Valentina Dutta

Abstract As part of its HL-LHC upgrade program, the CMS collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with ∼30,000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1 cm 2 , and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration.

Direction measurement of weakly interacting massive particles in time-projection chambers can provide definite evidence of their existence and help to determine their properties. This article demonstrates several concepts for charge amplification in time-projection chambers that can be used in direction-sensitive dark matter search experiments. We demonstrate reconstruction of the 'head-tail' effect for nuclear recoils above 100keV, and discuss the detector performance in the context of dark matter detection and scaling to large detector volumes.

This is the third out of five chapters of the final report [1] of the Workshop on Physics at HL-LHC, and perspectives on HE-LHC [2]. It is devoted to the study of the potential, in the search for Beyond the Standard Model (BSM) physics, of the High Luminosity (HL) phase of the LHC, defined as $3~\mathrm{ab}^{-1}$ of data taken at a centre-of-mass energy of $14~\mathrm{TeV}$, and of a possible future upgrade, the High Energy (HE) LHC, defined as $15~\mathrm{ab}^{-1}$ of data at a centre-of-mass energy of $27~\mathrm{TeV}$. We consider a large variety of new physics models, both in a simplified model fashion and in a more model-dependent one. A long list of contributions from the theory and experimental (ATLAS, CMS, LHCb) communities have been collected and merged together to give a complete, wide, and consistent view of future prospects for BSM physics at the considered colliders. On top of the usual standard candles, such as supersymmetric simplified models and resonances, considered for the evaluation of future collider potentials, this report contains results on dark matter and dark sectors, long lived particles, leptoquarks, sterile neutrinos, axion-like particles, heavy scalars, vector-like quarks, and more. Particular attention is placed, especially in the study of the HL-LHC prospects, to the detector upgrades, the assessment of the future systematic uncertainties, and new experimental techniques. The general conclusion is that the HL-LHC, on top of allowing to extend the present LHC mass and coupling reach by $20-50\%$ on most new physics scenarios, will also be able to constrain, and potentially discover, new physics that is presently unconstrained. Moreover, compared to the HL-LHC, the reach in most observables will generally more than double at the HE-LHC, which may represent a good candidate future facility for a final test of TeV-scale new physics.

The production of four top quarks is a rare process in the Standard Model that provides unique opportunities and sensitivity to Standard Model observables including potential enhancement from many popular new physics extensions. This article summarises the latest experimental measurements of the four-top quark production cross section at the LHC. An overview of the interpretations of the experimental results in terms of the top quark Yukawa coupling and limits on physics beyond the Standard Model is also given as well as prospects for future measurements and opportunities offered by this challenging final state.

Fixed-target experiments using primary electron beams can be powerful discovery tools for light dark matter in the sub-GeV mass range. The Light Dark Matter eXperiment (LDMX) is designed to measure missing momentum in high-rate electron fixed-target reactions with beam energies of 4 GeV to 16 GeV. A prerequisite for achieving several important sensitivity milestones is the capability to efficiently reject backgrounds associated with few-GeV bremsstrahlung, by twelve orders of magnitude, while maintaining high efficiency for signal. The primary challenge arises from events with photo-nuclear reactions faking the missing-momentum property of a dark matter signal. We present a methodology developed for the LDMX detector concept that is capable of the required rejection. By employing a detailed Geant4-based model of the detector response, we demonstrate that the sampling calorimetry proposed for LDMX can achieve better than 10−13 rejection of few-GeV photons. This suggests that the luminosity-limited sensitivity of LDMX can be realized at 4 GeV and higher beam energies.

Abstract The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC) [1]. Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endcap calorimeters with a high granularity sampling calorimeter equipped with silicon sensors, designed to manage the high collision rates [2]. As part of the development of this calorimeter, a series of beam tests have been conducted with different sampling configurations using prototype segmented silicon detectors. In the most recent of these tests, conducted in late 2018 at the CERN SPS, the performance of a prototype calorimeter equipped with ≈12,000 channels of silicon sensors was studied with beams of high-energy electrons, pions and muons. This paper describes the custom-built scalable data acquisition system that was built with readily available FPGA mezzanines and low-cost Raspberry Pi computers.

Particle physics experiments rely extensively on computing and data services, making e-infrastructure an integral part of the research collaboration. Constructing and operating distributed computing can however be challenging for a smaller-scale collaboration. The Light Dark Matter eXperiment (LDMX) is a planned small-scale accelerator-based experiment to search for dark matter in the sub-GeV mass region. Finalizing the design of the detector relies on Monte-Carlo simulation of expected physics processes. A distributed computing pilot project was proposed to better utilize available resources at the collaborating institutes, and to improve scalability and reproducibility. This paper outlines the chosen lightweight distributed solution, presenting requirements, the component integration steps, and the experiences using a pilot system for tests with large-scale simulations. The system leverages existing technologies wherever possible, minimizing the need for software development, and deploys only non-intrusive components at the participating sites. The pilot proved that integrating existing components can dramatically reduce the effort needed to build and operate a distributed e-infrastructure, making it attainable even for smaller research collaborations.

Directional detection can provide unambiguous observation of Dark Matter interactions even in presence of insidious backgrounds. The DM-TPC collaboration is developing a detector with the goal of measuring the direction and sense of nuclear recoils produced in Dark Matter interactions. The detector consists of a Time Projection Chamber with optical readout filled with CF$_4$ gas at low pressure. A collision between a WIMP and a gas molecule results in a nuclear recoil of 1-2 mm. The measurement of the energy loss along the recoil allows us to determine the sense and the direction of the recoil. Results from a prototype detector operated in a low-energy neutron beam clearly demonstrate the suitability of this approach to measure directionality. A cubic meter prototype, which is now being designed, will allow us to set competitive limits on spin-dependent Dark Matter interactions using a directional detector.

A bstract The Light Dark Matter eXperiment (LDMX) is an electron-beam fixed-target experiment designed to achieve comprehensive model independent sensitivity to dark matter particles in the sub-GeV mass region. An upgrade to the LCLS-II accelerator will increase the beam energy available to LDMX from 4 to 8 GeV. Using detailed GEANT4-based simulations, we investigate the effect of the increased beam energy on the capabilities to separate signal and background, and demonstrate that the veto methodology developed for 4 GeV successfully rejects photon-induced backgrounds for at least 2 × 10 14 electrons on target at 8 GeV.

The constituents of dark matter are still unknown, and the viable possibilities span a vast range of masses. The physics community has established searching for sub-GeV dark matter as a high priority and identified accelerator-based experiments as an essential facet of this search strategy. A key goal of the accelerator-based dark matter program is testing the broad idea of thermally produced sub-GeV dark matter through experiments designed to directly produce dark matter particles. The most sensitive way to search for the production of light dark matter is to use a primary electron beam to produce it in fixed-target collisions. The Light Dark Matter eXperiment (LDMX) is an electron-beam fixed-target missing-momentum experiment that realizes this approach and provides unique sensitivity to light dark matter in the sub-GeV range. This contribution provides an overview of the theoretical motivation, the main experimental challenges, how LDMX addresses these challenges, and projected sensitivities. We further describe the capabilities of LDMX to explore other interesting new and standard physics, such as visibly-decaying axion and vector mediators or rare meson decays, and to provide timely electronuclear scattering measurements that will inform the modeling of neutrino-nucleus scattering for DUNE.

The vast majority of the CMS Computing capacity, which is organized in a tiered hierarchy, is located away from CERN.The 7 Tier-1 sites archive the LHC proton-proton collision data that is initially processed at CERN.These sites provide access to all recorded and simulated data for the Tier-2 sites, via wide-area network (WAN) transfers.All central data processing workflows are executed at the Tier-1 level, which contain re-reconstruction and skimming workflows of collision data as well as reprocessing of simulated data to adapt to changing detector conditions.This paper describes the operation of the CMS processing infrastructure at the Tier-1 level.The Tier-1 workflows are described in detail.The operational optimization of resource usage is described.In particular, the variation of different workflows during the data taking period of 2010, their efficiencies and latencies as well as their impact on the delivery of physics results is discussed and lessons are drawn from this experience.The simulation of proton-proton collisions for the CMS experiment is primarily carried out at the second tier of the CMS computing infrastructure.Half of the Tier-2 sites of CMS are reserved for central Monte Carlo (MC) production while the other half is available for user analysis.This paper summarizes the large throughput of the MC production operation during the data taking period of 2010 and discusses the latencies and efficiencies of the various types of MC production workflows.We present the operational procedures to optimize the usage of available resources and we the operational model of CMS for including opportunistic resources, such as the larger Tier-3 sites, into the central production operation.

Directional detection can provide unambiguous observation of Dark Matter interactions even in presence of insidious backgrounds. The DM-TPC collaboration is developing a detector with the goal of measuring the direction and sense of nuclear recoils produced in Dark Matter interactions. The detector consists of a Time Projection Chamber with optical readout filled with CF$_4$ gas at low pressure. A collision between a WIMP and a gas molecule results in a nuclear recoil of 1-2 mm. The measurement of the energy loss along the recoil allows us to determine the sense and the direction of the recoil. Results from a prototype detector operated in a low-energy neutron beam clearly demonstrate the suitability of this approach to measure directionality. A full-scale module with an active volume of about one cubic meter is now being designed. This detector, which will be operated underground in 2009, will allow us to set competitive limits on spin-dependent Dark Matter interactions using a directional detector.

The latest results of the search for the SM scalar boson in fermionic decay channels at the CMS experiment are presented. The dataset used corresponds to an integrated luminosity of 5 fb-1 of pp collision data collected at sqrt(s) = 7 TeV and up to 19.4 fb-1 collected at sqrt(s) = 8 TeV. The analyses described include the searches for the SM scalar boson decaying to tau pairs and to a pair of b-quarks. The compatibility of the results with the observation of a new boson at a mass near 125 GeV will be discussed. Results from the search for MSSM neutral Higgs bosons decaying to fermions will also be briefly summarized.

The production of four top quarks is a rare process in the Standard Model that provides unique opportunities and sensitivity to Standard Model observables including potential enhancement from many popular new physics extensions. This article summarises the latest experimental measurements of the four-top quark production cross section at the LHC. An overview of the interpretations of the experimental results in terms of the top quark Yukawa coupling and limits on physics beyond the Standard Model is also given as well as prospects for future measurements and opportunities offered by this challenging final state.

As part of its HL-LHC upgrade program, the CMS Collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1~$cm^2$, and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration.

Particle physics experiments rely extensively on computing and data services, making e-infrastructure an integral part of the research collaboration. Constructing and operating distributed computing can however be challenging for a smaller-scale collaboration. The Light Dark Matter eXperiment (LDMX) is a planned small-scale accelerator-based experiment to search for dark matter in the sub-GeV mass region. Finalizing the design of the detector relies on Monte-Carlo simulation of expected physics processes. A distributed computing pilot project was proposed to better utilize available resources at the collaborating institutes, and to improve scalability and reproducibility. This paper outlines the chosen lightweight distributed solution, presenting requirements, the component integration steps, and the experiences using a pilot system for tests with large-scale simulations. The system leverages existing technologies wherever possible, minimizing the need for software development, and deploys only non-intrusive components at the participating sites. The pilot proved that integrating existing components can dramatically reduce the effort needed to build and operate a distributed e-infrastructure, making it attainable even for smaller research collaborations.