E. Migliore

A bstract The NA62 experiment reports the branching ratio measurement $$ \mathrm{BR}\left({K}^{+}\to {\pi}^{+}\nu \overline{\nu}\right)=\left({10.6}_{-3.4}^{+4.0}\left|{}_{\mathrm{stat}}\right.\pm {0.9}_{\mathrm{syst}}\right)\times {10}^{-11} $$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mi>BR</mml:mi> <mml:mfenced> <mml:mrow> <mml:msup> <mml:mi>K</mml:mi> <mml:mo>+</mml:mo> </mml:msup> <mml:mo>→</mml:mo> <mml:msup> <mml:mi>π</mml:mi> <mml:mo>+</mml:mo> </mml:msup> <mml:mi>ν</mml:mi> <mml:mover> <mml:mi>ν</mml:mi> <mml:mo>¯</mml:mo> </mml:mover> </mml:mrow> </mml:mfenced> <mml:mo>=</mml:mo> <mml:mfenced> <mml:mrow> <mml:msubsup> <mml:mn>10.6</mml:mn> <mml:mrow> <mml:mo>−</mml:mo> <mml:mn>3.4</mml:mn> </mml:mrow> <mml:mrow> <mml:mo>+</mml:mo> <mml:mn>4.0</mml:mn> </mml:mrow> </mml:msubsup> <mml:mfenced> <mml:msub> <mml:mrow /> <mml:mtext>stat</mml:mtext> </mml:msub> </mml:mfenced> <mml:mo>±</mml:mo> <mml:msub> <mml:mn>0.9</mml:mn> <mml:mtext>syst</mml:mtext> </mml:msub> </mml:mrow> </mml:mfenced> <mml:mo>×</mml:mo> <mml:msup> <mml:mn>10</mml:mn> <mml:mrow> <mml:mo>−</mml:mo> <mml:mn>11</mml:mn> </mml:mrow> </mml:msup> </mml:math> at 68% CL, based on the observation of 20 signal candidates with an expected background of 7.0 events from the total data sample collected at the CERN SPS during 2016–2018. This provides evidence for the very rare K + → $$ {\pi}^{+}\nu \overline{\nu} $$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:msup> <mml:mi>π</mml:mi> <mml:mo>+</mml:mo> </mml:msup> <mml:mi>ν</mml:mi> <mml:mover> <mml:mi>ν</mml:mi> <mml:mo>¯</mml:mo> </mml:mover> </mml:math> decay, observed with a significance of 3.4 σ . The experiment achieves a single event sensitivity of (0 . 839 ± 0 . 054) × 10 − 11 , corresponding to 10.0 events assuming the Standard Model branching ratio of (8 . 4 ± 1 . 0) × 10 − 11 . This measurement is also used to set limits on BR( K + → π + X ), where X is a scalar or pseudo-scalar particle. Details are given of the analysis of the 2018 data sample, which corresponds to about 80% of the total data sample.

The NA62 experiment at CERN reports searches for $K^+\to\mu^+N$ and $K^+\to\mu^+\nu X$ decays, where $N$ and $X$ are massive invisible particles, using the 2016-2018 data set. The $N$ particle is assumed to be a heavy neutral lepton, and the results are expressed as upper limits of ${\cal O}(10^{-8})$ of the neutrino mixing parameter $|U_{\mu4}|^2$ for $N$ masses in the range 200-384 MeV/$c^2$ and lifetime exceeding 50 ns. The $X$ particle is considered a scalar or vector hidden sector mediator decaying to an invisible final state, and upper limits of the decay branching fraction for $X$ masses in the range 10-370 MeV/$c^2$ are reported for the first time, ranging from ${\cal O}(10^{-5})$ to ${\cal O}(10^{-7})$. An improved upper limit of $1.0\times 10^{-6}$ is established at 90% CL on the $K^+\to\mu^+\nu\nu\bar\nu$ branching fraction.

A search for heavy neutral lepton production in K+ decays using a data sample collected with a minimum bias trigger by the NA62 experiment at CERN in 2015 is reported. Upper limits at the 10−7 to 10−6 level are established on the elements of the extended neutrino mixing matrix |Ue4|2 and |Uμ4|2 for heavy neutral lepton mass in the ranges 170–448 MeV/c2 and 250–373 MeV/c2, respectively. This improves on the previous limits from HNL production searches over the whole mass range considered for |Ue4|2, and above 300 MeV/c2 for |Uμ4|2.

The NA62 experiment at the CERN SPS reports the first search for $K^+ \rightarrow \pi^+ \nu \bar{\nu}$ using the decay-in-flight technique, based on a sample of $1.21\times10^{11}$ $K^+$ decays collected in 2016. The single event sensitivity is $3.15\times 10^{-10}$, corresponding to 0.267 Standard Model events. One signal candidate is observed while the expected background is 0.152 events. This leads to an upper limit of $14 \times 10^{-10}$ on the $K^+ \rightarrow \pi^+ \nu \bar{\nu}$ branching ratio at 95\% CL.

A search for heavy neutral lepton (N) production in K+→e+N decays using the data sample collected by the NA62 experiment at CERN in 2017–2018 is reported. Upper limits of the extended neutrino mixing matrix element |Ue4|2 are established at the level of 10−9 over most of the accessible heavy neutral lepton mass range 144–462 MeV/c2, with the assumption that the lifetime exceeds 50 ns. These limits improve significantly upon those of previous production and decay searches. The |Ue4|2 range favoured by Big Bang Nucleosynthesis is excluded up to a mass of about 340 MeV/c2.

The NA62 experiment at CERN reports a search for the lepton number violating decays K+→π−e+e+ and K+→π−μ+μ+ using a data sample collected in 2017. No signals are observed, and upper limits on the branching fractions of these decays of 2.2×10−10 and 4.2×10−11 are obtained, respectively, at 90% confidence level. These upper limits improve on previously reported measurements by factors of 3 and 2, respectively.

The NA62 experiment at the CERN SPS reports a study of a sample of $4 \times10^{9}$ tagged $\pi^0$ mesons from $K^+ \to \pi^+ \pi^0 (\gamma)$, searching for the decay of the $\pi^0$ to invisible particles. No signal is observed in excess of the expected background fluctuations. An upper limit of $4.4 \times10^{-9}$ is set on the branching ratio at 90% confidence level, improving on previous results by a factor of 60. This result can also be interpreted as a model-independent upper limit on the branching ratio for the decay $K^+ \to \pi^+ X$, where $X$ is a particle escaping detection with mass in the range 0.110-0.155 GeV$/c^2$ and rest lifetime greater than 100 ps. Model-dependent upper limits are obtained assuming $X$ to be an axion-like particle with dominant fermion couplings or a dark scalar mixing with the Standard Model Higgs boson.

A bstract A search for the K + → π + X decay, where X is a long-lived feebly interacting particle, is performed through an interpretation of the K + → $$ {\pi}^{+}\nu \overline{\nu} $$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:msup> <mml:mi>π</mml:mi> <mml:mo>+</mml:mo> </mml:msup> <mml:mi>ν</mml:mi> <mml:mover> <mml:mi>ν</mml:mi> <mml:mo>¯</mml:mo> </mml:mover> </mml:math> analysis of data collected in 2017 by the NA62 experiment at CERN. Two ranges of X masses, 0–110 MeV /c 2 and 154–260 MeV /c 2 , and lifetimes above 100 ps are considered. The limits set on the branching ratio, BR( K + → π + X ), are competitive with previously reported searches in the first mass range, and improve on current limits in the second mass range by more than an order of magnitude.

A bstract The NA62 experiment reports an investigation of the $$ {K}^{+}\to {\pi}^{+}\nu \overline{\nu} $$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:msup> <mml:mi>K</mml:mi> <mml:mo>+</mml:mo> </mml:msup> <mml:mo>→</mml:mo> <mml:msup> <mml:mi>π</mml:mi> <mml:mo>+</mml:mo> </mml:msup> <mml:mi>ν</mml:mi> <mml:mover> <mml:mi>ν</mml:mi> <mml:mo>¯</mml:mo> </mml:mover> </mml:math> mode from a sample of K + decays collected in 2017 at the CERN SPS. The experiment has achieved a single event sensitivity of (0 . 389 ± 0 . 024) × 10 − 10 , corresponding to 2.2 events assuming the Standard Model branching ratio of (8 . 4 ± 1 . 0) × 10 − 11 . Two signal candidates are observed with an expected background of 1.5 events. Combined with the result of a similar analysis conducted by NA62 on a smaller data set recorded in 2016, the collaboration now reports an upper limit of 1 . 78 × 10 − 10 for the $$ {K}^{+}\to {\pi}^{+}\nu \overline{\nu} $$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:msup> <mml:mi>K</mml:mi> <mml:mo>+</mml:mo> </mml:msup> <mml:mo>→</mml:mo> <mml:msup> <mml:mi>π</mml:mi> <mml:mo>+</mml:mo> </mml:msup> <mml:mi>ν</mml:mi> <mml:mover> <mml:mi>ν</mml:mi> <mml:mo>¯</mml:mo> </mml:mover> </mml:math> branching ratio at 90% CL. This, together with the corresponding 68% CL measurement of ( $$ {0.48}_{-0.48}^{+0.72} $$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:msubsup> <mml:mn>0.48</mml:mn> <mml:mrow> <mml:mo>−</mml:mo> <mml:mn>0.48</mml:mn> </mml:mrow> <mml:mrow> <mml:mo>+</mml:mo> <mml:mn>0.72</mml:mn> </mml:mrow> </mml:msubsup> </mml:math> ) × 10 − 10 , are currently the most precise results worldwide, and are able to constrain some New Physics models that predict large enhancements still allowed by previous measurements.

The NA62 experiment at CERN, designed to study the ultra-rare decay $K^+ \to \pi^+\nu\overline{\nu}$, has also collected data in beam-dump mode. In this configuration, dark photons may be produced by protons dumped on an absorber and reach a decay volume beginning 80 m downstream. A search for dark photons decaying in flight to $\mu^+\mu^-$ pairs is reported, based on a sample of $1.4 \times 10^{17}$ protons on dump collected in 2021. No evidence for a dark photon signal is observed. A region of the parameter space is excluded at 90% CL, improving on previous experimental limits for dark photon masses between 215 and 550 MeV$/c^2$.

A bstract The NA62 experiment at CERN, designed to study the ultra-rare decay K + → π + $$ \nu \overline{\nu} $$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mi>ν</mml:mi> <mml:mover> <mml:mi>ν</mml:mi> <mml:mo>¯</mml:mo> </mml:mover> </mml:math> , has also collected data in beam-dump mode. In this configuration, dark photons may be produced by protons dumped on an absorber and reach a decay volume beginning 80 m downstream. A search for dark photons decaying in flight to μ + μ − pairs is reported, based on a sample of 1 . 4 × 10 17 protons on dump collected in 2021. No evidence for a dark photon signal is observed. A region of the parameter space is excluded at 90% CL, improving on previous experimental limits for dark photon masses between 215 and 550 MeV /c 2 .

The Compact Muon Solenoid (CMS) is one of the experiments at the Large Hadron Collider (LHC) under construction at CERN. Its inner tracking system consist of the world largest Silicon Strip Tracker (SST). In total it implements 24,244 silicon sensors covering an area of 206m2. To construct a large system of this size and ensure its functionality for the full lifetime of 10 years under LHC condition, the CMS collaboration developed an elaborate design and a detailed quality assurance program. This paper describes the strategy and shows first results on sensor qualification.

The GigaTracKer (GTK) is the beam spectrometer of the CERN NA62 experiment. The detector features challenging design specifications, in particular a peak particle flux reaching up to 2.0 MHz/mm$^2$, a single hit time resolution smaller than 200 ps and, a material budget of 0.5% X$_0$ per tracking plane. To fulfill these specifications, novel technologies were especially employed in the domain of silicon hybrid time-stamping pixel technology and micro-channel cooling. This article describes the detector design and reports on the achieved performance.

The GigaTracKer is a hybrid silicon pixel detector designed for the fixed-target experiment NA62 at the CERN SPS aiming to measure the branching ratio of the very rare kaon decay $K^+ \rightarrow \pi^+\nu \bar{\nu}$ with 10\% precision. The detector has to provide measurements of momentum, direction and time of beam particles arriving at a rate of 750 MHz. The tracking system consists of four stations installed in vacuum ($\sim10^{-6}$ mbar), $60.8 \times 27\ \text{mm}^2$ each, with a total material budget of less than 2X$_0$. Each station is cooled with a microchannel cooling plate used for the first time in a high energy physics experiment. The beam particles are tracked in 4 dimensions by means of time-stamping pixels ($300\times300\ \mu \text{m}^{2}$) with the single hit time resolution reaching 115 ps. This performance has to be maintained despite the beam irradiation amounting to a yearly fluence of $4.5 \times 10^{14}\ 1MeV\ n_{\text{eq}}/200\ \text{days}$. The detector has been fully operational since 2016. We describe the GigaTracKer design and performance in the 2016-2022 years of NA62 data taking.

Abstract The NA62 experiment at CERN utilises a differential Cherenkov counter with achromatic ring focus (CEDAR) for tagging kaons within an unseparated monochromatic beam of charged hadrons. The CEDAR-H detector was developed to minimise the amount of material in the path of the beam by using hydrogen gas as the radiator medium. The detector was shown to satisfy the kaon tagging requirements in a test-beam before installation and commissioning at the experiment. The CEDAR-H performance was measured using NA62 data collected in 2023.

We present and discuss the generator setup for e+e−→4f processes chosen by the DELPHI collaboration. The need to combine the most recent theoretical achievements in the CC03 sector with the state of the art description of the remaining part of the 4-fermion processes has led to an original combination of different codes, with the WPHACT 2.0 4-fermion generator and the YFSWW code for the CC03 O(α) corrections as a starting point. The coverage of the 4-fermion phase space is discussed in detail, with particular attention to ensuring the compatibility of WPHACT with dedicated γγ generators.

A measurement of the Higgs boson Yukawa coupling to the top quark is presented using proton-proton collision data at $\sqrt{s} =$ 13 TeV, corresponding to an integrated luminosity of 137 fb$^{-1}$, recorded with the CMS detector. The coupling strength with respect to the standard model value, $Y_\mathrm{t}$, is determined from kinematic distributions in $\mathrm{t\bar{t}}$ final states containing ee, $μμ$, or e$μ$ pairs. Variations of the Yukawa coupling strength lead to modified distributions for $\mathrm{t\bar{t}}$ production. In particular, the distributions of the mass of the $\mathrm{t\bar{t}}$ system and the rapidity difference of the top quark and antiquark are sensitive to the value of $Y_\mathrm{t}$. The measurement yields a best fit value of $Y_\mathrm{t} =$ 1.16 $^{+0.24}_{-0.35}$, bounding $Y_\mathrm{t}$ $\lt$ 1.54 at a 95% confidence level.

In the context of the development of radiation hard silicon microstrip detectors for the CMS Tracker, we have investigated the dependence of interstrip and backplane capacitance as well as depletion and breakdown voltage on the design parameters and substrate characteristics of the devices. Measurements have been made for strip pitches between 60 and 240μm and various strip implants and metal widths, using multi-geometry devices, fabricated on wafers of either 〈111〉 or 〈100〉 crystal orientation, of resistivities between 1 and 6kΩcm and of thicknesses between 300 and 410μm. The effect of irradiation on properties of devices has been studied with 24GeV/c protons up to a fluence of 4.3×1014cm−2.

Interstrip and backplane capacitances on silicon microstrip detectors with p+ strip on n substrate of 320μm thickness were measured for pitches between 60 and 240μm and width over pitch ratios between 0.13 and 0.5. Parametrisations of capacitance w.r.t. pitch and width were compared with data. The detectors were measured before and after being irradiated to a fluence of 4×1014protons/cm2 of 24GeV/c momentum. The effect of the crystal orientation of the silicon has been found to have a relevant influence on the surface radiation damage, favouring the choice of a 〈100〉 substrate. Working at high bias (up to 500 V in CMS) might be critical for the stability of detector, for a small width over pitch ratio. The influence of having a metal strip larger than the p+ implant has been studied and found to enhance the stability.

The Small angle TIle Calorimeter (STIC) provides calorimetric coverage in the very forward region of the DELPHI experiment at the CERN LEP collider. The structure of the calorimeters, built with a so-called “shashlik” technique, gives a perfectly hermetic calorimeter and still allows for the insertion of tracking detectors within the sampling structure to measure the direction of the showering particle. A charged-particle veto system, composed of two scintillator layers, makes it possible to trigger on single photon events and provides e–γ separation. Results are presented from the extensive studies of these detectors in the CERN testbeams prior of installation and of the detector performance at LEP.

A prototype of the CMS Barrel Muon Detector incorporating all the features of the final chambers was built using the mass production assembly procedures and tools. The performance of this prototype was studied in a muon test beam at CERN and the results obtained are presented in this paper.

A search for exclusive two-photon production via photon exchange in proton-proton collisions, pp $\to$ p$γγ$p with intact protons, is presented. The data correspond to an integrated luminosity of 9.4 fb$^{-1}$ collected in 2016 using the CMS and TOTEM detectors at a center-of-mass energy of 13 TeV at the LHC. Events are selected with a diphoton invariant mass above 350 GeV and with both protons intact in the final state, to reduce backgrounds from strong interactions. The events of interest are those where the invariant mass and rapidity calculated from the momentum losses of the forward-moving protons matches the mass and rapidity of the central, two-photon system. No events are found that satisfy this condition. Interpreting this result in an effective dimension-8 extension of the standard model, the first limits are set on the two anomalous four-photon coupling parameters. If the other parameter is constrained to its standard model value, the limits at 95% CL are $\lvertζ_1\rvert$ $\lt$ 2.9 $\times$ 10$^{-13}$ GeV$^{-4}$ and $\lvertζ_2\rvert$ $\lt$ 6.0 $\times$ 10$^{-13}$ GeV$^{-4}$.

These proceedings collect the presentations given at the first three meetings of the INFN "Workshop on Monte Carlo's, Physics and Simulations at the LHC", held at the Frascati National Laboratories in 2006. The first part of these proceedings contains pedagogical introductions to several basic topics of both theoretical and experimental high pT LHC physics. The second part collects more specialised presentations.

The subsystems of the CMS silicon strip tracker were integrated and commissioned at the Tracker Integration Facility (TIF) in the period from November 2006 to July 2007. As part of the commissioning, large samples of cosmic ray data were recorded under various running conditions in the absence of a magnetic field. Cosmic rays detected by scintillation counters were used to trigger the readout of up to 15\,\% of the final silicon strip detector, and over 4.7~million events were recorded. This document describes the cosmic track reconstruction and presents results on the performance of track and hit reconstruction as from dedicated analyses.

A method to study the systematic uncertainties related to the Tracker material simulation has been developed. The method can be applied whenever the effect of a known variation of a material component has to be studied. A set of realistic material modifications to be used by physics analysis groups is proposed.

The structure of a shashlik calorimeter allows the insertion of tracking detectors within the longitudinal sampling to improve the accuracy in the determination of the direction of the showering particle and the eπ separation ability. The new forward calorimeter of the DELPHI detector has been equipped with two planes of silicon pad detectors respectively after 4 and 7.4 radiation lengths. The novelty of these silicon detectors is that to cope with the shashlik readout fibers, they had to incorporate 1.4 mm holes every cm2. The detector consists of circular strips with a radial pitch of 1.7 mm and an angular granularity of 22.5°, read out by means of the MX4 preamplifier. The preamplifier is located at 35 cm from the silicon detector and the signal is carried by Kapton cables bonded to the detector. The matching to the MX4 input pitch of 44 μm was made by a specially developed fanin hybrid.

The small angle tile Calorimeter (STIC) provides calorimetric coverage in the very forward region for the DELPHI experiment at the CERN LEP collider. A veto system composed of two scintillator layers allows one to trigger on single photon events and provides e-/spl gamma/ separation. We present here some results of extensive measurements performed on part of the calorimeter and the veto system in the CERN test beams prior to installation and report on the performance achieved during the 1994 LEP run.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>

The Gigatracker is the NA62 beam tracker. It is made of three 63.1mm×29.3mm stations of 300μm×300μm hybrid silicon pixel detectors installed in vacuum (∼10−6mbar). The beam particles, flowing at 750MHz, are traced in 4-dimensions by mean of time-stamping pixels with a design resolution of 200ps. This performance has to be maintained despite the beam irradiation amounting to a yearly fluence of 2×10141MeVneq∕cm2. The detector material minimization is paramount, as the detector faces the full beam. The station material budget is reduced to 0.5%X0 by using (HEP world first) micro-channels cooling. We will describe the detector design and performances during the NA62 runs.

A search for long-lived particles (LLPs) produced in association with a Z boson is presented. The study is performed using data from proton-proton collisions with a center-of-mass energy of 13 TeV recorded by the CMS experiment during 2016-2018, corresponding to an integrated luminosity of 117 fb$^{-1}$. The LLPs are assumed to decay to a pair of standard model quarks that are identified as displaced jets within the CMS tracker system. Triggers and selections based on Z boson decays to electron or muon pairs improve the sensitivity to light LLPs (down to 15 GeV). This search provides sensitivity to beyond the standard model scenarios which predict LLPs produced in association with a Z boson. In particular, the results are interpreted in the context of exotic decays of the Higgs boson to a pair of scalar LLPs (H $\to$ SS). The Higgs boson decay branching fraction is constrained to values less than 6% for proper decay lengths of 10-100 mm and for LLP masses between 40 and 55 GeV. In the case of low-mass ($\approx$15 GeV) scalar particles that subsequently decay to a pair of b quarks, the search is sensitive to branching fractions $\mathcal{B}$(H $\to$ SS) $\lt$ 20% for proper decay lengths of 10-50 mm. The use of associated production with a Z boson increases the sensitivity to low-mass LLPs of this analysis with respect to gluon fusion searches. In the case of 15 GeV scalar LLPs, the improvement corresponds to a factor of 2 at a proper decay length of 30 mm.

A measurement of inclusive four-jet production in proton-proton collisions at a center-of-mass energy of 13\TeV is presented. The transverse momenta of jets within $\lvert\eta\rvert \lt$ 4.7 reach down to 35, 30, 25, and 20 GeV for the first-, second-, third-, and fourth-leading jet, respectively. Differential cross sections are measured as functions of the jet transverse momentum, jet pseudorapidity, and several other observables that describe the angular correlations between the jets. The measured distributions show sensitivity to different aspects of the underlying event, parton shower, and matrix element calculations. In particular, the interplay between angular correlations caused by parton shower and double-parton scattering contributions is shown to be important. The double-parton scattering contribution is extracted by means of a template fit to the data, using distributions for single-parton scattering obtained from Monte Carlo event generators and a double-parton scattering distribution constructed from inclusive single-jet events in data. The effective double-parton scattering cross section is calculated and discussed in view of previous measurements and of its dependence on the models used to describe the single-parton scattering background.

The structure of the calorimeters built with the "Shashlik" technique allows the insertion of tracking detectors within the sampling structure, in order to improve the accuracy in the determination of the showering particle direction and to enhance the e-/spl pi/ separation ability. The new luminosity monitor of the DELPHI detector at LEP was equipped with two planes of silicon pad detectors placed at a depth of 4 and 7.4 radiation lengths. A description of the silicon detectors is given, together with the results from the exposure to a test beam.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>

The CMS experiment at the LHC will comprise a large silicon strip tracker. This article highlights some of the results obtained in the R&D studies for the optimization of its silicon sensors. Measurements of the capacitances and of the high voltage stability of the devices are presented before and after irradiation to the dose expected after the full lifetime of the tracker.

This note presents a combination of published and preliminary electroweak results from the four LEP collaborations and the SLD collaboration which were prepared for the 2004 summer conferences. Averages from Z resonance results are derived for hadronic and leptonic cross sections, the leptonic forward-backward asymmetries, the {tau} polarization asymmetries, the b{bar b} and c{bar c} partial widths and forward-backward asymmetries and the q{bar q} charge asymmetry. Above the Z resonance, averages are derived for di-fermion cross sections and forward-backward asymmetries, photon-pair, W-pair, Z-pair, single-W and single-Z cross sections, electroweak gauge boson couplings, W mass and width and W decay branching ratios. Also, an investigation of the interference of photon and Z-boson exchange is presented, and colour reconnection and Bose-Einstein correlation analyses in W-pair production are combined. The main changes with respect to the experimental results presented in summer 2003 are updates to the W branching fractions and four-fermion cross sections measured at LEP-2, and the SLD/LEP heavy-flavour results measured at the Z pole. The results are compared with precise electroweak measurements from other experiments, notably the final result on the electroweak mixing angle determined in neutrino-nucleon scattering by the NuTeV collaboration, the latest result in atomic parity violation in Caesium, and the measurement of the electroweak mixing angle in Moller scattering. The parameters of the Standard Model are evaluated, first using the combined LEP electroweak measurements, and then using the full set of high-Q{sup 2} electroweak results.

The GigaTracker is a lightweight hybrid silicon pixel detector built for the NA62 experiment at CERN, which aims at measuring the branching fraction of the ultra-rare kaon decay K + → π + ν ν at the CERN SPS.The detector tracks charged particles in a 75 GeV/c hadron beam with a flux reaching 1.3 MHz/mm 2 .It consists of three stations, 61×27 mm 2 each, which provide singlehit timing with 130 ps resolution.Each station is composed of a 200 µm thick planar silicon sensor, segmented in 300×300 µm 2 pixels, bump-bonded to 2×5 custom 100 µm thick ASIC, called TDCPix.Each TDCPix contains 40×45 asynchronous pixels, and is instrumented with 360 pairs of time-to-digital converter channels with 100 ps bin.The three stations are installed in vacuum (about 10 -6 mbar) and cooled with liquid C 6 F 14 circulating through micro-channels etched inside silicon plates a few hundred microns thick.The total material budget is less than 0.5% X 0 per station.Detector description, operational experience and performance from the NA62 experimental run in 2016, at about 30% the nominal beam intensity, are presented.

The NA62 experiment at the CERN SPS is a fixed target experiment designed to measure the branching ratio of the ultra-rare Kaon decay K+→π+νν̄. The experiment uses an high-momentum K+ decay in-flight technique to increase the rejection power of the main background: K+→π+π0. The Gigatracker is a hybrid silicon pixel detector, exposed to a 750 MHz high-energy charged hadron beam, built to give an accurate measurement of K+ momentum and direction together with an high precision measurement of the beam particle arrival time (115 ps RMS resolution per plane). It comprises three stations placed right before the K+ decay region and inserted around two achromats. The detector works in vacuum (∼10−6mbar) at about −10°C. Each station is made of a 200μm thick silicon sensor readout by 10 TDCPix, custom 100μm thick ASICs, and cooled by an innovative double circuit silicon micro-channel cooling system. All these parts are designed to minimize the total material budget which, in the final detector, amounts to less than 1.5% X0 for the three stations. In order to sustain the high rate of incoming particles, each TDCPix, operating in a self triggered mode, is equipped with four 3.2 Gb/s serializers sending data to the detector DAQ system based on a read-out card per TDCPix chip sending trigger-matched hits to 6 PC servers. I will describe the whole detector and present some of the results from data collected during the 2016 NA62 runs.

The LHC machine is planning an upgrade program, which will smoothly bring the instantaneous luminosity to about $5-7.5\times10^{34}~\mathrm{cm}^{-2}\mathrm{s}^{-1}$ in 2028, to possibly reach an integrated luminosity of 3000-4500 fb$^{-1}$ by the end of 2039. This High-Luminosity LHC scenario, HL-LHC, will require a preparation program of the LHC detectors known as Phase-2 upgrade. The current CMS Outer Tracker, already running beyond design specifications, and the recently installed CMS Phase-1 Pixel Detector will not be able to survive the HL-LHC radiation conditions. Thus, CMS will need completely new devices in order to fully exploit the high-demanding operating conditions and the delivered luminosity. The new Outer Tracker should also have trigger capabilities. To achieve such goals, the R&D activities have investigated different options for the Outer Tracker and for the pixel Inner Tracker. The developed solutions will allow including tracking information at the Level-1 trigger. The design choices for the Tracker upgrades are discussed along with some highlights on the technological choices and the R&D activities.

The CMS Silicon tracker consists of 70m2 of microstrip sensors which design will be finalized at the end of 1999 on the basis of systematic studies of device characteristics as function of the most important parameters. A fundamental constraint comes from the fact that the detector has to be operated in a very hostile radiation environment with full efficiency. We present an overview of the current results and prospects for converging on a final set of parameters for the silicon tracker sensors.

For the construction of the silicon microstrip detectors for the Tracker of the CMS experiment, two different substrate choices were investigated: A high-resistivity (6 k cm) substrate with (111) crystalorientation and a low-resistivity (2k cm) one with (100) crystalorientation. The interstrip and backplane capacitances were measured before and after the exposure to radiation in a range of strip pitches from 60 μm to 240 μm and for values of the width-over-pitch ratio between 0.1 and 0.5.

Results are presented on the radiation and magnetic tests carried out in May and July 2003 on the SASY power supply developed by CAEN for the CMS Silicon Tracker Detector. In particular, using the test equipment developed at Torino INFN laboratory Single Event Upsets both on the analogue and in the digital circuits of the power supply have been detected online. The experimental procedure is described at length and the results are discussed in the perspective of 10 years LHC running.

The new Small Angle TIIe Calorimeter (STIC) covers the forward regions in DELPHI. The main motivation for its construction was to achieve a systematic error of 0.1% on the luminosity determination. This detector consists of a “shashlik” type calorimeter, equipped with two planes of silicon pad detectors placed respectively after 4 and 7.4 radiation lengths. A veto counter, composed of two scintillator planes, covers the front of the calorimeter to allow ϱ − γ separation and to provide a neutral energy trigger. The physics motivations for this project, results from extensive testbeam measurements and the performance during the 1994 LEP run are reported here.

This paper describes the Silicon microstrip Tracker of the CMS experiment at LHC. It consists of a barrel part with 5 layers and two endcaps with 10 disks each. About 10 000 single-sided equivalent modules have to be built, each one carrying two daisy-chained silicon detectors and their front-end electronics. Back-to-back modules are used to read-out the radial coordinate. The tracker will be operated in an environment kept at a temperature of T=−10°C to minimize the Si sensors radiation damage. Heavily irradiated detectors will be safely operated due to the high-voltage capability of the sensors. Full-size mechanical prototypes have been built to check the system aspects before starting the construction.

Charge-dependent anisotropy Fourier coefficients ($v_n$) of particle azimuthal distributions are measured in pPb and PbPb collisions at $ \sqrt{\smash[b]{s_{_{\mathrm{NN}}}}} = $ 5.02 TeV with the CMS detector at the LHC. The normalized difference in the second-order anisotropy coefficients ($v_2$) between positively and negatively charged particles is found to depend linearly on the observed event charge asymmetry with comparable slopes for both pPb and PbPb collisions over a wide range of charged particle multiplicity. In PbPb, the third-order anisotropy coefficient, $v_3$, shows a similar linear dependence with the same slope as seen for $v_2$. The observed similarities between the $v_2$ slopes for pPb and PbPb, as well as the similar slopes for $v_2$ and $v_3$ in PbPb, are compatible with expectations based on local charge conservation in the decay of clusters or resonances, and constitute a challenge to the hypothesis that the observed charge asymmetry dependence of $v_2$ in heavy ion collisions arises from a chiral magnetic wave.

First alignment results of LHC experiments tracking detectors, based on the cosmic data taken during commissioning runs with the detectors in their final positions, are presented.The unprecedented complexity of these detectors, made of several thousands of silicon modules built in different technologies, is a challenge for alignment.Indeed, for an optimal performance, the position and orientation of the modules need to be determined with a precision of few micrometers.

First alignment results of LHC experiments tracking detectors, based on the cosmic data taken during commissioning runs with the detectors in their final p ositions, are presented. The unprecedented complexity of these detectors, made of several thousands of silicon modules built in different technologies, is a challenge for alignment. Inde ed, for an optimal performance, the position and orientation of the modules need to be determined with a precision of few micrometers.

The inner portion of the CMS microstrip Tracker consists of 3540 silicon detector modules; its construction has been under full responsibility of seven INFN (Istituto Nazionale di Fisica Nucleare) and University laboratories in Italy. In this note procedures and strategies, which were developed and perfected to qualify the Tracker Inner Barrel and Inner Disks modules for installation, are described. In particular the tests required to select highly reliable detector modules are illustrated and a summary of the results from the full Inner Tracker module test is presented. 1) INFN sez. di Catania and Universita di Catania, Italy 2) INFN sez. di Perugia and Universita di Perugia, Italy 3) INFN sez. di Pisa and Scuola Normale Superiore di Pisa, Italy 4) INFN sez. di Pisa and Universita di Pisa, Italy 5) INFN sez. di Pisa, Italy 6) INFN sez. di Torino and Universita di Torino, Italy 7) INFN sez. di Torino, Italy 8) INFN sez. di Firenze, Italy 9) INFN sez. di Bari and Dipartimento Interateneo di Fisica di Bari, Italy 10) INFN sez. di Bari, Italy 11) INFN sez. di Padova, Italy 12) INFN sez. di Firenze and Universita di Firenze, Italy 13) INFN sez. di Padova and Universita di Padova, Italy 14) INFN sez. di Perugia, Italy a) On leave from ISS, Bucharest, Romania b) On leave from IFIN-HH, Bucharest, Romania c) Corresponding Author

These proceedings collect the presentations given at the first three meetings of the INFN "Workshop on Monte Carlo's, Physics and Simulations at the LHC", held at the Frascati National Laboratories in 2006. The first part of these proceedings contains pedagogical introductions to several basic topics of both theoretical and experimental high pT LHC physics. The second part collects more specialised presentations.

Abstract The CMS collaboration is currently preparing the upgrade of the tracking system for the High-Luminosity LHC operations (HL-LHC). The HL-LHC is scheduled to start in 2027 and it will bring the instantaneous luminosity up to 7.5 × 10 34 cm −2 s −1 , with an average of 200 interactions per beam crossing, and an integrated luminosity up to 4000 fb −1 over a decade. To operate efficiently in these challenging conditions, the new detector has to provide tracking information to the first level trigger stage and maintain good and efficient offline tracking. In this contribution, the layout of the new detector, the main technology choices together with highlights on the current status of the main detector components will be presented.

Abstract A precise knowledge of the beam spot position is required for many physics topics at LEP2. The movement of the beam spot is studied at LEP1 using beam orbit monitors close to the interaction points and compared with measurements from tracks produced in e + e − collisions. The beam orbit monitors are found to follow the beam spot position well, particularly when corrected for movements of nearby quadrupole magnets. Data from the LEP high energy run of November 1995 are also analysed, and projections made for the prospects at LEP2.

ISEE-585 Objective: To validate the reliability of self-reported traffic information as surrogate techniques of exposure assessment using objective traffic count measures. Materials and Methods: The study has been conducted in Turin (North-Western Italy, 900,000 inhabitants), one of the 12 Italian centers participating to SIDRIA-2, a wide survey on respiratory diseases performed in 2002. Questions on traffic included a parental subjective evaluation of the daily frequency of cars/trucks passing in the street of residence (“never or seldom”, “sometimes”, “frequently”, “continuously”). Objective traffic counts have been obtained by the local company of public transportation, which measured the hourly number of vehicles in the streets with an a priori high flow of traffic. Results: The subgroup analyzed included data on urban traffic flow for 139 selected streets, corresponding to the addresses of 887 subjects in our study (out of 3249 respondents reporting complete information on address and street traffic). Among the 887 subjects, self-reported traffic frequency distribution was consistent with objective traffic data; the traffic indicators from the questionnaires were significantly associated with the median number of daily vehicles passing on an average during working hours. For the indicator of car transit: 7378, 9840, and 15276 vehicles, for a reported frequency of traffic as absent/sometimes (N=51), frequent (N=205), and continuous (N=629) respectively. For the indicator of truck transit: 8549, 10,626, 14,359, and 19,120 vehicles for a reported frequency of traffic as absent (N=68), sometimes (N=324), frequent (N=351), and continuous (N=140) respectively; the distributions were similar for subjects with and for subjects without respiratory disorders. Conclusions: Self-reported traffic information seems to be a good predictor of the daily median number of vehicles passing in the street of residence.

The LHC machine is planning an upgrade program, which will smoothly bring the instantaneous luminosity to about $5-7.5\times10^{34}~\mathrm{cm}^{-2}\mathrm{s}^{-1}$ in 2028, to possibly reach an integrated luminosity of 3000-4500 fb$^{-1}$ by the end of 2039. This High-Luminosity LHC scenario, HL-LHC, will require a preparation program of the LHC detectors known as Phase-2 upgrade. The current CMS Outer Tracker, already running beyond design specifications, and the recently installed CMS Phase-1 Pixel Detector will not be able to survive the HL-LHC radiation conditions. Thus, CMS will need completely new devices in order to fully exploit the high-demanding operating conditions and the delivered luminosity. The new Outer Tracker should also have trigger capabilities. To achieve such goals, the R&D activities have investigated different options for the Outer Tracker and for the pixel Inner Tracker. The developed solutions will allow including tracking information at the Level-1 trigger. The design choices for the Tracker upgrades are discussed along with some highlights on the technological choices and the R&D activities.