Chao Wang

Dual antiplatelet therapy with clopidogrel plus low-dose aspirin has not been studied in a broad population of patients at high risk for atherothrombotic events.We randomly assigned 15,603 patients with either clinically evident cardiovascular disease or multiple risk factors to receive clopidogrel (75 mg per day) plus low-dose aspirin (75 to 162 mg per day) or placebo plus low-dose aspirin and followed them for a median of 28 months. The primary efficacy end point was a composite of myocardial infarction, stroke, or death from cardiovascular causes.The rate of the primary efficacy end point was 6.8 percent with clopidogrel plus aspirin and 7.3 percent with placebo plus aspirin (relative risk, 0.93; 95 percent confidence interval, 0.83 to 1.05; P=0.22). The respective rate of the principal secondary efficacy end point, which included hospitalizations for ischemic events, was 16.7 percent and 17.9 percent (relative risk, 0.92; 95 percent confidence interval, 0.86 to 0.995; P=0.04), and the rate of severe bleeding was 1.7 percent and 1.3 percent (relative risk, 1.25; 95 percent confidence interval, 0.97 to 1.61 percent; P=0.09). The rate of the primary end point among patients with multiple risk factors was 6.6 percent with clopidogrel and 5.5 percent with placebo (relative risk, 1.2; 95 percent confidence interval, 0.91 to 1.59; P=0.20) and the rate of death from cardiovascular causes also was higher with clopidogrel (3.9 percent vs. 2.2 percent, P=0.01). In the subgroup with clinically evident atherothrombosis, the rate was 6.9 percent with clopidogrel and 7.9 percent with placebo (relative risk, 0.88; 95 percent confidence interval, 0.77 to 0.998; P=0.046).In this trial, there was a suggestion of benefit with clopidogrel treatment in patients with symptomatic atherothrombosis and a suggestion of harm in patients with multiple risk factors. Overall, clopidogrel plus aspirin was not significantly more effective than aspirin alone in reducing the rate of myocardial infarction, stroke, or death from cardiovascular causes. (ClinicalTrials.gov number, NCT00050817.).

A new generation of photothermal theranostic agents is developed based on PEGylated WS2 nanosheets. Bimodal in vivo CT/photoacoustic imaging reveals strong tumor contrast after either intratumoral or intravenous injection of WS2-PEG. In vivo photothermal treatment is then conducted in a mouse tumor model, achieving excellent therapeutic efficacy with complete ablation of tumors. This work promises further exploration of transition-metal dichalcogenides for biomedical applications, such as cancer imaging and therapy. As a service to our authors and readers, this journal provides supporting information supplied by the authors. Such materials are peer reviewed and may be re-organized for online delivery, but are not copy-edited or typeset. Technical support issues arising from supporting information (other than missing files) should be addressed to the authors. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.

Graphene with unique physical and chemical properties has shown various potential applications in biomedicine. In this work, a photosensitizer molecule, Chlorin e6 (Ce6), is loaded on polyethylene glycol (PEG)-functionalized graphene oxide (GO) via supramolecular π-π stacking. The obtained GO-PEG-Ce6 complex shows excellent water solubility and is able to generate cytotoxic singlet oxygen under light excitation for photodynamic therapy (PDT). Owing to the significantly enhanced intracellular trafficking of photosensitizers, our GO-PEG-Ce6 complex offers a remarkably improved cancer cell photodynamic destruction effect compared to free Ce6. More importantly, we show that the photothermal effect of graphene can be utilized to promote the delivery of Ce6 molecules by mild local heating when exposed to a near-infrared laser at a low power density, further enhancing the PDT efficacy against cancer cells. Our work highlights the promise of using graphene for potential multifunctional cancer therapies.

<h3>Background</h3> The coronavirus disease 2019 (COVID-19) is spreading rapidly, bringing pressure and challenges to nursing staff. <h3>Objective</h3> To explore the psychology of nurses caring for COVID-19 patients. <h3>Methods</h3> Using a phenomenological approach, we enrolled 20 nurses who provided care for COVID-19 patients in the First Affiliated Hospital of Henan University of Science and Technology from January 20, to February 10, 2020. The interviews were conducted face-to-face or by telephone and were analysed by Colaizzi's 7-step method. <h3>Results</h3> The psychological experience of nurses caring for COVID-19 patients can be summarized into 4 themes. First, negative emotions present in early stage consisting of fatigue, discomfort, and helplessness was caused by high-intensity work, fear and anxiety, and concern for patients and family members. Second, self-coping styles included psychological and life adjustment, altruistic acts, team support, and rational cognition. Third, we found growth under pressure, which included increased affection and gratefulness, development of professional responsibility, and self-reflection. Finally, we showed that positive emotions occurred simultaneously with negative emotions. <h3>Conclusions</h3> During an epidemic outbreak, positive and negative emotions of the front-line nurses interweaved and coexisted. In the early stage, negative emotions were dominant and positive emotions appeared gradually. Self-coping styles and psychological growth played an important role in maintaining mental health of nurses.

We report the chemical intercalation of Li⁺ into the interlayer of V₂O₅·<italic>n</italic>H₂O with enlarged layer spacing and fast Zn²⁺ diffusion, resulting in high rate capability and excellent long-term cycling performance.

The residual defects and groups in chemically reduced graphene oxide cannot only improve the impedance match characteristic and prompt energy transition from contiguous states to Fermi level, but also introduce defect polarization relaxation and groups’ electronic dipole relaxation, which are all in favor of electromagnetic wave penetration and absorption. The chemically reduced graphene oxide shows enhanced microwave absorption compared with graphite and carbon nanotubes, and can be expected to display better absorption than high quality graphene, exhibiting a promising prospect as microwave absorbing material.

Cancer recurrence after surgical resection remains a significant cause of treatment failure. Here, we have developed an in situ formed immunotherapeutic bioresponsive gel that controls both local tumour recurrence after surgery and development of distant tumours. Briefly, calcium carbonate nanoparticles pre-loaded with the anti-CD47 antibody are encapsulated in the fibrin gel and scavenge H+ in the surgical wound, allowing polarization of tumour-associated macrophages to the M1-like phenotype. The released anti-CD47 antibody blocks the 'don't eat me' signal in cancer cells, thereby increasing phagocytosis of cancer cells by macrophages. Macrophages can promote effective antigen presentation and initiate T cell mediated immune responses that control tumour growth. Our findings indicate that the immunotherapeutic fibrin gel 'awakens' the host innate and adaptive immune systems to inhibit both local tumour recurrence post surgery and potential metastatic spread.

The process of self-assembly spontaneously creates well-defined structures from various chemical building blocks. Self-assembly can include different levels of complexity: it can be as simple as the dimerization of two small building blocks driven by hydrogen bonding or as complicated as a cell membrane, a remarkable supramolecular architecture created by a bilayer of phospholipids embedded with functional proteins. The study of self-assembly in simple systems provides a fundamental understanding of the driving forces and cooperativity behind these processes. Once the rules are understood, these guidelines can facilitate the research of highly complex self-assembly processes. Among the various components for self-assembly, an amphiphilic molecule, which contains both hydrophilic and hydrophobic parts, forms one of the most powerful building blocks. When amphiphiles are dispersed in water, the hydrophilic component of the amphiphile preferentially interacts with the aqueous phase while the hydrophobic portion tends to reside in the air or in the nonpolar solvent. Therefore, the amphiphiles aggregate to form different molecular assemblies based on the repelling and coordinating forces between the hydrophilic and hydrophobic parts of the component molecules and the surrounding medium. In contrast to conventional amphiphiles, supra-amphiphiles are constructed on the basis of noncovalent interactions or dynamic covalent bonds. In supra-amphiphiles, the functional groups can be attached to the amphiphiles by noncovalent synthesis, greatly speeding their construction. The building blocks for supra-amphiphiles can be either small organic molecules or polymers. Advances in the development of supra-amphiphiles will not only enrich the family of conventional amphiphiles that are based on covalent bonds but will also provide a new kind of building block for the preparation of complex self-assemblies. When polymers are used to construct supra-amphiphiles, the resulting molecules are known as superamphiphiles. This Account will focus on the use of amphiphiles and supra-amphiphiles for self-assembly at different levels of complexity. We introduce strategies for the fabrication of robust assemblies through self-assembly of amphiphiles. We describe the supramolecular approach for the molecular design of amphiphiles through the enhancement of intermolecular interaction among the amphiphiles. In addition, we describe polymerization under mild conditions to stabilize the assemblies formed by self-assembly of amphiphiles. Finally, we highlight self-assembly methods driven by noncovalent interactions or dynamic covalent bonds for the fabrication of supra-amphiphiles with various topologies. Further self-assembly of supra-amphiphiles provides new building blocks for complex structures, and the dynamic nature of the supra-amphiphiles endows the assemblies with stimuli-responsive functions.

Supramolecular amphiphiles (SA), also named superamphiphiles, refer to amphiphiles that are formed by non-covalent interactions. This tutorial review focuses on the molecular architectures of SAs, including diversified topologies such as single chain, double chain, bolaform, gemini and rotaxane types. Non-covalent syntheses that have been employed to fabricate SAs are driven by hydrogen bonding, electrostatic attraction, host–guest recognition, charge transfer interaction, metal coordination and so on. It should be noted that SAs can be either small organic molecules or polymers. SAs allow for tuning of their amphiphilicity in a reversible fashion, leading to controlled self-assembly and disassembly. This line of research has been enriching traditional colloid chemistry and current supramolecular chemistry, and the application of SAs in the field of functional supramolecular materials is keenly anticipated.

Electrocatalysts with single metal atoms as active sites have received increasing attention owing to their high atomic utilization efficiency and exotic catalytic activity and selectivity. This review aims to provide a comprehensive summary on the recent development of such single-atom electrocatalysts (SAECs) for various energy-conversion reactions. The discussion starts with an introduction of the different types of SAECs, followed by an overview of the synthetic methodologies to control the atomic dispersion of metal sites and atomically resolved characterization using state-of-the-art microscopic and spectroscopic techniques. In recognition of the extensive applications of SAECs, the electrocatalytic studies are dissected in terms of various important electrochemical reactions, including hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), carbon dioxide reduction reaction (CO2RR), and nitrogen reduction reaction (NRR). Examples of SAECs are deliberated in each case in terms of their catalytic performance, structure–property relationships, and catalytic enhancement mechanisms. A perspective is provided at the end of each section about remaining challenges and opportunities for the development of SAECs for the targeted reaction.

Based on the contributions of carbon nanostructures and their composited species, great advances in electromagnetic wave interference shielding have been achieved. In this article, recent progress in electromagnetic wave shielding enabled by the synergism of carbon nanostructures and their corresponding composites is discussed encompassing the factors of microstructural defects, filler concentration, filler alignment, filler inherent conductivity and the surrounding temperature. Carbon nanostructures and their composites would energize the advanced electromagnetic wave shielding because of their light weight, high corrosion resistance, excellent thermal, mechanical, and electrical properties, broad absorption frequency bandwidth and cost-effectiveness. In this context of identifying suitable carbon composites that can enhance electromagnetic wave absorption. This review provides updated electromagnetic wave shielding knowledge of carbon nanostructures and their composites as well as their prospects and challenges.

Advancement in heterogeneous catalysis relies on the capability of altering material structures at the nanoscale, and that is particularly important for the development of highly active electrocatalysts with uncompromised durability. Here, we report the design and synthesis of a Pt-bimetallic catalyst with multilayered Pt-skin surface, which shows superior electrocatalytic performance for the oxygen reduction reaction (ORR). This novel structure was first established on thin film extended surfaces with tailored composition profiles and then implemented in nanocatalysts by organic solution synthesis. Electrochemical studies for the ORR demonstrated that after prolonged exposure to reaction conditions, the Pt-bimetallic catalyst with multilayered Pt-skin surface exhibited an improvement factor of more than 1 order of magnitude in activity versus conventional Pt catalysts. The substantially enhanced catalytic activity and durability indicate great potential for improving the material properties by fine-tuning of the nanoscale architecture.

This review covers some of the most recent advances in stretchable and self-healing polymers and devices for Electronic skin (E-skin) applications. Applications for both stretchable and self-healing materials include, but are not limited to, electronics, displays, energy, the environment, and medicine. While the majority of organic materials can generally be rendered flexible, such materials are not stretchable, which is a key mechanical property necessary to realize applications of E-skin for prosthetics, artificial intelligence, systems for robotics, personal health monitoring, biocompatibility, and communication devices. In our effort to survey materials utilized in various components of an electronic device, we report herein recent advances in stretchable and self-healing conductors, semiconductors, and substrates. We highlight some key technologies recently developed in stretchable organic-based sensors, solar cells, light-emitting diodes, and self-healing electronic devices.

Intrinsically conducting polymers (ICP) and conductive fillers incorporated conductive polymer-based composites (CPC) greatly facilitate the research in electromagnetic interference (EMI) shielding because they not only provide excellent EMI shielding but also have advantages of electromagnetic wave absorption rather than reflection. In this review, the latest developments in ICP and CPC based EMI shielding materials are highlighted. In particular, existing methods for adjusting the morphological structure, electric and magnetic properties of EMI shielding materials are discussed along with the future opportunities and challenges in developing ICP and CPC for EMI shielding applications.

The discovery of ultrahigh piezoelectricity in relaxor-ferroelectric solid solution single crystals is a breakthrough in ferroelectric materials. A key signature of relaxor-ferroelectric solid solutions is the existence of polar nanoregions, a nanoscale inhomogeneity, that coexist with normal ferroelectric domains. Despite two decades of extensive studies, the contribution of polar nanoregions to the underlying piezoelectric properties of relaxor ferroelectrics has yet to be established. Here we quantitatively characterize the contribution of polar nanoregions to the dielectric/piezoelectric responses of relaxor-ferroelectric crystals using a combination of cryogenic experiments and phase-field simulations. The contribution of polar nanoregions to the room-temperature dielectric and piezoelectric properties is in the range of 50-80%. A mesoscale mechanism is proposed to reveal the origin of the high piezoelectricity in relaxor ferroelectrics, where the polar nanoregions aligned in a ferroelectric matrix can facilitate polarization rotation. This mechanism emphasizes the critical role of local structure on the macroscopic properties of ferroelectric materials.

The magnetic relaxation dynamics of low-coordinate DyIII and ErIII complexes, namely three-coordinate ones with an equatorially coordinated triangle geometry and five-coordinate ones with a trigonal bipyramidal geometry, have been exploited for the first time. The three-coordinate Er-based complex is the first equatorially coordinated mononuclear Er-based single-molecule magnet (SMM) corroborating that simple models can effectively direct the design of target SMMs incorporating 4f-elements.

Domestication of wild boar (Sus scrofa) and subsequent selection have resulted in dramatic phenotypic changes in domestic pigs for a number of traits, including behavior, body composition, reproduction, and coat color. Here we have used whole-genome resequencing to reveal some of the loci that underlie phenotypic evolution in European domestic pigs. Selective sweep analyses revealed strong signatures of selection at three loci harboring quantitative trait loci that explain a considerable part of one of the most characteristic morphological changes in the domestic pig--the elongation of the back and an increased number of vertebrae. The three loci were associated with the NR6A1, PLAG1, and LCORL genes. The latter two have repeatedly been associated with loci controlling stature in other domestic animals and in humans. Most European domestic pigs are homozygous for the same haplotype at these three loci. We found an excess of derived nonsynonymous substitutions in domestic pigs, most likely reflecting both positive selection and relaxed purifying selection after domestication. Our analysis of structural variation revealed four duplications at the KIT locus that were exclusively present in white or white-spotted pigs, carrying the Dominant white, Patch, or Belt alleles. This discovery illustrates how structural changes have contributed to rapid phenotypic evolution in domestic animals and how alleles in domestic animals may evolve by the accumulation of multiple causative mutations as a response to strong directional selection.

Abstract The utilization of antiferroelectric (AFE) materials is thought to be an effective approach to enhance the energy density of dielectric capacitors. However, the high energy dissipation and inferior reliability that are associated with the antiferroelectric–ferroelectric phase transition are the main issues that restrict the applications of antiferroelectric ceramics. Here, simultaneously achieving high energy density and efficiency in a dielectric ceramic is proposed by combining antiferroelectric and relaxor features. Based on this concept, a lead‐free dielectric (Na 0.5 Bi 0.5 )TiO 3 ‐ x (Sr 0.7 Bi 0.2 )TiO 3 (NBT‐ x SBT) system is investigated and the corresponding multilayer ceramic capacitors (MLCCs) are fabricated. A record‐high energy density of 9.5 J cm −3 , together with a high energy efficiency of 92%, is achieved in NBT‐0.45SBT multilayer ceramic capacitors, which consist of ten dielectric layers with the single‐layer thickness of 20 µm and the internal electrode area of 6.25 mm 2 . Furthermore, the newly developed capacitor exhibits a wide temperature usage range of ‐60 to 120 °C, with an energy‐density variation of less than 10%, and satisfactory cycling reliability, with degradation of less than 8% over 10 6 cycles. These characteristics demonstrate that the NBT‐0.45SBT multilayer ceramic is a promising candidate for high‐power energy storage applications.

A new family of discrete hexakis-pillar[5]arene metallacycles with different sizes have been successfully prepared via coordination-driven self-assembly, which presented very few successful examples of preparation of discrete multiple pillar[n]arene derivatives. These newly designed hexakis-pillar[5]arene metallacycles were well characterized with one-dimensional (1-D) multinuclear NMR (1H and 31 P NMR), two-dimensional (2-D) 1H–1H COSY and NOESY, ESI-TOF-MS, elemental analysis, and PM6 semiempirical molecular orbital methods. Furthermore, the host–guest complexation of such hexakis-pillar[5]arene hosts with a series of different neutral ditopic guests G1–6 were well investigated. Through host–guest interactions of hexakis-pillar[5]arene metallacycles H2 or H3 with the neutral dinitrile guest G5, the cross-linked supramolecular polymers H2⊃(G5)3 or H3⊃(G5)3 were successfully constructed at the high-concentration region, respectively. Interestingly, these cross-linked supramolecular polymers transformed into the stable supramolecular gels upon increasing the concentrations to a relatively high level. More importantly, by taking advantage of the dynamic nature of metal–ligand bonds and host–guest interactions, the reversible multiple stimuli-responsive gel–sol phase transitions of such polymer gels were successfully realized under different stimuli, such as temperature, halide, and competitive guest, etc. The mechanism of such multiple stimuli-responsive processes was well illustrated by in situ multinuclear NMR investigation. This research not only provides a highly efficient approach to the preparation of discrete multiple pillar[n]arene derivatives but also presents a new family of multiple stimuli-responsive “smart” soft matters.

Open vacancies: A facile one-pot synthesis of oxygen-vacancy-rich ultrathin W18O49 nanowires up to several micrometers long is described. In addition to unique optical properties, such as NIR absorption and blue-light emission, the nanowires show an unexpected ability to photochemically reduce carbon dioxide to methane (see picture) as a result of its defect structure caused by large quantities of oxygen vacancies.

The NLRP3 inflammasome has been implicated in the pathogenesis of a wide variety of human diseases. A few compounds have been developed to inhibit NLRP3 inflammasome activation, but compounds directly and specifically targeting NLRP3 are still not available, so it is unclear whether NLRP3 itself can be targeted to prevent or treat diseases. Here we show that the compound CY-09 specifically blocks NLRP3 inflammasome activation. CY-09 directly binds to the ATP-binding motif of NLRP3 NACHT domain and inhibits NLRP3 ATPase activity, resulting in the suppression of NLRP3 inflammasome assembly and activation. Importantly, treatment with CY-09 shows remarkable therapeutic effects on mouse models of cryopyrin-associated autoinflammatory syndrome (CAPS) and type 2 diabetes. Furthermore, CY-09 is active ex vivo for monocytes from healthy individuals or synovial fluid cells from patients with gout. Thus, our results provide a selective and direct small-molecule inhibitor for NLRP3 and indicate that NLRP3 can be targeted in vivo to combat NLRP3-driven diseases.

Hypoxia, a common feature within many types of solid tumors, is known to be closely associated with limited efficacy for cancer therapies, including radiotherapy (RT) in which oxygen is essential to promote radiation‐induced cell damage. Here, an artificial nanoscale red‐blood‐cell system is designed by encapsulating perfluorocarbon (PFC), a commonly used artificial blood substitute, within biocompatible poly( d , l ‐lactide‐ co ‐glycolide) (PLGA), obtaining PFC@PLGA nanoparticles, which are further coated with a red‐blood‐cell membrane (RBCM). The developed PFC@PLGA‐RBCM nanoparticles with the PFC core show rather efficient loading of oxygen, as well as greatly prolonged blood circulation time owing to the coating of RBCM. With significantly improved extravascular diffusion within the tumor mass, owing to their much smaller nanoscale sizes compared to native RBCs with micrometer sizes, PFC@PLGA‐RBCM nanoparticles are able to effectively deliver oxygen into tumors after intravenous injection, leading to greatly relieved tumor hypoxia and thus remarkably enhanced treatment efficacy during RT. This work thus presents a unique type of nanoscale RBC mimic for efficient oxygen delivery into solid tumors, favorable for cancer treatment by RT, and potentially other types of therapy as well.

A design methodology for developing lead-free bulk ceramics with large recoverable energy storage density was proposed in this study.

A nonpolar/polar composite comprising tungsten sulfide nanosheets on carbon nanofibers (CNFs) is used for the cathode in lithium–sulfur batteries. These batteries demonstrate an ultra-long cycle life of 1500 cycles at a charge/discharge rate of 2 C, and they maintain about 90% specific capacity with a high specific capacity of 502 mA h g−1. These batteries present a significant performance improvement in the field of Li–S batteries. As a service to our authors and readers, this journal provides supporting information supplied by the authors. Such materials are peer reviewed and may be re-organized for online delivery, but are not copy-edited or typeset. Technical support issues arising from supporting information (other than missing files) should be addressed to the authors. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.

Oridonin (Ori) is the major active ingredient of the traditional Chinese medicinal herb Rabdosia rubescens and has anti-inflammatory activity, but the target of Ori remains unknown. NLRP3 is a central component of NLRP3 inflammasome and has been involved in a wide variety of chronic inflammation-driven human diseases. Here, we show that Ori is a specific and covalent inhibitor for NLRP3 inflammasome. Ori forms a covalent bond with the cysteine 279 of NLRP3 in NACHT domain to block the interaction between NLRP3 and NEK7, thereby inhibiting NLRP3 inflammasome assembly and activation. Importantly, Ori has both preventive or therapeutic effects on mouse models of peritonitis, gouty arthritis and type 2 diabetes, via inhibition of NLRP3 activation. Our results thus identify NLRP3 as the direct target of Ori for mediating Ori's anti-inflammatory activity. Ori could serve as a lead for developing new therapeutics against NLRP3-driven diseases.

A self-healing dielectric elastomer is achieved by the incorporation of metal–ligand coordination as cross-linking sites in nonpolar polydimethylsiloxane (PDMS) polymers. The ligand is 2,2′-bipyridine-5,5′-dicarboxylic amide, while the metal salts investigated here are Fe2+ and Zn2+ with various counteranions. The kinetically labile coordination between Zn2+ and bipyridine endows the polymer fast self-healing ability at ambient condition. When integrated into organic field-effect transistors (OFETs) as gate dielectrics, transistors with FeCl2 and ZnCl2 salts cross-linked PDMS exhibited increased dielectric constants compared to PDMS and demonstrated hysteresis-free transfer characteristics, owing to the low ion conductivity in PDMS and the strong columbic interaction between metal cations and the small Cl– anions which can prevent mobile anions drifting under gate bias. Fully stretchable transistors with FeCl2-PDMS dielectrics were fabricated and exhibited ideal transfer characteristics. The gate leakage current remained low even after 1000 cycles at 100% strain. The mechanical robustness and stable electrical performance proved its suitability for applications in stretchable electronics. On the other hand, transistors with gate dielectrics containing large-sized anions (BF4–, ClO4–, CF3SO3–) displayed prominent hysteresis due to mobile anions drifting under gate bias voltage. This work provides insights on future design of self-healing stretchable dielectric materials based on metal–ligand cross-linked polymers.

Patients with low-immunogenic tumors respond poorly to immune checkpoint blockade (ICB) targeting the programmed death-1 (PD-1)/programmed death-ligand 1 (PD-L1) pathway. Conversely, patients responding to ICB can experience various side effects. We have thus engineered a therapeutic scaffold that, when formed in situ, allows the local release of gemcitabine (GEM) and an anti-PD-L1 blocking antibody (aPDL1) with distinct release kinetics. The scaffold consists of reactive oxygen species (ROS)-degradable hydrogel that releases therapeutics in a programmed manner within the tumor microenvironment (TME), which contains abundant ROS. We found that the aPDL1-GEM scaffold elicits an immunogenic tumor phenotype and promotes an immune-mediated tumor regression in the tumor-bearing mice, with prevention of tumor recurrence after primary resection.

Single-walled carbon nanotubes (SWNTs) with various unique optical properties are interesting nanoprobes widely explored in biomedical imaging and phototherapies. Herein, DNA-functionalized SWNTs are modified with noble metal (Ag or Au) nanoparticles via an in situ solution phase synthesis method comprised of seed attachment, seeded growth, and surface modification with polyethylene glycol (PEG), yielding SWNT-Ag-PEG and SWNT-Au-PEG nanocomposites stable in physiological environments. With gold or silver nanoparticles decorated on the surface, the SWNT-metal nanocomposites gain an excellent concentration and excitation-source dependent surface-enhanced Raman scattering (SERS) effect. Using a near-infrared (NIR) laser as the excitation source, targeted Raman imaging of cancer cells labeled with folic acid (FA) conjugated SWNT-Au nanocomposite (SWNT-Au-PEG-FA) is realized, with images acquired in significantly shortened periods of time as compared to that of using nonenhanced SWNT Raman probes. Owing to the strong surface plasmon resonance absorption contributed by the gold shell, the SWNTs-Au-PEG-FA nanocomposite also offers remarkably improved photothermal cancer cell killing efficacy. This work presents a facile approach to synthesize water-soluble noble metal coated SWNTs with a strong SERS effect suitable for labeling and fast Raman spectroscopic imaging of biological samples, which has been rarely realized before. The SWNT-Au-PEG nanocomposite developed here may thus be an interesting optical theranostic probe for cancer imaging and therapy.

Although generally considered competitive, the alkenylation and carbonyl olefination routes to alkenes are also complementary. In this Account, we focus on these approaches for the synthesis of regio- and stereodefined di- and trisubstituted alkenes and a few examples of tetrasubstituted alkenes. We also discuss the subset of regio- and stereodefined dienes and oligoenes that are conjugated. Pd-catalyzed cross-coupling using alkenyl metals containing Zn, Al, Zr, and B (Negishi coupling and Suzuki coupling) or alkenyl halides and related alkenyl electrophiles provides a method of alkenylation with the widest applicability and predictability, with high stereo- and regioselectivity. The requisite alkenyl metals or alkenyl electrophiles are most commonly prepared through highly selective alkyne addition reactions including (i) conventional polar additions, (ii) hydrometalation, (iii) carbometalation, (iv) halometalation, and (v) other heteroatom-metal additions. Although much more limited in applicability, the Heck alkenylation offers an operationally simpler, viable alternative when it is highly selective and satisfactory. A wide variety of carbonyl olefination reactions, especially the Wittig olefination and its modifications represented by the E-selective HWE olefination and the Z-selective Still-Gennari olefination, collectively offer the major alternative to the Pd-catalyzed alkenylation. However, the carbonyl olefination method fundamentally suffers from more limited stereochemical options and generally lower stereoselectivity levels than the Pd-catalyzed alkenylation. In a number of cases, however, very high (>98%) stereoselectivity levels have been attained in the syntheses of both E and Z isomers. The complementarity of the alkenylation and carbonyl olefination routes provide synthetic chemists with valuable options. While the alkenylation involves formation of a C-C single bond to a CC bond, the carbonyl olefination converts a CO bond to a CC bond. When a precursor to the desired alkene is readily available as an aldehyde, the carbonyl olefination is generally the more convenient of the two. This is a particularly important factor in many cases where the desired alkene contains an allylic asymmetric carbon center, since alpha-chiral aldehydes can be prepared by a variety of known asymmetric methods and readily converted to allylically chiral alkenes via carbonyl olefination. On the other hand, a homoallylically carbon-branched asymmetric center can be readily installed by either Pd-catalyzed isoalkyl-alkenyl coupling or Zr-catalyzed asymmetric carboalumination (ZACA reaction) of 1,4-dienes. In short, it takes all kinds to make alkenes, just as it takes all kinds to make the world.

Peripheral T-cell lymphoma (PTCL) encompasses a heterogeneous group of neoplasms with generally poor clinical outcome. Currently 50% of PTCL cases are not classifiable: PTCL-not otherwise specified (NOS). Gene-expression profiles on 372 PTCL cases were analyzed and robust molecular classifiers and oncogenic pathways that reflect the pathobiology of tumor cells and their microenvironment were identified for major PTCL-entities, including 114 angioimmunoblastic T-cell lymphoma (AITL), 31 anaplastic lymphoma kinase (ALK)-positive and 48 ALK-negative anaplastic large cell lymphoma, 14 adult T-cell leukemia/lymphoma and 44 extranodal NK/T-cell lymphoma that were further separated into NK-cell and gdT-cell lymphomas. Thirty-seven percent of morphologically diagnosed PTCL-NOS cases were reclassified into other specific subtypes by molecular signatures. Reexamination, immunohistochemistry, and IDH2 mutation analysis in reclassified cases supported the validity of the reclassification. Two major molecular subgroups can be identified in the remaining PTCL-NOS cases characterized by high expression of either GATA3 (33%; 40/121) or TBX21 (49%; 59/121). The GATA3 subgroup was significantly associated with poor overall survival (P = .01). High expression of cytotoxic gene-signature within the TBX21 subgroup also showed poor clinical outcome (P = .05). In AITL, high expression of several signatures associated with the tumor microenvironment was significantly associated with outcome. A combined prognostic score was predictive of survival in an independent cohort (P = .004).

We report the design and synthesis of multimetallic Au/Pt-bimetallic nanoparticles as a highly durable electrocatalyst for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells. This system was first studied on well-defined Pt and FePt thin films deposited on a Au(111) surface, which has guided the development of novel synthetic routes toward shape-controlled Au nanoparticles coated with a Pt-bimetallic alloy. It has been demonstrated that these multimetallic Au/FePt(3) nanoparticles possess both the high catalytic activity of Pt-bimetallic alloys and the superior durability of the tailored morphology and composition profile, with mass-activity enhancement of more than 1 order of magnitude over Pt catalysts. The reported synergy between well-defined surfaces and nanoparticle synthesis offers a persuasive approach toward advanced functional nanomaterials.

Rechargeable aqueous zinc-ion batteries (ZIBs) are feasible for grid-scale applications due to their unique attributes such as safe, sustainable, and low-cost. However, it is limited by cathode materials, which requires a stable host structure and fast channel for zinc ions diffusion. Here, we develop various kinds of potassium vanadates (K2V8O21, K0.25V2O5, K2V6O16·1.57H2O and KV3O8) as cathodes for aqueous ZIBs. K2V8O21 and K0.25V2O5 with tunnel structure can maintain a stable structure and are conducive to the faster zinc ion diffusion during repeated cycles compared to the layered KV3O8 and K2V6O16·1.57H2O that suffer from structural collapse. The optimal K2V8O21 cathode exhibits excellent zinc storage performance, with a high capacity of 247 mA h g−1 at 0.3 A g−1 and a good rate at 6 A g−1 as well as excellent cyclic stability up to 300 cycles. The results suggest K2V8O21 is a very promising cathode for aqueous ZIBs, which could be extended to construct other high-performance cathode materials with a similar crystal structure (e.g. β-Na0.33V2O5, Li0.3V2O5, Ag0.33V2O5, etc.) for zinc storage.

Clear sight: The upconversion emission spectra of KMnF3 nanocrystals co-doped with Yb/Er (18:2 mol %; see picture) and Yb/Ho (18:2 mol %) reveal strong single-band emissions. The application of this pure, single-band emission for deep-tissue imaging is demonstrated. Detailed facts of importance to specialist readers are published as ”Supporting Information”. Such documents are peer-reviewed, but not copy-edited or typeset. They are made available as submitted by the authors. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.

The findings in this study could broaden the applications of KNN materials in a new field.

Acetylation of tau at K174 is identified in Alzheimer's disease (AD) brain tissue and exacerbates tau-mediated neurodegeneration and memory impairments in mice. Pharmacological inhibition of tau acetylation ameliorates these phenotypes in a mouse model of AD. Tauopathies, including frontotemporal dementia (FTD) and Alzheimer's disease (AD), are neurodegenerative diseases in which tau fibrils accumulate. Recent evidence supports soluble tau species as the major toxic species. How soluble tau accumulates and causes neurodegeneration remains unclear. Here we identify tau acetylation at Lys174 (K174) as an early change in AD brains and a critical determinant in tau homeostasis and toxicity in mice. The acetyl-mimicking mutant K174Q slows tau turnover and induces cognitive deficits in vivo. Acetyltransferase p300-induced tau acetylation is inhibited by salsalate and salicylate, which enhance tau turnover and reduce tau levels. In the PS19 transgenic mouse model of FTD, administration of salsalate after disease onset inhibited p300 activity, lowered levels of total tau and tau acetylated at K174, rescued tau-induced memory deficits and prevented hippocampal atrophy. The tau-lowering and protective effects of salsalate were diminished in neurons expressing K174Q tau. Targeting tau acetylation could be a new therapeutic strategy against human tauopathies.

Bacterial infection has been a great threat to dermal wounds, especially to difficult-to-heal diabetic wounds. It is known that reactive oxygen species (ROS) generated by wounds or bacterial infection could further impede wound healing. Here, a type of ROS-scavenging hydrogel is developed by using polyvinyl alcohol (PVA) cross-linked by a ROS-responsive linker. The obtained hydrogel could act as an effective ROS-scavenging agent to promote the wound closure by decreasing the ROS level and up-regulating M2 phenotype macrophages around the wound. Importantly, such hydrogel formed in the wound could allow release of therapeutics, including mupirocin to kill bacteria, and granulocyte-macrophage colony-stimulating factor (GM-CSF) to accelerate the wound closure, in responsive to endogenous ROS existing in the wound microenvironment. Remarkably, our drug-loaded ROS-scavenging hydrogel could be employed to effectively treat various types of wounds including difficult-to-heal diabetic wounds with bacterial infection. Therefore, this work presents an effective strategy based on ROS-scavenging hydrogel for wound healing under various kinds of complications.

Abstract Ammonia represents a promising liquid fuel for hydrogen storage, but its large-scale application is limited by the need for precious metal ruthenium (Ru) as catalyst. Here we report on highly efficient ammonia decomposition using novel high-entropy alloy (HEA) catalysts made of earth abundant elements. Quinary CoMoFeNiCu nanoparticles are synthesized in a single solid-solution phase with robust control over the Co/Mo atomic ratio, including those ratios considered to be immiscible according to the Co-Mo bimetallic phase diagram. These HEA nanoparticles demonstrate substantially enhanced catalytic activity and stability for ammonia decomposition, with improvement factors achieving &gt;20 versus Ru catalysts. Catalytic activity of HEA nanoparticles is robustly tunable by varying the Co/Mo ratio, allowing for the optimization of surface property to maximize the reactivity under different reaction conditions. Our work highlights the great potential of HEAs for catalyzing chemical transformation and energy conversion reactions.

Harnessing self-tuned strain Strain can modify the electronic properties of a metal and has provided a method for enhancing electrocatalytic activity. For practical catalysts, nanomaterials with high surface areas are needed. However, for nanoparticles, strain is often induced with overlayers (adsorbates or heteroatoms) that can undergo reconstruction during operation that releases the induced strain. Wang et al. show that freestanding palladium nanosheets (three to five monolayers thick) form with an internal compressive strain of 1 to 2% and can be much more active for both the oxygen and hydrogen evolution reactions under alkaline conditions compared with nanoparticles. Science , this issue p. 870

Identifying suitable layered materials as electrodes with desirable electrochemical properties remains a key challenge for rechargeable Na-ion batteries (NIBs). Using first principles methods, here we examine the efficacy of layered molybdenum disulphide (MoS2) as a host electrode material for NIBs. We identify various low energy Na adsorption sites and evaluate the stability of the hexagonal and tetragonal polytypes of MoS2 upon Na intercalation. Our results illustrate a moderately strong binding between Na and MoS2 that is thermodynamically favorable against the cluster formation and phase separation of Na. We find that while Na intercalation in MoS2 results in a phase transformation from the hexagonal phase to the tetragonal phase, it gives rise to a maximum theoretical capacity of 146 mAh g−1 and a low average electrode potential in the range of 0.75–1.25 V. Our calculations of Na diffusion kinetics indicates a moderately fast mobility of Na in the van der Waals interlayer spaces of MoS2. These results highlight the promise of MoS2 as an appealing negative electrode (anode) for rechargeable NIBs.

We aim to quantitatively synthesise available epidemiological evidence on the prevalence rates of workplace violence (WPV) by patients and visitors against healthcare workers. We systematically searched PubMed, Embase and Web of Science from their inception to October 2018, as well as the reference lists of all included studies. Two authors independently assessed studies for inclusion. Data were double-extracted and discrepancies were resolved by discussion. The overall percentage of healthcare worker encounters resulting in the experience of WPV was estimated using random-effects meta-analysis. The heterogeneity was assessed using the I 2 statistic. Differences by study-level characteristics were estimated using subgroup analysis and meta-regression. We included 253 eligible studies (with a total of 331 544 participants). Of these participants, 61.9% (95% CI 56.1% to 67.6%) reported exposure to any form of WPV, 42.5% (95% CI 38.9% to 46.0%) reported exposure to non-physical violence, and 24.4% (95% CI 22.4% to 26.4%) reported experiencing physical violence in the past year. Verbal abuse (57.6%; 95% CI 51.8% to 63.4%) was the most common form of non-physical violence, followed by threats (33.2%; 95% CI 27.5% to 38.9%) and sexual harassment (12.4%; 95% CI 10.6% to 14.2%). The proportion of WPV exposure differed greatly across countries, study location, practice settings, work schedules and occupation. In this systematic review, the prevalence of WPV against healthcare workers is high, especially in Asian and North American countries, psychiatric and emergency department settings, and among nurses and physicians. There is a need for governments, policymakers and health institutions to take actions to address WPV towards healthcare professionals globally.

Synapses between engram cells are believed to be substrates for memory storage, and the weakening or loss of these synapses leads to the forgetting of related memories. We found engulfment of synaptic components by microglia in the hippocampi of healthy adult mice. Depletion of microglia or inhibition of microglial phagocytosis prevented forgetting and the dissociation of engram cells. By introducing CD55 to inhibit complement pathways, specifically in engram cells, we further demonstrated that microglia regulated forgetting in a complement- and activity-dependent manner. Additionally, microglia were involved in both neurogenesis-related and neurogenesis-unrelated memory degradation. Together, our findings revealed complement-dependent synapse elimination by microglia as a mechanism underlying the forgetting of remote memories.

Suppressing nucleation over large areas Although formamidinium-based lead iodide (PbI 2 ) perovskites have a favorable bandgap and good thermal stability, the difficulty in controlling nucleation makes it difficult to grow high-quality, large-area films compared with methylammonium counterparts. Bu et al. show that adding N -methyl-2-pyrrolidone to the perovskite precursors forms an adduct with PbI 2 that promotes the formation of the desired black α-phase at room temperature. The addition of potassium hexafluorophosphate eliminated hysteresis by passivating interfacial defects and promoted long-term thermal stability at 85°C in unencapsulated devices. Large-area modules (17 square centimeters) achieved power conversion efficiencies of 20.4%. Science , abh1035, this issue p. 1327

Abstract Glutathione peroxidase 4 (GPX4) utilizes glutathione (GSH) to detoxify lipid peroxidation and plays an essential role in inhibiting ferroptosis. As a selenoprotein, GPX4 protein synthesis is highly inefficient and energetically costly. How cells coordinate GPX4 synthesis with nutrient availability remains unclear. In this study, we perform integrated proteomic and functional analyses to reveal that SLC7A11-mediated cystine uptake promotes not only GSH synthesis, but also GPX4 protein synthesis. Mechanistically, we find that cyst(e)ine activates mechanistic/mammalian target of rapamycin complex 1 (mTORC1) and promotes GPX4 protein synthesis at least partly through the Rag-mTORC1-4EBP signaling axis. We show that pharmacologic inhibition of mTORC1 decreases GPX4 protein levels, sensitizes cancer cells to ferroptosis, and synergizes with ferroptosis inducers to suppress patient-derived xenograft tumor growth in vivo. Together, our results reveal a regulatory mechanism to coordinate GPX4 protein synthesis with cyst(e)ine availability and suggest using combinatorial therapy of mTORC1 inhibitors and ferroptosis inducers in cancer treatment.

Piezoelectric nanogenerators with large output, high sensitivity, and good flexibility have attracted extensive interest in wearable electronics and personal healthcare. In this paper, the authors propose a high-performance flexible piezoelectric nanogenerator based on piezoelectrically enhanced nanocomposite micropillar array of polyvinylidene fluoride-trifluoroethylene (P(VDF-TrFE))/barium titanate (BaTiO3 ) for energy harvesting and highly sensitive self-powered sensing. By a reliable and scalable nanoimprinting process, the piezoelectrically enhanced vertically aligned P(VDF-TrFE)/BaTiO3 nanocomposite micropillar arrays are fabricated. The piezoelectric device exhibits enhanced voltage of 13.2 V and a current density of 0.33 µA cm-2 , which an enhancement by a factor of 7.3 relatives to the pristine P(VDF-TrFE) bulk film. The mechanisms of high performance are mainly attributed to the enhanced piezoelectricity of the P(VDF-TrFE)/BaTiO3 nanocomposite materials and the improved mechanical flexibility of the micropillar array. Under mechanical impact, stable electricity is stably generated from the nanogenerator and used to drive various electronic devices to work continuously, implying its significance in the field of consumer electronic devices. Furthermore, it can be applied as self-powered flexible sensor work in a noncontact mode for detecting air pressure and wearable sensors for detecting some human vital signs including different modes of breath and heartbeat pulse, which shows its potential applications in flexible electronics and medical sciences.

Biomedical researchers have become increasingly aware of the limitations of time-honored conventional 2D tissue cell cultures where most tissue cell studies have been carried out. They are now searching for 3D cell culture systems, something between a petri dish and a mouse. It has become apparent that 3D cell culture offers a more realistic micro- and local-environment where the functional properties of cells can be observed and manipulated that is not possible in animals. A newly designer self-assembling peptide scaffolds may provide an ideally alternative system. The important implications of 3D tissue cell cultures for basic cell biology, tumor biology, high-content drug screening, and regenerative medicine and beyond could be profound.

Abstract Chimeric antigen receptor (CAR)‐redirected T lymphocytes (CAR T cells) show modest therapeutic efficacy in solid tumors. The desmoplastic structure of the tumor and the immunosuppressive tumor microenvironment usually account for the reduced efficacy of CAR T cells in solid tumors. Mild hyperthermia of the tumor reduces its compact structure and interstitial fluid pressure, increases blood perfusion, releases antigens, and promotes the recruitment of endogenous immune cells. Therefore, the combination of mild hyperthermia with the adoptive transfer of CAR T cells can potentially increase the therapeutic index of these cells in solid tumors. It is found that the chondroitin sulfate proteoglycan‐4 (CSPG4)‐specific CAR T cells infused in Nod scid gamma mice engrafted with the human melanoma WM115 cell line have superior antitumor activity after photothermal ablation of the tumor. The findings suggest that photothermal therapy facilitates the accumulation and effector function of CAR T cells within solid tumors.

This review paper summarizes the categories, sensing mechanisms, and affecting factors of flexible conductive polymer composite-based stretchable strain sensors.

Angewandte Chemie International EditionVolume 50, Issue 5 p. 1072-1075 Communication Metal–Organic Conjugated Microporous Polymers† Dr. Jia-Xing Jiang, Dr. Jia-Xing Jiang Department of Chemistry and Centre for Materials Discovery, University of Liverpool, Crown Street, Liverpool (UK), Fax: (+44) 151-794-2304Search for more papers by this authorChao Wang, Chao Wang Department of Chemistry and Centre for Materials Discovery, University of Liverpool, Crown Street, Liverpool (UK), Fax: (+44) 151-794-2304Search for more papers by this authorAndrea Laybourn, Andrea Laybourn Department of Chemistry and Centre for Materials Discovery, University of Liverpool, Crown Street, Liverpool (UK), Fax: (+44) 151-794-2304Search for more papers by this authorDr. Tom Hasell, Dr. Tom Hasell Department of Chemistry and Centre for Materials Discovery, University of Liverpool, Crown Street, Liverpool (UK), Fax: (+44) 151-794-2304Search for more papers by this authorRob Clowes, Rob Clowes Department of Chemistry and Centre for Materials Discovery, University of Liverpool, Crown Street, Liverpool (UK), Fax: (+44) 151-794-2304Search for more papers by this authorDr. Yaroslav Z. Khimyak, Dr. Yaroslav Z. Khimyak Department of Chemistry and Centre for Materials Discovery, University of Liverpool, Crown Street, Liverpool (UK), Fax: (+44) 151-794-2304Search for more papers by this authorProf. Jianliang Xiao, Prof. Jianliang Xiao Department of Chemistry and Centre for Materials Discovery, University of Liverpool, Crown Street, Liverpool (UK), Fax: (+44) 151-794-2304Search for more papers by this authorDr. Simon J. Higgins, Dr. Simon J. Higgins Department of Chemistry and Centre for Materials Discovery, University of Liverpool, Crown Street, Liverpool (UK), Fax: (+44) 151-794-2304Search for more papers by this authorDr. Dave J. Adams, Dr. Dave J. Adams Department of Chemistry and Centre for Materials Discovery, University of Liverpool, Crown Street, Liverpool (UK), Fax: (+44) 151-794-2304Search for more papers by this authorProf. Andrew I. Cooper, Corresponding Author Prof. Andrew I. Cooper aicooper@liv.ac.uk Department of Chemistry and Centre for Materials Discovery, University of Liverpool, Crown Street, Liverpool (UK), Fax: (+44) 151-794-2304Department of Chemistry and Centre for Materials Discovery, University of Liverpool, Crown Street, Liverpool (UK), Fax: (+44) 151-794-2304Search for more papers by this author Dr. Jia-Xing Jiang, Dr. Jia-Xing Jiang Department of Chemistry and Centre for Materials Discovery, University of Liverpool, Crown Street, Liverpool (UK), Fax: (+44) 151-794-2304Search for more papers by this authorChao Wang, Chao Wang Department of Chemistry and Centre for Materials Discovery, University of Liverpool, Crown Street, Liverpool (UK), Fax: (+44) 151-794-2304Search for more papers by this authorAndrea Laybourn, Andrea Laybourn Department of Chemistry and Centre for Materials Discovery, University of Liverpool, Crown Street, Liverpool (UK), Fax: (+44) 151-794-2304Search for more papers by this authorDr. Tom Hasell, Dr. Tom Hasell Department of Chemistry and Centre for Materials Discovery, University of Liverpool, Crown Street, Liverpool (UK), Fax: (+44) 151-794-2304Search for more papers by this authorRob Clowes, Rob Clowes Department of Chemistry and Centre for Materials Discovery, University of Liverpool, Crown Street, Liverpool (UK), Fax: (+44) 151-794-2304Search for more papers by this authorDr. Yaroslav Z. Khimyak, Dr. Yaroslav Z. Khimyak Department of Chemistry and Centre for Materials Discovery, University of Liverpool, Crown Street, Liverpool (UK), Fax: (+44) 151-794-2304Search for more papers by this authorProf. Jianliang Xiao, Prof. Jianliang Xiao Department of Chemistry and Centre for Materials Discovery, University of Liverpool, Crown Street, Liverpool (UK), Fax: (+44) 151-794-2304Search for more papers by this authorDr. Simon J. Higgins, Dr. Simon J. Higgins Department of Chemistry and Centre for Materials Discovery, University of Liverpool, Crown Street, Liverpool (UK), Fax: (+44) 151-794-2304Search for more papers by this authorDr. Dave J. Adams, Dr. Dave J. Adams Department of Chemistry and Centre for Materials Discovery, University of Liverpool, Crown Street, Liverpool (UK), Fax: (+44) 151-794-2304Search for more papers by this authorProf. Andrew I. Cooper, Corresponding Author Prof. Andrew I. Cooper aicooper@liv.ac.uk Department of Chemistry and Centre for Materials Discovery, University of Liverpool, Crown Street, Liverpool (UK), Fax: (+44) 151-794-2304Department of Chemistry and Centre for Materials Discovery, University of Liverpool, Crown Street, Liverpool (UK), Fax: (+44) 151-794-2304Search for more papers by this author First published: 22 December 2010 https://doi.org/10.1002/anie.201005864Citations: 301 † We gratefully acknowledge the EPSRC for funding (EP/F057865/1 and EP/H000925). Read the full textAboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinked InRedditWechat Abstract Two versatile strategies for preparing metal–organic conjugated microporous polymers (MO-CMPs) containing metals such as rhenium, rhodium, and iridium are described (see example). These materials combine the uninterrupted extended electronic conjugation in the network with catalytically active metal sites. Citing Literature Supporting Information Detailed facts of importance to specialist readers are published as "Supporting Information". Such documents are peer-reviewed, but not copy-edited or typeset. They are made available as submitted by the authors. Filename Description anie_201005864_sm_miscellaneous_information.pdf1.7 MB miscellaneous_information Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article. Volume50, Issue5February 1, 2011Pages 1072-1075 RelatedInformation

Basal-like breast cancer exhibits a triple-negative phenotype and has a poor prognosis, even with traditional chemical and anti-human epidermal growth factor receptor (HER) treatments. However, the high mutation rate of this obstinate cancer type renders it suitable for immunotherapy. Photothermal therapy (PTT) is a high-efficiency method for inducing tumor neoantigen release in situ, which has great potential for use in cancer immunotherapy. Here, we prepared a biomimetic black phosphorus quantum dot (BPQDs) formulation to induce breast cancer cell apoptosis in situ by near-infrared (NIR) laser irradiation to mobilize the immune system to eliminate the residual and metastatic cancer cells. Erythrocyte membranes (RMs) were used to coat the BPQDs, forming a BPQD-RM nanovesicle (BPQD-RMNV) biomimetic formulation that exhibited a long circulation time and tumor accumulation in vivo. The basal-like 4T1 breast tumor underwent apoptosis and necrosis with the irradiation and recruited dendritic cells (DCs) to capture the tumor antigens in vivo. Furthermore, programmed cell death protein 1 (PD-1) antibody (aPD-1) was employed to prevent the CD8+ T cells from exhaustion. Notably, BPQD-RMNV-mediated PTT combined with aPD-1 treatment significantly delayed residual and metastatic tumor growth in vivo. Hence, BPQD-RMNV-mediated PTT combined with immune checkpoint blockade antibody increased the infiltration and activity of CD8+ T cells in the tumor, which directly restrained basal-like breast tumor growth in vivo.

Melanin is capable of transforming 99.9% of the absorbed sunlight energy into heat, reducing the risk of skin cancer. We here develop a melanin-mediated cancer immunotherapy strategy through a transdermal microneedle patch. B16F10 whole tumor lysate containing melanin is loaded into polymeric microneedles that allow sustained release of the lysate upon insertion into the skin. In combination with the near-infrared light irradiation, melanin in the patch mediates the generation of heat, which further promotes tumor-antigen uptake by dendritic cells, and leads to enhanced antitumor vaccination. We found that the spatiotemporal photoresponsive immunotherapy increases infiltration of polarized T cells and local cytokine release. These immunological effects increase the survival of mice after tumor challenge and elicited antitumor effects toward established primary tumor and distant tumor. Collectively, melanin generates local heat, boosts T cell activities by transdermal vaccines, and promotes antitumor immune responses.

The generation of singlet oxygen (1 O2 ) during photodynamic therapy is limited by the precise cooperation of light, photosensitizer, and oxygen, and the therapeutic efficiency is restricted by the elevated glutathione (GSH) levels in cancer cells. Herein, we report that an ultrathin two-dimensional metal-organic framework of Cu-TCPP nanosheets (TCPP=tetrakis(4-carboxyphenyl)porphyrin) can selectively generate 1 O2 in a tumor microenvironment. This process is based on the peroxidation of the TCPP ligand by acidic H2 O2 followed by reduction to peroxyl radicals under the action of the peroxidase-like nanosheets and Cu2+ , and their spontaneous recombination reaction by the Russell mechanism. In addition, the nanosheets can also deplete GSH. Consequently, the Cu-TCPP nanosheets can selectively destroy tumor cells with high efficiency, constituting an attractive way to overcome current limitations of photodynamic therapy.

In recent years, graphene and graphene-based nanocomposites owning to their highly enriched physical and chemical properties have been widely explored for applications in many different fields including biomedicine. In the present work, we decorate graphene oxide (GO) by both iron oxide nanoparticles (IONPs) and gold, forming a multi-functional magnetic & plasmonic GO-IONP-Au nanocomposite with strong superparamagnetism and significantly enhanced optical absorbance in the near-infrared (NIR) region. We then coat the nanocomposite with polyethylene glycol (PEG), obtaining GO-IONP-Au-PEG with high stability in physiological environments and no significant in vitro toxicity. Remarkably enhanced photothermal cancer ablation effect using GO-IONP-Au-PEG is realized in comparison to PEGylated GO used in our earlier studies, as demonstrated in both in vitro cell tests and in vivo animal experiments. Moreover, the IONP and Au compartments in the GO-IONP-Au-PEG nanocomposite could be further taken advantages for magnetic resonance (MR) and X-ray dual-modal imaging. Our work shows the promise of using graphene-based multi-functional nanocomposite as cancer theranostics.

SLC7A11-mediated cystine uptake suppresses ferroptosis yet promotes cell death under glucose starvation; the nature of the latter cell death remains unknown. Here we show that aberrant accumulation of intracellular disulfides in SLC7A11high cells under glucose starvation induces a previously uncharacterized form of cell death distinct from apoptosis and ferroptosis. We term this cell death disulfidptosis. Chemical proteomics and cell biological analyses showed that glucose starvation in SLC7A11high cells induces aberrant disulfide bonds in actin cytoskeleton proteins and F-actin collapse in a SLC7A11-dependent manner. CRISPR screens and functional studies revealed that inactivation of the WAVE regulatory complex (which promotes actin polymerization and lamellipodia formation) suppresses disulfidptosis, whereas constitutive activation of Rac promotes disulfidptosis. We further show that glucose transporter inhibitors induce disulfidptosis in SLC7A11high cancer cells and suppress SLC7A11high tumour growth. Our results reveal that the susceptibility of the actin cytoskeleton to disulfide stress mediates disulfidptosis and suggest a therapeutic strategy to target disulfidptosis in cancer treatment.

Inflammation-triggered combination delivery of anti-PD-1 antibody and CpG oligodeoxynucleotides (CpG ODNs) has been demonstrated to prevent cancer relapse utilizing postsurgical inflammatory response. The controlled release of anti-PD1 and CpG ODN by CpG DNA-based "nano-cocoons" can induce considerable immune response, which in turn significantly prolongs the survival time of mice. As a service to our authors and readers, this journal provides supporting information supplied by the authors. Such materials are peer reviewed and may be re-organized for online delivery, but are not copy-edited or typeset. Technical support issues arising from supporting information (other than missing files) should be addressed to the authors. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.

The current widespread of COVID-19 all over the world, which is caused by SARS-CoV-2 virus, has again emphasized the importance of development of point-of-care (POC) diagnostics for timely prevention and control of the pandemic. Compared with labor- and time-consuming traditional diagnostic methods, POC diagnostics exhibit several advantages such as faster diagnostic speed, better sensitivity and specificity, lower cost, higher efficiency and ability of on-site detection. To achieve POC diagnostics, developing POC detection methods and correlated POC devices is the key and should be given top priority. The fast development of microfluidics, micro electro-mechanical systems (MEMS) technology, nanotechnology and materials science, have benefited the production of a series of portable, miniaturized, low cost and highly integrated POC devices for POC diagnostics of various infectious diseases. In this review, various POC detection methods for the diagnosis of infectious diseases, including electrochemical biosensors, fluorescence biosensors, surface-enhanced Raman scattering (SERS)-based biosensors, colorimetric biosensors, chemiluminiscence biosensors, surface plasmon resonance (SPR)-based biosensors, and magnetic biosensors, were first summarized. Then, recent progresses in the development of POC devices including lab-on-a-chip (LOC) devices, lab-on-a-disc (LOAD) devices, microfluidic paper-based analytical devices (μPADs), lateral flow devices, miniaturized PCR devices, and isothermal nucleic acid amplification (INAA) devices, were systematically discussed. Finally, the challenges and future perspectives for the design and development of POC detection methods and correlated devices were presented. The ultimate goal of this review is to provide new insights and directions for the future development of POC diagnostics for the management of infectious diseases and contribute to the prevention and control of infectious pandemics like COVID-19.

High‐performance flexible energy‐storage devices have great potential as power sources for wearable electronics. One major limitation to the realization of these applications is the lack of flexible electrodes with excellent mechanical and electrochemical properties. Currently employed batteries and supercapacitors are mainly based on electrodes that are not flexible enough for these purposes. Here, a three‐dimensionally interconnected hybrid hydrogel system based on carbon nanotube (CNT)‐conductive polymer network architecture is reported for high‐performance flexible lithium ion battery electrodes. Unlike previously reported conducting polymers (e.g., polyaniline, polypyrrole, polythiophene), which are mechanically fragile and incompatible with aqueous solution processing, this interpenetrating network of the CNT‐conducting polymer hydrogel exibits good mechanical properties, high conductivity, and facile ion transport, leading to facile electrode kinetics and high strain tolerance during electrode volume change. A high‐rate capability for TiO 2 and high cycling stability for SiNP electrodes are reported. Typically, the flexible TiO 2 electrodes achieved a capacity of 76 mAh g –1 in 40 s of charge/discharge and a high areal capacity of 2.2 mAh cm –2 can be obtained for flexible SiNP‐based electrodes at 0.1C rate. This simple yet efficient solution process is promising for the fabrication of a variety of high performance flexible electrodes.

Abstract To understand Wuhan residents’ psychological reactions to the COVID-19 epidemic and offer a reference point for interventions, an online questionnaire survey was conducted. It included the Disorder 7-Item Scale (GAD-7), the Patient Health Questionnaire 9-Item Scale (PHQ-9), Athens Insomnia Scale, and Simplified Coping Style Questionnaire. Categorical data were reported as numbers and percentages. Multivariate logistic regression models were used to evaluate the association between demographic factors and anxiety, depression, sleep disorder, and passive coping style. A total of 1242 Wuhan residents investigated, 27.5% had anxiety, 29.3% had depression, 30.0% had a sleep disorder, and 29.8% had a passive response to COVID-19. Being female was the risk factor for anxiety ( OR = 1.62) and sleep disorder ( OR = 1.36); being married was associated with anxiety ( OR = 1.75); having a monthly income between 1000 and 5000 CNY ( OR = 1.44, OR = 1.83, OR = 2.61) or &gt;5000 CNY ( OR = 1.47, OR = 1.45, OR = 2.14) was a risk factor for anxiety, depression, and sleep disorder; not exercising ( OR = 1.45, OR = 1.71, OR = 1. 85, OR = 1.71) was a common risk factor for anxiety, depression, sleep disorder, and passive coping style; and having a higher education level (bachelor’s degree and above) ( OR = 1.40) was associated with having a sleep disorder. Wuhan residents’ psychological status and sleep quality were relatively poorer than they were before the COVID-19 epidemic; however, the rate of passive coping to stress was relatively higher.

The stability of single-atom catalysts is critical for their practical applications. Although a high temperature can promote the bond formation between metal atoms and the substrate with an enhanced stability, it often causes atom agglomeration and is incompatible with many temperature-sensitive substrates. Here, we report using controllable high-temperature shockwaves to synthesize and stabilize single atoms at very high temperatures (1,500-2,000 K), achieved by a periodic on-off heating that features a short on state (55 ms) and a ten-times longer off state. The high temperature provides the activation energy for atom dispersion by forming thermodynamically favourable metal-defect bonds and the off-state critically ensures the overall stability, especially for the substrate. The resultant high-temperature single atoms exhibit a superior thermal stability as durable catalysts. The reported shockwave method is facile, ultrafast and universal (for example, Pt, Ru and Co single atoms, and carbon, C3N4 and TiO2 substrates), which opens a general route for single-atom manufacturing that is conventionally challenging.

All-solid-state Li-ion batteries promise safer electrochemical energy storage with larger volumetric and gravimetric energy densities. A major concern is the limited electrochemical stability of solid electrolytes and related detrimental electrochemical reactions, especially because of our restricted understanding. Here we demonstrate for the argyrodite-, garnet- and NASICON-type solid electrolytes that the favourable decomposition pathway is indirect rather than direct, via (de)lithiated states of the solid electrolyte, into the thermodynamically stable decomposition products. The consequence is that the electrochemical stability window of the solid electrolyte is notably larger than predicted for direct decomposition, rationalizing the observed stability window. The observed argyrodite metastable (de)lithiated solid electrolyte phases contribute to the (ir)reversible cycling capacity of all-solid-state batteries, in addition to the contribution of the decomposition products, comprehensively explaining solid electrolyte redox activity. The fundamental nature of the proposed mechanism suggests this is a key aspect for solid electrolytes in general, guiding interface and material design for all-solid-state batteries. Although all-solid-state Li-ion batteries exhibit enhanced energy densities, electrochemical stability of solid electrolytes remains a challenge. A mechanism explaining the relationship between redox activity and electrochemical stability for typical solid electrolytes is now proposed.

The future development of low-cost, high-performance electric vehicles depends on the success of next-generation lithium-ion batteries with higher energy density. The lithium metal negative electrode is key to applying these new battery technologies. However, the problems of lithium dendrite growth and low Coulombic efficiency have proven to be difficult challenges to overcome. Fundamentally, these two issues stem from the instability of the solid electrolyte interphase (SEI) layer, which is easily damaged by the large volumetric changes during battery cycling. In this work, we show that when a highly viscoelastic polymer was applied to the lithium metal electrode, the morphology of the lithium deposition became significantly more uniform. At a high current density of 5 mA/cm2 we obtained a flat and dense lithium metal layer, and we observed stable cycling Coulombic efficiency of ∼97% maintained for more than 180 cycles at a current density of 1 mA/cm2.

Higher aridity and more extreme rainfall events in drylands are predicted due to climate change. Yet, it is unclear how changing precipitation regimes may affect nitrogen (N) cycling, especially in areas with extremely high aridity. Here we investigate soil N isotopic values (δ(15)N) along a 3,200 km aridity gradient and reveal a hump-shaped relationship between soil δ(15)N and aridity index (AI) with a threshold at AI=0.32. Variations of foliar δ(15)N, the abundance of nitrification and denitrification genes, and metabolic quotient along the gradient provide further evidence for the existence of this threshold. Data support the hypothesis that the increase of gaseous N loss is higher than the increase of net plant N accumulation with increasing AI below AI=0.32, while the opposite is favoured above this threshold. Our results highlight the importance of N-cycling microbes in extremely dry areas and suggest different controlling factors of N-cycling on either side of the threshold.

Photodynamic therapy (PDT) has shown the potential of triggering systemic antitumor immune responses. However, while the oxygen-deficient hypoxic tumor microenvironment is a factor that limits the PDT efficacy, the immune responses after conventional PDT usually are not strong enough to eliminate metastatic tumors. Herein, a light-triggered in situ gelation system containing photosensitizer-modified catalase together with poly(ethylene glycol) double acrylate (PEGDA) as the polymeric matrix is designed. Immune adjuvant nanoparticles are further introduced into this system to trigger robust antitumor immune responses after PDT. Following local injection of the mixed precursor solution into tumors and the subsequent light exposure, polymerization of PEGDA can be initiated to induce in situ gelation. Such hybrid hydrogel with long-term tumor retention of various agents and the ability to enable persistent tumor hypoxia relief can enable multiple rounds of PDT, which results in significantly enhanced immune responses by multiround stimulation. Further combination of such gel-based multiround PDT with anticytotoxic T-lymphocyte antigen-4 checkpoint blockade offers not only the abscopal effect to inhibit growth of distant tumors but also effective long-term immune memory protection from rechallenged tumors. Therefore, such a light-triggered in situ gelation system by a single-dose injection can enable greatly enhanced photoimmunotherapy by means of repeated stimulations.

Fluorogenic Cu(I)-catalyzed alkyne-azide cycloaddition (CuAAC) reactions have emerged as a powerful tool for bioconjugation, materials science, organic synthesis and drug discovery. This review highlights the design of the recent development of fluorogenic CuAAC reactions as well as their applications.

Despite the promising efficacy of immunoregulation in cancer therapy, the clinical benefit has been restricted by inefficient infiltration of lymphocytes in the evolution of immune evasion. Also, immune-related adverse events have often occurred due to the off-target binding of therapeutics to normal tissues after systematic treatment. In light of this, we have developed a synergistic immunotherapy strategy that locally targets the immunoinhibitory receptor programmed cell death protein 1 (PD1) and immunosuppressive enzyme indoleamine 2,3-dioxygenase (IDO) for the treatment of melanoma through a microneedle-based transcutaneous delivery approach. The embedded immunotherapeutic nanocapsule loaded with anti-PD1 antibody (aPD1) is assembled from hyaluronic acid modified with 1-methyl-dl-tryptophan (1-MT), an inhibitor of IDO. This formulation method based on the combination strategy of "drug A in carriers formed by incorporation of drug B" facilitates the loading capacity of therapeutics. Moreover, the resulting delivery device elicits the sustained release and enhances retention of checkpoint inhibitors in the tumor microenvironment. Using a B16F10 mouse melanoma model, we demonstrate that this synergistic treatment has achieved potent antitumor efficacy, which is accompanied by enhanced effective T cell immunity as well as reduced immunosuppression in the local site.

Aging and lipotoxicity are two major risk factors for gout that are linked by the activation of the NLRP3 inflammasome. Neutrophil-mediated production of interleukin-1β (IL-1β) drives gouty flares that cause joint destruction, intense pain, and fever. However, metabolites that impact neutrophil inflammasome remain unknown. Here, we identified that ketogenic diet (KD) increases β-hydroxybutyrate (BHB) and alleviates urate crystal-induced gout without impairing immune defense against bacterial infection. BHB inhibited NLRP3 inflammasome in S100A9 fibril-primed and urate crystal-activated macrophages, which serve to recruit inflammatory neutrophils in joints. Consistent with reduced gouty flares in rats fed a ketogenic diet, BHB blocked IL-1β in neutrophils in a NLRP3-dependent manner in mice and humans irrespective of age. Mechanistically, BHB inhibited the NLRP3 inflammasome in neutrophils by reducing priming and assembly steps. Collectively, our studies show that BHB, a known alternate metabolic fuel, is also an anti-inflammatory molecule that may serve as a treatment for gout.

Multimodal imaging and imaging-guided therapies have become a new trend in the current development of cancer theranostics. In this work, we encapsulate hydrophobic upconversion nanoparticles (UCNPs) together with iron oxide nanoparticles (IONPs) by using an amphiphilic block copolymer, poly (styrene-block-allyl alcohol) (PS(16)-b-PAA(10)), via a microemulsion method, obtaining an UC-IO@Polymer multi-functional nanocomposite system. Fluorescent dye and anti-cancer drug molecules can be further loaded inside the UC-IO@Polymer nanocomposite for additional functionalities. Utilizing the Squaraine (SQ) dye loaded nanocomposite (UC-IO@Polymer-SQ), triple-modal upconversion luminescence (UCL)/down-conversion fluorescence (FL)/magnetic resonance (MR) imaging is demonstrated in vitro and in vivo, and also applied for in vivo cancer cell tracking in mice. On the other hand, a chemotherapy drug, doxorubicin, is also loaded into the nanocomposite, forming an UC-IO@Polymer-DOX complex, which enables novel imaging-guided and magnetic targeted drug delivery. Our work provides a method to fabricate a nanocomposite system with highly integrated functionalities for multimodal biomedical imaging and cancer therapy.

The LaMnO3 and LaB0.2Mn0.8O3 (B = Co, Ni, Fe) perovskite-type oxides were prepared by the conventional co-precipitation method and studied as catalysts for the oxidation of vinyl chloride emission in the temperature range of 50–350 °C. Their physicochemical properties were characterized by ICP-AES, N2 adsorption, XRD, H2-TPR, O2-TPD and XPS. Catalytic performances were evaluated for the oxidation of 1000 ppm of VC in air at a GHSV of 15,000 h−1. The substituted LaB0.2Mn0.8O3 samples showed higher catalytic activity than pure LaMnO3. Characterization results revealed that the catalytic activity of the perovskite oxides was greatly related to the low-temperature reducibility of the B site and the amount of adsorbed oxygen species and vacancies on the surface. The surface adsorbed oxygen species played a key role in the catalytic reaction and oxygen vacancies promoted the oxygen mobility. A reaction mechanism of vinyl chloride oxidation over LaMnO3-based perovskite oxides was proposed.

Increasing evidence suggests that the presence of endotoxemia is of substantial clinical relevance to patients with cirrhosis, but it is unclear whether and how gut-derived LPS amplifies the tumorigenic response of the liver. We found that the circulating levels of LPS were elevated in animal models of carcinogen-induced hepatocarcinogenesis. Reduction of LPS using antibiotics regimen in rats or genetic ablation of its receptor Toll-like receptor 4 (TLR4) in mice prevented excessive tumor growth and multiplicity. Additional investigation revealed that TLR4 ablation sensitizes the liver to carcinogen-induced toxicity via blocking NF-κB activation and sensitizing the liver to reactive oxygen species (ROS)-induced toxicity, but lessens inflammation-mediated compensatory proliferation. Reconstitution of TLR4-expressing myeloid cells in TLR4-deficient mice restored diethylnitrosamine (DEN)-induced hepatic inflammation and proliferation, indicating a paracrine mechanism of LPS in tumor promotion. Meanwhile, deletion of gut-derived endotoxin suppressed DEN-induced cytokine production and compensatory proliferation, whereas in vivo LPS pre-challenge promotes hepatocyte proliferation.Our data indicate that sustained LPS accumulation represents a pathological mediator of inflammation-associated hepatocellular carcinoma (HCC) and manipulation of the gut flora to prevent pathogenic bacterial translocation and endotoxin absorption may favorably influence liver function in patients with cirrhosis who are at risk of developing HCC.

We report a binder-free stainless steel welded mesh@flower-like Mn₃O₄ composite with high zinc storage capability for aqueous zinc-ion batteries.

We combined reflection difference microscopy, electron transport measurements, and atomic force microscopy to characterize the mechanical and electrical anisotropy of few-layer black phosphorus. We were able to identify the lattice orientations of the two-dimensional material and construct suspended structures aligned with specific crystal axes. The approach allowed us to probe the anisotropic mechanical and electrical properties along each lattice axis in separate measurements. We measured the Young’s modulus of few-layer black phosphorus to be 58.6 ± 11.7 and 27.2 ± 4.1 GPa in zigzag and armchair directions. The breaking stress scaled almost linearly with the Young’s modulus and was measured to be 4.79 ± 1.43 and 2.31 ± 0.71 GPa in the two directions. We have also observed highly anisotropic transport behavior in black phosphorus and derived the conductance anisotropy to be 63.7%. The test results agreed well with theoretical predictions. Our work provided very valuable experimental data and suggested an effective characterization means for future studies on black phosphorus and anisotropic two-dimensional nanomaterials in general.

Recently, near‐infrared (NIR) absorbing conjugated polymeric nanoparticles have received significant attention in photothermal therapy of cancer. Herein, polypyrrole (PPy), a NIR‐absorbing conjugate polymer, is used to coat ultra‐small iron oxide nanoparticles (IONPs), obtaining multifunctional IONP@PPy nanocomposite which is further modified by the biocompatible polyethylene glycol (PEG) through a layer‐by‐layer method to acquire high stability in physiological solutions. Utilizing the optical and magnetic properties of the yielded IONP@PPy‐PEG nanoparticles, in vivo magnetic resonance (MR) and photoacoustic imaging of tumor‐bearing mice are conducted, revealing strong tumor uptake of those nanoparticles after intravenous injection. In vivo photothermal therapy is then designed and carried out, achieving excellent tumor ablation therapeutic effect in mice experiments. These results promise the use of multifunctional NIR‐absorbing organic‐inorganic hybrid nanomaterials, such as IONP@PPy‐PEG presented here, for potential applications in cancer theranostics.

Although considered promising materials for assisting organ regeneration, few hydrogels meet the stringent requirements of clinical translation on the preparation, application, mechanical property, bioadhesion, and biocompatibility of the hydrogels. Herein, we describe a facile supramolecular approach for preparing gelatin hydrogels with a wide array of desirable properties. Briefly, we first prepare a supramolecular gelatin macromer via the efficient host-guest complexation between the aromatic residues of gelatin and free diffusing photo-crosslinkable acrylated β-cyclodextrin (β-CD) monomers. The subsequent crosslinking of the macromers produces highly resilient supramolecular gelatin hydrogels that are solely crosslinked by the weak host-guest interactions between the gelatinous aromatic residues and β-cyclodextrin (β-CD). The obtained hydrogels are capable of sustaining excessive compressive and tensile strain, and they are capable of quick self healing after mechanical disruption. These hydrogels can be injected in the gelation state through surgical needles and re-molded to the targeted geometries while protecting the encapsulated cells. Moreover, the weak host-guest crosslinking likely facilitate the infiltration and migration of cells into the hydrogels. The excess β-CDs in the hydrogels enable the hydrogel-tissue adhesion and enhance the loading and sustained delivery of hydrophobic drugs. The cell and animal studies show that such hydrogels support cell recruitment, differentiation, and bone regeneration, making them promising carrier biomaterials of therapeutic cells and drugs via minimally invasive procedures.

Alloying is an important strategy for the design of catalytic materials beyond pure metals. The conventional alloy catalysts however lack precise control over the local atomic structures of active sites. Here we report on an investigation of the active-site ensemble effect in bimetallic Pd–Au electrocatalysts for CO2 reduction. A series of Pd@Au electrocatalysts are synthesized by decorating Au nanoparticles with Pd of controlled doses, giving rise to bimetallic surfaces containing Pd ensembles of various sizes. Their catalytic activity for electroreduction of CO2 to CO exhibits a nonlinear behavior in dependence of the Pd content, which is attributed to the variation of Pd ensemble size and the corresponding tuning of adsorption properties. Density functional theory calculations reveal that the Pd@Au electrocatalysts with atomically dispersed Pd sites possess lower energy barriers for activation of CO2 than pure Au and are also less poisoned by strongly binding *CO intermediates than pure Pd, with an intermediate ensemble size of active sites, such as Pd dimers, giving rise to the balance between these two rate-limiting factors and achieving the highest activity for CO2 reduction.

<h2>Summary</h2> Lowering total tau levels is an attractive therapeutic strategy for Alzheimer's disease and other tauopathies. High-throughput screening in neurons derived from human induced pluripotent stem cells (iPSCs) is a powerful tool to identify tau-targeted therapeutics. However, such screens have been hampered by heterogeneous neuronal production, high cost and low yield, and multi-step differentiation procedures. We engineered an isogenic iPSC line that harbors an inducible neurogenin 2 transgene, a transcription factor that rapidly converts iPSCs to neurons, integrated at the AAVS1 locus. Using a simplified two-step protocol, we differentiated these iPSCs into cortical glutamatergic neurons with minimal well-to-well variability. We developed a robust high-content screening assay to identify tau-lowering compounds in LOPAC and identified adrenergic receptors agonists as a class of compounds that reduce endogenous human tau. These techniques enable the use of human neurons for high-throughput screening of drugs to treat neurodegenerative disease.

A UiO type MOF with Lewis basic bipyridyl sites was synthesized and structurally characterized. After being activated by Soxhlet-extraction, this MOF exhibits high storage capacities for H2, CH4 and CO2, and shows unusual stepwise adsorption for liquid CO2 and solvents, indicating a sequential filling mechanism on different adsorption sites.

A sulfur composite cathode material based on 3D N-doped graphene has a high sulfur content of 87.6 wt% and shows an excellent rate capability and cyclability.

Lithium sulfide (Li2S) is a promising cathode material for Li–S batteries with high capacity (theoretically 1166 mAh g–1) and can be paired with nonlithium–metal anodes to avoid potential safety issues. However, the cycle life of coarse Li2S particles suffers from poor electronic conductivity and polysulfide shuttling. Here, we develop a flexible slurryless nano-Li2S/reduced graphene oxide cathode paper (nano-Li2S/rGO paper) by simple drop-coating. The Li2S/rGO paper can be directly used as a free-standing and binder-free cathode without metal substrate, which leads to significant weight savings. It shows excellent rate capability (up to 7 C) and cycle life in coin cell tests due to the high electron conductivity, flexibility, and strong solvent absorbency of rGO paper. The Li2S particles that precipitate out of the solvent on rGO have diameters 25–50 nm, which is in contrast to the 3–5 μm coarse Li2S particles without rGO.

Abstract Photothermal therapy (PTT), as a minimally invasive and highly effective cancer treatment approach, has received widespread attention in recent years. Tremendous effort has been devoted to explore various types of photothermal agents with high near‐infrared (NIR) absorbance for PTT cancer treatment. Despite many exciting progresses in the area, effective yet safe photothermal agents with good biocompatibility and biodegradability are still highly desired. In this work, a new organic PTT agent based on polyethylene glycol (PEG) coated micelle nanoparticles encapsulating a heptamethine indocyanine dye IR825 is developed, showing a strong NIR absorption band and a rather low quantum yield, for in vivo photothermal treatment of cancer. It is found that the IR825–PEG nanoparticles show ultra‐high in vivo tumor uptake after intravenous injection, and appear to be an excellent PTT agent for tumor ablation under a low‐power laser irradiation, without rendering any appreciable toxicity to the treated animals. Compared with inorganic nanomaterials and conjugated polymers being explored in PTT, the NIR‐absorbing micelle nanoparticles presented here may have the least safety concern while showing excellent treatment efficacy, and thus may be a new photothermal agent potentially useful in clinical applications.

Erythrocytes or red blood cells (RBCs) represent a promising cell-mediated drug delivery platform due to their inherent biocompatibility. Here, we developed an antigen delivery system based on the nanoerythrosomes derived from RBCs, inspired by the splenic antigen-presenting cell targeting capacity of senescent RBCs. Tumor antigens were loaded onto the nanoerythrosomes by fusing tumor cell membrane-associated antigens with nanoerythrosomes. This tumor antigen-loaded nanoerythrosomes (nano-Ag@erythrosome) elicited antigen responses in vivo and, in combination with the anti-programmed death ligand 1 (PD-L1) blockade, inhibited the tumor growth in B16F10 and 4T1 tumor models. We also generated a tumor model showing that "personalized nano-Ag@erythrosomes" could be achieved by fusing RBCs and surgically removed tumors, which effectively reduced tumor recurrence and metastasis after surgery.

A dual Z-scheme photocatalyst AgI/Ag3PO4/g-C3N4 (AAC) is prepared by an in-situ ion exchange method from Z-scheme Ag3PO4/g-C3N4. This dual Z-scheme photocatalyst exhibits higher activity for the degradation of nitenpyram (NTP) than pure g-C3N4, Ag3PO4 and AgI and their binary composites. The apparent rate constant of NTP degradation for the optimal sample (0.76 min−1) is about 16.2, 2.4 and 2.9 times as that of g-C3N4, Ag3PO4 and AgI, respectively. The results of photoluminescence spectroscopy and transient photocurrent response show that the separation efficiency of photogenerated electrons and holes for AAC is significantly improved, which is beneficial to improve its photocatalytic activity. Active species capture experiments and electron spin resonance spectra show that superoxide radicals and holes are the main active substances for NTP degradation and prove the formation of Z-scheme structure. In addition, basing on the results of high-performance liquid chromatography mass spectrometry, a possible degradation pathway of NTP is deduced.

An up-flow anaerobic sludge blanket reactor-microbial fuel cell-biological aerated filter (UASB-MFC-BAF) system was developed for simultaneous bioelectricity generation and molasses wastewater treatment in this study. The maximum power density of 1410.2 mW/m(2) was obtained with a current density of 4947.9 mA/m(2) when the high strength molasses wastewater with chemical oxygen demand (COD) of 127,500 mg/l was employed as the influent. The total COD, sulfate and color removal efficiencies of the proposed system were achieved of 53.2%, 52.7% and 41.1%, respectively. Each unit of this system had respective function and performed well when integrated together. The UASB reactor unit was mainly responsible for COD removal and sulfate reduction, while the MFC unit was used for the oxidation of generated sulfide with electricity generation. The BAF unit dominated color removal and phenol derivatives degradation. This study is a beneficial attempt to combine MFC technology with conventional anaerobic-aerobic processes for actual wastewater treatment.

In this paper, we propose a deep reinforcement learning (DRL)-based method that allows unmanned aerial vehicles (UAVs) to execute navigation tasks in large-scale complex environments. This technique is important for many applications such as goods delivery and remote surveillance. The problem is formulated as a partially observable Markov decision process (POMDP) and solved by a novel online DRL algorithm designed based on two strictly proved policy gradient theorems within the actor-critic framework. In contrast to conventional simultaneous localization and mapping-based or sensing and avoidance-based approaches, our method directly maps UAVs' raw sensory measurements into control signals for navigation. Experiment results demonstrate that our method can enable UAVs to autonomously perform navigation in a virtual large-scale complex environment and can be generalized to more complex, larger-scale, and three-dimensional environments. Besides, the proposed online DRL algorithm addressing POMDPs outperforms the state-of-the-art.

The recent years have witnessed the blooming of cancer immunotherapy, as well as their combinational use together with other existing cancer treatment techniques including radiotherapy. However, hypoxia is one of several causes of the immunosuppressive tumor microenvironment (TME). Herein, we develop an innovative strategy to relieve tumor hypoxia by delivering exogenous H2O2 into tumors and the subsequent catalase-triggered H2O2 decomposition. In our experiment, H2O2 and catalase are separately loaded within stealthy liposomes. After intravenous (iv) preinjection of CAT@liposome, another dose of H2O2@liposome is injected 4 h later. The sustainably released H2O2 could be decomposed by CAT@liposome, resulting in a long lasting effect in tumor oxygenation enhancement. As the result, the combination treatment by CAT@liposome plus H2O2@liposome offers remarkably enhanced therapeutic effects in cancer radiotherapy as observed in a mouse tumor model as well as a more clinically relevant patient-derived xenograft tumor model. Moreover, the relieved tumor hypoxia would reverse the immunosuppressive TME to favor antitumor immunities, further enhancing the combined radio-immunotherapy with cytotoxic T lymphocyte-associated antigen 4 (CTLA4) blockade. This work presents a simple yet effective strategy to promote tumor oxygenation via sequential delivering catalase and exogenous H2O2 into tumors using well-established liposomal carriers, showing great potential for clinical translation in radio-immunotherapy of cancer.

Crowdsensing applications utilize the pervasive smartphone users to collect large-scale sensing data efficiently. The quality of sensing data depends on the participation of highly skilled users. To motivate these skilled users to participate, they should receive enough rewards for compensating their resource consumption. Available incentive mechanisms mainly consider the truthfulness of the mechanism, but mostly ignore the issues of security and privacy caused by a “trustful” center. In this paper, we propose a privacy-preserving blockchain incentive mechanism in crowdsensing applications, in which a cryptocurrency built on blockchains is used as a secure incentive way. High quality contributors will get their payments that are recorded in transaction blocks. The miners will verify the transaction according to the sensing data assessment criteria published by the server. As the transaction information can disclose users’ privacy, a node cooperation verification approach is proposed to achieve <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$k$ </tex-math></inline-formula> -anonymity privacy protection. Through theoretical analysis and simulation experiments, we show the feasibility and security of our incentive mechanism.

Although cancer immunotherapy based on immune checkpoint inhibitors holds great promise toward many types of cancers, several challenges still remain, associated with low objective response of patient rate as well as systemic side effects. Here, a combination immunotherapy strategy is developed based on a thermogelling reactive oxygen species (ROS)-responsive polypeptide gel for sustained release of anti-programmed cell death-ligand 1 antibody and dextro-1-methyl tryptophan, inhibitor of indoleamine-2,3-dioxygenase with leveraging the ROS level in the tumor microenvironment. This bioresponsive gel depot can effectively reduce the local ROS level and facilitate release of immunotherapeutics, which leads to enhanced anti-melanoma efficacy in vivo.

One-pot extraction combined with the metal-free photochemical aerobic oxidative deep-desulfurization of fuels in deep eutectic solvents was successfully achieved.

A variety of studies indicated that inorganic arsenic and its methylated metabolites have paradoxical effects, namely, carcinogenic and anticancer effects.Epidemiological studies have shown that long term exposure to arsenic can increase the risk of cancers of lung, skin or bladder in man, which is probably associated with the arsenic metabolism.In fact, the enzymatic conversion of inorganic arsenic by Arsenic (+3 oxidation state) methyltransferase (AS3MT) to mono-and dimethylated arsenic species has long been considered as a major route for detoxification.However, several studies have also indicated that biomethylation of inorganic arsenic, particularly the production of trivalent methylated metabolites, is a process that activates arsenic as a toxin and a carcinogen.On the other hand, arsenic trioxide (As 2 O 3 ) has recently been recognized as one of the most effective drugs for the treatment of APL.However, elaboration of the cytotoxic mechanisms of arsenic and its methylated metabolites in eradicating cancer is sorely lacking.To provide a deeper understanding of the toxicity and carcinogenicity along with them use of arsenic in chemotherapy, caution is required considering the poor understanding of its various mechanisms of exerting toxicity.Thereby, in this review, we have focused on arsenic metabolic pathway, the roles of the methylated arsenic metabolites in toxicity and in the therapeutic efficacy for the treatments of solid tumors, APL and/or non-APL malignancies.www.impactjournals.com/oncotargetexposure to arsenic is related to severe adverse health effects including dermatitis, cardiovascular diseases, diabetes mellitus, chronic bronchitis, immune disorders, peripheral neuropathy, liver damage, renal failure, adverse reproductive outcomes, hematological effects, and other ailments [14][15][16][17][18][19][20][21].In fact, arsenic affects almost all vital organs of human body causing the damage or dysfunction.Along with the adverse health effects, social and economical problem also occurs for the population of the arsenic affected countries.On the other hand, arsenic trioxide (As 2 O 3 ) has been used as a drug for the treatment of various diseases in ancient China and Greece for over 3000 years [22].In addition, As 2 O 3 (Figure 1A) has www.impactjournals.