was built to provide a platform for verifying the integrity of the full chain, with respect to user and machine protection requirements, and validating new functionality before deploying to the LHC. The paper contains a detailed system description, test bench results and foreseen system improvements.

The first physics results from the TOTEM experiment are here reported, concerning the measurements of the total, differential elastic, elastic and inelastic pp cross-section at the LHC energy of $\sqrt{s}$ = 7 TeV, obtained using the luminosity measurement from CMS. A preliminary measurement of the forward charged particle $η$ distribution is also shown.

The longitudinal and transverse beam coupling impedance of the first final TOTEM Roman Pot unit has been measured in the laboratory with the wire method. For the evaluation of transverse impedance the wire position has been kept constant, and the insertions of the RP were moved asymmetrically. With the original configuration of the RP, resonances with fairly high Q values were observed. In order to mitigate this problem, RF-absorbing ferrite plates were mounted in appropriate locations. As a result, all resonances were sufficiently damped to meet the stringent LHC beam coupling impedance requirements.