Laurent Forthomme

Dijet production in PbPb collisions at a nucleon-nucleon center-of-mass energy of 2.76 TeV is studied with the CMS detector at the LHC. A data sample corresponding to an integrated luminosity of 150 inverse microbarns is analyzed. Jets are reconstructed using combined information from tracking and calorimetry. The dijet momentum balance and angular correlations are studied as a function of collision centrality and leading jet transverse momentum. For the most peripheral PbPb collisions, good agreement of the dijet momentum balance distributions with pp data and reference calculations at the same collision energy is found, while more central collisions show a strong imbalance of leading and subleading jet transverse momenta attributed to the jet-quenching effect. The dijet momentum imbalance in central collisions is found to persist for leading jet transverse momenta up to the highest values studied.

Measurements of inclusive jet and dijet production cross sections are presented. Data from LHC proton-proton collisions at sqrt(s) = 7 TeV, corresponding to 5.0 inverse femtobarns of integrated luminosity, have been collected with the CMS detector. Jets are reconstructed up to rapidity 2.5, transverse momentum 2 TeV, and dijet invariant mass 5 TeV, using the anti-kt clustering algorithm with distance parameter R = 0.7. The measured cross sections are corrected for detector effects and compared to perturbative QCD predictions at next-to-leading order, using five sets of parton distribution functions.

Measurements of the normalized rapidity (y) and transverse-momentum (qT) distributions of Drell–Yan muon and electron pairs in the Z-boson mass region (60<Mℓℓ<120 GeV) are reported. The results are obtained using a data sample of proton-proton collisions at a center-of-mass energy of 7 TeV, collected by the CMS experiment at the Large Hadron Collider (LHC), corresponding to an integrated luminosity of 36 pb−1. The distributions are measured over the ranges |y|<3.5 and qT<600 GeV and compared with quantum chromodynamics (QCD) calculations using recent parton distribution functions to model the momenta of the quarks and gluons in the protons. Overall agreement is observed between the models and data for the rapidity distribution, while no single model describes the Z transverse-momentum distribution over the full range.1 MoreReceived 23 October 2011DOI:https://doi.org/10.1103/PhysRevD.85.032002This article is available under the terms of the Creative Commons Attribution 3.0 License. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI.© 2012 CERN, for the CMS Collaboration

The W+W- and ZZ production cross sections are measured in proton-proton collisions at sqrt(s) = 8 TeV with the CMS experiment at the LHC in data samples corresponding to an integrated luminosity of up to 5.3 inverse femtobarns. The measurements are performed in the leptonic decay modes W+W- to l' nu l'' nu and ZZ to 2l 2l', where l = e, mu and l'(l'') = e, mu, tau. The measured cross sections sigma(pp to W+W-) = 69.9 +/- 2.8 (stat.) +/- 5.6 (syst.) +/- 3.1 (lumi.) pb and sigma(pp to ZZ) = 8.4 +/- 1.0 (stat.) +/- 0.7 (syst.) +/- 0.4 (lumi.) pb, for both Z bosons produced in the mass region 60 < m[Z] < 120 GeV, are consistent with standard model predictions. These are the first measurements of the diboson production cross sections at sqrt(s) = 8 TeV.

A measurement of the single-top-quark t-channel production cross section in pp collisions at sqrt(s) = 7 TeV with the CMS detector at the LHC is presented. Two different and complementary approaches have been followed. The first approach exploits the distributions of the pseudorapidity of the recoil jet and reconstructed top-quark mass using background estimates determined from control samples in data. The second approach is based on multivariate analysis techniques that probe the compatibility of the candidate events with the signal. Data have been collected for the muon and electron final states, corresponding to integrated luminosities of 1.17 and 1.56 inverse femtobarns, respectively. The single-top-quark production cross section in the t-channel is measured to be 67.2 +/- 6.1 pb, in agreement with the approximate next-to-next-to-leading-order standard model prediction. Using the standard model electroweak couplings, the CKM matrix element abs(V[tb]]) is measured to be 1.020 +/- 0.046 (meas.) +/- 0.017 (theor.).

The polarizations of the Υ(1S), Υ(2S), and Υ(3S) mesons are measured in proton-proton collisions at sqrt[s] = 7 TeV, using a data sample of Υ(nS) → μ +μ- decays collected by the CMS experiment, corresponding to an integrated luminosity of 4.9 fb(-1). The dimuon decay angular distributions are analyzed in three different polarization frames. The polarization parameters λ[symbol see text], λ(φ), and λ([symbol see text]φ), as well as the frame-invariant quantity λ, are presented as a function of the Υ(nS) transverse momentum between 10 and 50 GeV, in the rapidity ranges |y|<0.6 and 0.6<|y|<1.2. No evidence of large transverse or longitudinal polarizations is seen in the explored kinematic region.

The results of searches for supersymmetry by the CMS experiment are interpreted in the framework of simplified models. The results are based on data corresponding to an integrated luminosity of 4.73 to 4.98 fb−1. The data were collected at the LHC in proton–proton collisions at a center-of-mass energy of 7 TeV. This paper describes the method of interpretation and provides upper limits on the product of the production cross section and branching fraction as a function of new particle masses for a number of simplified models. These limits and the corresponding experimental acceptance calculations can be used to constrain other theoretical models and to compare different supersymmetry-inspired analyses.Received 10 January 2013DOI:https://doi.org/10.1103/PhysRevD.88.052017This article is available under the terms of the Creative Commons Attribution 3.0 License. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI.© 2013 CERN, for the CMS Collaboration

Results are presented from a search for heavy, right-handed muon neutrinos, N[mu], and right-handed W[R] bosons, which arise in the left-right symmetric extensions of the standard model. The analysis is based on a 5.0 inverse femtobarn sample of proton-proton collisions at a center-of-mass energy of 7 TeV, collected by the CMS detector at the Large Hadron Collider. No evidence is observed for an excess of events over the standard model expectation. For models with exact left-right symmetry, heavy right-handed neutrinos are excluded at 95% confidence level for a range of neutrino masses below the W[R] mass, dependent on the value of M(W[R]). The excluded region in the two-dimensional (M(W[R]), M(N[mu])) mass plane extends to M(W[R]) = 2.5 TeV.

The results of a search for the pair production of a fourth-generation up-type quark (t′) in proton–proton collisions at s=7TeV are presented, using data corresponding to an integrated luminosity of about 5.0 fb−1 collected by the Compact Muon Solenoid experiment at the LHC. The t′ quark is assumed to decay exclusively to a W boson and a b quark. Events with a single isolated electron or muon, missing transverse momentum, and at least four hadronic jets, of which at least one must be identified as a b jet, are selected. No significant excess of events over standard model expectations is observed. Upper limits for the t′t¯′ production cross section at 95% confidence level are set as a function of t′ mass, and t′-quark production for masses below 570 GeV is excluded. The search is equally sensitive to nonchiral heavy quarks decaying to Wb. In this case, the results can be interpreted as upper limits on the production cross section times the branching fraction to Wb.

Results are presented from a search for long-lived neutralinos decaying into a photon and an invisible particle, a signature associated with gauge-mediated supersymmetry breaking in supersymmetric models. The analysis is based on a 4.9fb−1 sample of proton–proton collisions at s=7TeV, collected with the CMS detector at the LHC. The missing transverse energy and the time of arrival of the photon at the electromagnetic calorimeter are used to search for an excess of events over the expected background. No significant excess is observed, and lower limits at the 95% confidence level are obtained on the mass of the lightest neutralino, m>220GeV (for cτ<500mm), as well as on the proper decay length of the lightest neutralino, cτ>6000mm (for m<150GeV).

We present a formalism which uses fluxes of equivalent photons including transverse momenta of the intermediate photons. The formalism reminds the familiar k t -factorization approach used, e.g., to study the two-gluon production of $$ c\overline{c} $$ or $$ b\overline{b} $$ pairs. The results of the new method are compared with those obtained using the code lpair, and a good agreement is obtained. The inclusion of the photon transverse momenta is necessary in studies of correlation observables. We present distributions for the dimuon invariant mass, transverse momentum of the muon pair and relative azimuthal angle between muons separately for elastic-elastic, elastic-inelastic, inelastic-elastic and inelastic-inelastic mechanisms. For typical experimental cuts all mechanisms give similar contributions. The results are shown for different sets of cuts relevant for the LHC experiments. The cross sections in different regions of phase space depend on F 2 structure function in different regions of x and Q 2. A comment on F 2 is made.

Results are reported of a search for a deviation in the jet production cross section from the prediction of perturbative quantum chromodynamics at next-to-leading order. The search is conducted using a 7 TeV proton-proton data sample corresponding to an integrated luminosity of $5.0\text{ }\text{ }{\mathrm{fb}}^{\ensuremath{-}1}$, collected with the Compact Muon Solenoid detector at the Large Hadron Collider. A deviation could arise from interactions characterized by a mass scale $\ensuremath{\Lambda}$ too high to be probed directly at the LHC. Such phenomena can be modeled as contact interactions. No evidence of a deviation is found. Using the ${\mathrm{CL}}_{\mathrm{s}}$ criterion, lower limits are set on $\ensuremath{\Lambda}$ of 9.9 TeV and 14.3 TeV at 95% confidence level for models with destructive and constructive interference, respectively. Limits obtained with a Bayesian method are also reported.

Ultra Fast Silicon Detectors (UFSD) are sensors optimized for timing measurements employing a thin multiplication layer to increase the output signal. A multipurpose read-out board hosting a low-cost, low-power fast amplifier was designed at the University of Kansas and tested at the European Organization for Nuclear Research (CERN) using a 180 GeV pion beam. The amplifier has been designed to read out a wide range of detectors and it was optimized in this test for the UFSD output signal. In this paper we report the results of the experimental tests using 50 μm thick UFSD with a sensitive area of 1.4mm2. A timing precision below 30 ps wasachieved.

We calculate the cross section for pp→W+W− in the recently developed kT-factorisation approach, including transverse momenta of the virtual photons. We focus on processes with single and double proton dissociation. First we discuss the gap survival on the parton level as due to the emission of extra jet. Both the role of valence and sea contributions is discussed. The hadronisation of proton remnants is performed with PYTHIA 8 string fragmentation model, assuming a simple quark–diquark model for proton. Highly excited remnant systems hadronise producing particles that can be vetoed in the calorimeter. We calculate associated effective gap survival factors. The gap survival factors depend on the process, mass of the remnant system and collision energy. The rapidity gap survival factor due to remnant fragmentation for double dissociative (DD) collisions (SR,DD) is smaller than that for single dissociative (SD) process (SR,SD). We observe the approximate factorisation SR,DD≈(SR,SD)2, however it is expected that this property will be violated by soft rescattering effects not accounted for in this letter.

Abstract The TOTEM collaboration at the CERN LHC has measured the differential cross-section of elastic proton–proton scattering at $$\sqrt{s} = 8\,\mathrm{TeV}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow> <mml:msqrt> <mml:mi>s</mml:mi> </mml:msqrt> <mml:mo>=</mml:mo> <mml:mn>8</mml:mn> <mml:mspace /> <mml:mi>TeV</mml:mi> </mml:mrow> </mml:math> in the squared four-momentum transfer range $$0.2\,\mathrm{GeV^{2}}&lt; |t| &lt; 1.9\,\mathrm{GeV^{2}}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow> <mml:mn>0.2</mml:mn> <mml:mspace /> <mml:msup> <mml:mi>GeV</mml:mi> <mml:mn>2</mml:mn> </mml:msup> <mml:mo>&lt;</mml:mo> <mml:mrow> <mml:mo>|</mml:mo> <mml:mi>t</mml:mi> <mml:mo>|</mml:mo> </mml:mrow> <mml:mo>&lt;</mml:mo> <mml:mn>1.9</mml:mn> <mml:mspace /> <mml:msup> <mml:mi>GeV</mml:mi> <mml:mn>2</mml:mn> </mml:msup> </mml:mrow> </mml:math> . This interval includes the structure with a diffractive minimum (“dip”) and a secondary maximum (“bump”) that has also been observed at all other LHC energies, where measurements were made. A detailed characterisation of this structure for $$\sqrt{s} = 8\,\mathrm{TeV}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow> <mml:msqrt> <mml:mi>s</mml:mi> </mml:msqrt> <mml:mo>=</mml:mo> <mml:mn>8</mml:mn> <mml:mspace /> <mml:mi>TeV</mml:mi> </mml:mrow> </mml:math> yields the positions, $$|t|_{\mathrm{dip}} = (0.521 \pm 0.007)\,\mathrm{GeV^2}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow> <mml:msub> <mml:mrow> <mml:mo>|</mml:mo> <mml:mi>t</mml:mi> <mml:mo>|</mml:mo> </mml:mrow> <mml:mi>dip</mml:mi> </mml:msub> <mml:mo>=</mml:mo> <mml:mrow> <mml:mo>(</mml:mo> <mml:mn>0.521</mml:mn> <mml:mo>±</mml:mo> <mml:mn>0.007</mml:mn> <mml:mo>)</mml:mo> </mml:mrow> <mml:mspace /> <mml:msup> <mml:mi>GeV</mml:mi> <mml:mn>2</mml:mn> </mml:msup> </mml:mrow> </mml:math> and $$|t|_{\mathrm{bump}} = (0.695 \pm 0.026)\,\mathrm{GeV^2}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow> <mml:msub> <mml:mrow> <mml:mo>|</mml:mo> <mml:mi>t</mml:mi> <mml:mo>|</mml:mo> </mml:mrow> <mml:mi>bump</mml:mi> </mml:msub> <mml:mo>=</mml:mo> <mml:mrow> <mml:mo>(</mml:mo> <mml:mn>0.695</mml:mn> <mml:mo>±</mml:mo> <mml:mn>0.026</mml:mn> <mml:mo>)</mml:mo> </mml:mrow> <mml:mspace /> <mml:msup> <mml:mi>GeV</mml:mi> <mml:mn>2</mml:mn> </mml:msup> </mml:mrow> </mml:math> , as well as the cross-section values, $$\left. {\mathrm{d}\sigma /\mathrm{d}t}\right| _{\mathrm{dip}} = (15.1 \pm 2.5)\,\mathrm{{\mu b/GeV^2}}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow> <mml:msub> <mml:mfenced> <mml:mrow> <mml:mi>d</mml:mi> <mml:mi>σ</mml:mi> <mml:mo>/</mml:mo> <mml:mi>d</mml:mi> <mml:mi>t</mml:mi> </mml:mrow> </mml:mfenced> <mml:mi>dip</mml:mi> </mml:msub> <mml:mo>=</mml:mo> <mml:mrow> <mml:mo>(</mml:mo> <mml:mn>15.1</mml:mn> <mml:mo>±</mml:mo> <mml:mn>2.5</mml:mn> <mml:mo>)</mml:mo> </mml:mrow> <mml:mspace /> <mml:mrow> <mml:mi>μ</mml:mi> <mml:mi>b</mml:mi> <mml:mo>/</mml:mo> <mml:msup> <mml:mi>GeV</mml:mi> <mml:mn>2</mml:mn> </mml:msup> </mml:mrow> </mml:mrow> </mml:math> and $$\left. {\mathrm{d}\sigma /\mathrm{d}t}\right| _{\mathrm{bump}} = (29.7 \pm 1.8)\,\mathrm{{\mu b/GeV^2}}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow> <mml:msub> <mml:mfenced> <mml:mrow> <mml:mi>d</mml:mi> <mml:mi>σ</mml:mi> <mml:mo>/</mml:mo> <mml:mi>d</mml:mi> <mml:mi>t</mml:mi> </mml:mrow> </mml:mfenced> <mml:mi>bump</mml:mi> </mml:msub> <mml:mo>=</mml:mo> <mml:mrow> <mml:mo>(</mml:mo> <mml:mn>29.7</mml:mn> <mml:mo>±</mml:mo> <mml:mn>1.8</mml:mn> <mml:mo>)</mml:mo> </mml:mrow> <mml:mspace /> <mml:mrow> <mml:mi>μ</mml:mi> <mml:mi>b</mml:mi> <mml:mo>/</mml:mo> <mml:msup> <mml:mi>GeV</mml:mi> <mml:mn>2</mml:mn> </mml:msup> </mml:mrow> </mml:mrow> </mml:math> , for the dip and the bump, respectively.

In this paper, a search for supersymmetry (SUSY) is presented in events with two opposite-sign isolated leptons in the final state, accompanied by hadronic jets and missing transverse energy. An artificial neural network is employed to discriminate possible SUSY signals from a standard model background. The analysis uses a data sample collected with the CMS detector during the 2011 LHC run, corresponding to an integrated luminosity of $4.98\text{ }\text{ }{\mathrm{fb}}^{\ensuremath{-}1}$ of proton-proton collisions at the center-of-mass energy of 7 TeV. Compared to other CMS analyses, this one uses relaxed criteria on missing transverse energy (${\mathrm{E\ensuremath{\llap{\not\;}}}}_{\mathrm{T}}&gt;40\text{ }\text{ }\mathrm{GeV}$) and total hadronic transverse energy (${H}_{\mathrm{T}}&gt;120\text{ }\text{ }\mathrm{GeV}$), thus probing different regions of parameter space. Agreement is found between standard model expectation and observations, yielding limits in the context of the constrained minimal supersymmetric standard model and on a set of simplified models.

Measurements are presented by the CMS Collaboration at the Large Hadron Collider (LHC) of the higher-order harmonic coefficients that describe the azimuthal anisotropy of charged particles emitted in sqrt(s[NN]) = 2.76 TeV PbPb collisions. Expressed in terms of the Fourier components of the azimuthal distribution, the n = 3-6 harmonic coefficients are presented for charged particles as a function of their transverse momentum (0.3 < pt < 8.0 GeV), collision centrality (0-70%), and pseudorapidity (abs(eta) < 2.0). The data are analyzed using the event plane, multiparticle cumulant, and Lee-Yang zeros methods, which provide different sensitivities to initial-state fluctuations. Taken together with earlier LHC measurements of elliptic flow (n = 2), the results on higher-order harmonic coefficients develop a more complete picture of the collective motion in high-energy heavy-ion collisions and shed light on the properties of the produced medium.

The degradation of signal in silicon sensors is studied under conditions expected at the CERN High-Luminosity LHC. 200 μm thick n-type silicon sensors are irradiated with protons of different energies to fluences of up to 3 · 1015 neq/cm2. Pulsed red laser light with a wavelength of 672 nm is used to generate electron-hole pairs in the sensors. The induced signals are used to determine the charge collection efficiencies separately for electrons and holes drifting through the sensor. The effective trapping rates are extracted by comparing the results to simulation. The electric field is simulated using Synopsys device simulation assuming two effective defects. The generation and drift of charge carriers are simulated in an independent simulation based on PixelAV. The effective trapping rates are determined from the measured charge collection efficiencies and the simulated and measured time-resolved current pulses are compared. The effective trapping rates determined for both electrons and holes are about 50% smaller than those obtained using standard extrapolations of studies at low fluences and suggest an improved tracker performance over initial expectations.

A bstract We discuss the production of $$ t\overline{t} $$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mi>t</mml:mi> <mml:mover> <mml:mi>t</mml:mi> <mml:mo>¯</mml:mo> </mml:mover> </mml:math> quark-antiquark pairs in proton-proton collisions via the γγ fusion mechanism. We include topologies in which both protons stay intact or one or even both of them undergo dissociation. The calculations are performed within the k T -factorisation approach, including transverse momenta of intermediate photons. Photon fluxes associated with inelastic (dissociative) processes are calculated based on modern parameterisations of proton structure functions. We find an integrated cross section of about 2.36 fb at $$ \sqrt{s}=13 $$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:msqrt> <mml:mi>s</mml:mi> </mml:msqrt> <mml:mo>=</mml:mo> <mml:mn>13</mml:mn> </mml:math> TeV for all contributions (without requirement of rapidity gap). The cross section for the fully elastic process is the smallest. Inelastic contributions are significantly reduced when a veto on outgoing jets is imposed. We present several differential distributions in rapidity and transverse momenta of single t or $$ \overline{t} $$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mover> <mml:mi>t</mml:mi> <mml:mo>¯</mml:mo> </mml:mover> </mml:math> quarks/antiquarks as well as distributions in invariant mass of both the $$ t\overline{t} $$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mi>t</mml:mi> <mml:mover> <mml:mi>t</mml:mi> <mml:mo>¯</mml:mo> </mml:mover> </mml:math> and masses of dissociated systems. A few two-dimensional distributions are presented in addition.

Results are reported from a search for the anomalous production of highly boosted Z bosons with large transverse momentum and decaying to dimuons. Such Z bosons may be produced in the decays of new heavy particles. The search uses pp collision data at sqrt(s) = 7 TeV, corresponding to an integrated luminosity of 5.0 inverse femtobarns recorded with the CMS detector. The shape of the observed transverse-momentum distribution of Z bosons is consistent with standard model expectations. Constraints are obtained on models predicting the production of excited quarks decaying via electroweak processes. Assuming a compositeness scale that is equal to the excited quark mass as well as transition coupling strengths between Z bosons and excited quarks that are equal to standard model couplings to quarks, masses of excited quarks below 1.94 TeV are excluded at the 95% confidence level. For excited quark production via a novel contact interactions, masses below 2.22 TeV are excluded, even if the excited quarks do not couple to gluons.

We present an event generator for the simulation of central exclusive processes in hadron-hadron reactions. Among others, it implements the two-photon production of lepton pairs previously introduced in LPAIR. As a proof of principle, we show that the two approaches are numerically consistent. The kT-factorized description of this process is also handled, along with the two-photon production of a quark, or a W± gauge boson pair. This toolbox may be used as a common framework for the definition of many other processes following this approach. Additionally, photoproduction and other photon induced processes are also considered, or being implemented. Program title: CepGen CPC Library link to program files: https://doi.org/10.17632/24jg665g65.1 Developer's repository link: https://github.com/cepgen/cepgen Licensing provisions: GNU General Public License 3 Programming language: C++/Python External routines/libraries: GSL [1] for MC integration and histogramming, optional wrappers for LHAPDF [2] for the partonic proton structure functions evaluation, or ROOT [3], Delphes [4] for the output treatment. Nature of problem: The simulation of central exclusive, and in particular two-photon induced processes is becoming increasingly topical given its potential source of contamination for electroweak studies and resonance searches at LHC and future colliders. However, most of simulation tools available are only accounting for the production of photons collinear to the incoming proton beams. Legacy codes such as LPAIR, have however shown their effectiveness in predicting such processes at LHC energies. Unfortunately, they are barely maintained nor maintainable with modern computing infrastructures. Solution method: CepGen provides a modern implementation of legacy photon-induced matrix elements (γγ→ℓ+ℓ−, and W+W−, with more to be added), including standard e+e−, or pp beams (both elastic and dissociative final beam states for the latter). For the modern implementation of LPAIR, it inherits from the former fine treatment of the low-|t| region accounting for a large fraction of the cross section. It also introduces a general wrapping framework to define new photon-induced and diffractive processes, either in C++ or in Fortran. This wrapper provides the kT factorization procedure for 2→4 process computation, and a highly flexible 2→N process placeholder. A user-defined taming of the matrix element is also included to study the effect of kinematic variables-dependent survival factors observed experimentally. Additional comments including restrictions and unusual features: Depending on the complexity of the central process, memory and CPU time. Currently event generation runs only in single-threaded mode, development ongoing to support multi-threading. B. Gough et al., GNU Scientific Library Reference Manual (Network Theory Ltd., 2009), 3rd ed., ISBN 0954612078, 9780954612078. A. Buckley et al., Eur. Phys. J. C75 (2015) 132, arXiv:1412.7420. R. Brun and F. Rademakers, Nucl. Instrum. Meth. A389 (1997) 81. J. de Favereau et al., DELPHES 3, JHEP 02 (2014) 057 arXiv:1307.6346.

The first study of W boson production in pPb collisions is presented, for bosons decaying to a muon or electron, and a neutrino. The measurements are based on a data sample corresponding to an integrated luminosity of 34.6 inverse nanobarns at a nucleon-nucleon centre-of-mass energy of sqrt(s[NN]) = 5.02 TeV, collected by the CMS experiment. The W boson differential cross sections, lepton charge asymmetry, and forward-backward asymmetries are measured for leptons of transverse momentum exceeding 25 GeV, and as a function of the lepton pseudorapidity in the abs(eta[lab]) < 2.4 range. Deviations from the expectations based on currently available parton distribution functions are observed, showing the need for including W boson data in nuclear parton distribution global fits.

Spin correlations in the t-tbar quark system and the polarization of the top quark are measured using dilepton final states produced in pp collisions at the LHC at $\sqrt{s}$=7 TeV. The data correspond to an integrated luminosity of 5.0 inverse femtobarns collected with the CMS detector. The measurements are performed using events with two oppositely charged leptons (electrons or muons), a significant imbalance in transverse momentum, and two or more jets, where at least one of the jets is identified as likely originating from a b quark. The spin correlations and polarization are measured through asymmetries in angular distributions of the two selected leptons, unfolded to the parton level. All measurements are found to be in agreement with predictions of the standard model.

We present the recent measurements of exclusive processes performed in the CMS experiment at the LHC using data collected at a centre of mass energy of 7 TeV. These measurements include the double-pomeron production of photon pairs, the two-photon production of leptons pairs, and the previously undetected two-photon production of W boson pairs. While in case of the two first processes that enables to set limits on production cross-section, in the later case it provides also stringent limits on the anomalous quartic gauge couplings.

A study of dijet production in proton–proton collisions was performed at s√=7~TeV for jets with p T>35 GeV and |y|<4.7 using data collected with the CMS detector at the LHC in 2010. Events with at least one pair of jets are denoted as “inclusive”. Events with exactly one pair of jets are called “exclusive”. The ratio of the cross section of all pairwise combinations of jets to the exclusive dijet cross section as a function of the rapidity difference between jets |Δy| is measured for the first time up to |Δy|=9.2. The ratio of the cross section for the pair consisting of the most forward and the most backward jet from the inclusive sample to the exclusive dijet cross section is also presented. The predictions of the Monte Carlo event generators pythia6 and pythia8 agree with the measurements. In both ratios the herwig++ generator exhibits a more pronounced rise versus |Δy| than observed in the data. The BFKL-motivated generators cascade and hej+ariadne predict for these ratios a significantly stronger rise than observed.

A search for the rare decays B → μ μ and B → μ μ is performed in pp collisions at ps = 7TeV, with a data sample corresponding to an integrated luminosity of 5 fb collected by the CMS experiment at the LHC. In both decays, the number of events observed after all selection requirements is consistent with the expectation from background plus standard model signal predictions. The resulting upper limits on the branching fractions are B(B → μ μ-) < 7:7 × 10 and B(B → μ μ ) < 1:8 × 10 at 95% confidence level.

In this paper, a search for supersymmetry (SUSY) is presented in events with two opposite-sign isolated leptons in the final state, accompanied by hadronic jets and missing transverse energy. An artificial neural network is employed to discriminate possible SUSY signals from a standard model background. The analysis uses a data sample collected with the CMS detector during the 2011 LHC run, corresponding to an integrated luminosity of 4.98  fb-1 of proton-proton collisions at the center-of-mass energy of 7 TeV. Compared to other CMS analyses, this one uses relaxed criteria on missing transverse energy (ET>40  GeV) and total hadronic transverse energy (HT>120  GeV), thus probing different regions of parameter space. Agreement is found between standard model expectation and observations, yielding limits in the context of the constrained minimal supersymmetric standard model and on a set of simplified models

The polarizations of the Υ(1S), Υ(2S), and Υ(3S) mesons are measured in proton-proton collisions at √s=7  TeV, using a data sample of Υ(nS)→μ+μ- decays collected by the CMS experiment, corresponding to an integrated luminosity of 4.9  fb-1. The dimuon decay angular distributions are analyzed in three different polarization frames. The polarization parameters λϑ, λφ, and λϑφ, as well as the frame-invariant quantity λ˜, are presented as a function of the Υ(nS) transverse momentum between 10 and 50 GeV, in the rapidity ranges |y|<0.6 and 0.6<|y|<1.2. No evidence of large transverse or longitudinal polarizations is seen in the explored kinematic region.

We present the recent measurements of exclusive processes performed in the CMS experiment at the LHC using data collected at a centre of mass energy of 7 TeV. These measurements include the double-pomeron production of photon pairs, the two-photon production of leptons pairs, and the previously undetected two-photon production of W boson pairs. While in case of the two first processes that enables to set limits on production cross-section, in the later case it provides also stringent limits on the anomalous quartic gauge couplings.

We present an event generator emphasised for the simulation of central exclusive processes in hadron-hadron reactions. Among others, it implements the two-photon production of lepton pairs previously introduced in LPAIR. As a proof of principle, we show that the two approaches are numerically consistent. The $k_{\rm T}$-factorised description of this process is also handled, along with the two-photon production of a quark, or a $W^\pm$ gauge boson pair. This tool may be used as a common framework for the definition of many other processes following this approach. Additionally, photoproduction and other photon induced processes are also considered, or being implemented.

With more than 100 fb -1 recorded during LHC run 2 (2016)(2017)(2018), the joint CMS-TOTEM Precision Proton Spectrometer (CT-PPS) has started to deliver its first physics results.Located between 200 and 220 m on each side from the CMS detector, it aims at detecting forward scattered protons emerging intact from the interaction, as for instance in central exclusive processes (CEP).In this paper we describe in detail the search for two-photon production of a lepton pair performed with the first 10 fb -1 .This result proves the feasibility of operating near-beam detectors at the LHC under standard, high luminosity conditions.In addition, we describe the potential of PPS for future physics studies.